How to Make a One Person Brake Bleeder for Under $5

Подписаться 10 млн

Просмотров 2,5 млн

50% 1

How to bleed brakes using the one person method. Learn how to make your own one person brake bleeder using a plastic bottle and a clear hose for under $5. With this one person brake bleeder you can bleed or flush your brakes completely by yourself and you wont get any air in the system.
Here is the tubing you need for the brake bleeder: amzn.to/1RQyTyF
How to Flush Your Brake Fluid COMPLETELY: • How to do a Complete B...
Wheel Cylinder Replacement: • How to Replace a Wheel...
How to Replace Drum Brakes: • How to Change Drum Bra...
Everything you Need to Know About Brake Fluid: COMING SOON
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed.com
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: ru-vid.com_c...
-RU-vid Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Авто/Мото

Опубликовано:

28 июл 2014

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,4 тыс.

@SomnoNaut 5 лет назад

Chris, I wish to thank you for: 1) Not treating viewers like idiots 2) Not having massive commentary as other channels do 3) Having minimal product placement 4) Having very goo camera angles and technique 5) Just being all around "matter of factly" not professorial or all knowing

@FarWesternGarrison 4 года назад

Loved not seeing a drill placement in this vid.

@rkgsd 4 года назад

"very goo"? Anyway most big RU-vid publishers know the success of their channel and the money they make on it is dependent on how many viewers and subscribers they get. Treating viewers like idiots would therefore be suicidal.

@Senkino5o 3 года назад

Lol, this video's six years old now bud, he's gone whole hog on the product placement and flashy techniques.

@ephraimcamacho9600 3 года назад

Yes I agree! Love the way he puts his video info together so well!!

@SomnoNaut 3 года назад

@@rkgsd Oh really is that how it works/ Duh

@2010compguy 9 лет назад

Chris Fix I just flushed the brakes on my dads jeep. $4 and I had my own bottle saving me money compared to the bleeding system. Your flush video was a big help and useful! Keep the how to videos coming!! Thanks again!

@chrisfix 9 лет назад

Stephen Taylor Awesome Stephen! I am glad the video helped and great job doing the work yourself!

@dad1432 5 лет назад

Clear and helpful. Thanks!

@victorcontreras6750 9 лет назад

I have been a commercial jet mechanic for 21 years and you totally rock. I learn something new every day ! Your videos are informative, easy to understand and show that there's more than one way to skin a cat! Thanks for your time and effort in putting these together and coming up with great topics !

@chrisfix 9 лет назад

victor contreras Thanks a lot Victor! I am glad a professional like yourself is learning something new with my videos! That is great!

@oxidizedolive Год назад

I just wanted to say that with your tutorials coming in at over a decade of production, it's amazing to look back and see the kind of quality videos you put together so long ago. Keep it up brother. 🔥

@Scott_Shafner Год назад

Just flushed my brakes for the first time - I love your videos above everyone else's. They are so clear, good lighting, and you get right to the instruction without wasting my time. Awesome videos.

@clintblackx 5 лет назад

I made one of these and used it last night on my brakes. I realized that the brake fluid on my 09 Traverse has NEVER been changed. It looks just like the fluid in your brake flush video. Thanks for the tip, Chris! Very useful tool!

@chaplainand1 3 года назад

Hey Chris Thank you for all your videos. I am a DIY mechanic so I don't do a lot anymore. I have done many brake jobs and made a bleeder like yours from a peanut butter container. Works well. When I had an F250, I did a brake bleed on it - I understand doing a bleed every three years or so is recommended. I am doing a full brake job on our 2011 Subaru Forester over the next few days. On the video for that, I learned a few new things. Very grateful for the OUTSTANDINGLY WELL DONE video. This video is the best one I've seen on this topic. I appreciate your teaching skills.

@zhooted5508 8 лет назад

Take the cap off first and you wont have to clean the bottle again,also it will be a lot more stable when drilling it.

@jasondeaver2117 3 года назад

Just dont do it that way on concrete but yeah thats smarter

@jonathanwright7991 2 года назад

Call me lazy, but if you just hold the cap, you don't have to clean the shavings out of the bottle.

@MsSkullzone 8 лет назад

Totally useful , informative, money saving and clearly explained.

@alberttibbets6567 2 года назад

Thank you! I was anxious about bleeding the brake lines after replacing the calipers in my 1998 Camry. I followed your instructions and it worked great. I could not believe how simple you made this job.

@grahamnichols2635 8 лет назад

You really saved my ass over the last couple days between this video and a couple of your other ones. I really want to thank you, because I seriously would have been up the creek without your help. So thank you, Sir, very much!

@chrisfix 8 лет назад

+Graham Nichols I am glad my videos have been super helpful!

@unfundedopportunities7278 7 лет назад

You stand the plastic bottle inside something like an empty glass pickle jar. The jar keeps the bottle upright, and is wide enough and heavy enough not to tip over easily.

@peterford9369 7 лет назад

UnFunded Opportunities Good tip.

@mopenstein 4 года назад

Why not just use the pickle jar then?

@pmfap 4 года назад

@@mopenstein Because you need the level of the fluid inside the container to be high enough. A recipient with a wide base will have a shallow level of oil compared with a narrower bottle.

@death_dealer_382yt9 4 года назад

I've never had a problem with my plastic bottle tipping over

@michaelbelden1013 3 года назад

Genius

@femalegarage 8 лет назад

Wow, that's brilliant! I've bled my brakes this way after watching your video. Thanks a million!

@whoami7566 3 года назад

The amount of work I have put into my imapala was finally totalled today. With every thing I replaced I called my local mechanic for a quote and after all new breaks rotors calipers and brackets new fluids plugs wires and so much more I have saved $3500!!!! I'm blown away. I was impressed by this channel to begin with now I'm simply blown away. Words can't express enough how thankful I am. You're the best dude!!!!

@robertholsopple9451 4 года назад

Made this bleeder today and used it on a 4 wheel brake job. Loved it. Thank you for stating the size of the tube. I used the same bottle as you and didnt realize it till now.

@mikecioka1180 8 лет назад

how some one can thumb down a video like this one? provably a dealer who want to sell this tool for 30$ :(

@chrisfix 8 лет назад

+mike cioka Thanks bud! Haters gonna hate.

@mikecioka1180 8 лет назад

+ChrisFix Thanks to you for helping us :) I saving a lot of money !

@fortuner123 8 лет назад

Thumbs down because it can recontaminate the calliper with aerated fluid as it is sucked back.

@fjpa654 8 лет назад

+577666 well.. why don't you show us all the cheapest AND proper way to do it, and up-load your OWN video? CLEARLY he changed the break fluid, and the fluid was C-L-E-A-R.

@ROBMCKISSOCK 8 лет назад

+577666 not if you bleed the line till the hose is full of clear fluid, like you're supposed to, then it will only suck in clean new fluid

@krissrock 7 лет назад

yeah, good shit. I've been using this "fix" for probably 10 yrs now...Waayyyy less mess. I've never tried using a zip-tie, but that's a good idea fo sho

@violeman 7 лет назад

My Dad, that has been a Mechanic for GM since he was 20 and is 68 now, told me to put a hose on my bleeder screw then submerge it in break fluid tonight if I was having a big problem bleeding my ATV brake system!! It is awesome that you are doing the same thing and explained it better to me lol... Thanks!! DEv

@MazdaMitch 7 лет назад

Thanks for your time creating this video, and the other video of you using it to bleed the brakes. I would have never thought to do it this way. I have always used another person to help, but thanks to your video I no longer have to bother anyone and I have used this method several times on brakes and clutches. Thanks a ton. Keep it up.

@HassanEido1 8 лет назад

Thank you Chris! I just did my own brake flush on my car, and wow, the fluid came out black and air bubbles came out. Now my brakes are firm at the top of the pedal and no more fade! I followed this video and the other video on how to flush the fluid and it was a breeze. Great work man

@donnywilliams4448 7 лет назад

dude your videos are great for DIY people

@KashifKhan-cs3nx 6 лет назад

Thanks Chris for making this video. I watched it a few years ago and My car was due to bleed brakes and today when I was doing it. I thought to thank you as you made it so simple that it was fun to do while playing your video in the background.

@stmtom2811 7 лет назад

Thank you Chris! I used this to flush the brake fluid on a 2004 Ford escape. Made it so quick and easy.

@MrFuriousG 9 лет назад

Abraham Lincoln called, said he want's his electric drill back..

@chrisfix 9 лет назад

MrFuriousG He said it was ok if I borrowed it.

@JustAboutAnything66 9 лет назад

+MrFuriousG In the words of Indiana Jones "It belongs in a museum!" +Chrisfix My late father-in-law left me a sander and router that may have been a few years older than your drill. They were lovely tools but I rarely used them because they weighed about 50 pounds, hahaha. Some crack head stole them a few years back. They are probably floating around the country as soda cans. So cheers to the drill! Anyway, I just wanted to say your videos are very well done, thanks.

@chrisfix 9 лет назад

lilwoodboy Thanks a lot man and thanks for sharing the story lol. Cant beat using old tools. My dad loves it when he sees me using tools his dad gave to him. I recently used a square for welding up "Project Night Light" and my father was so happy when he saw the video haha.

@GarthGoldberg 9 лет назад

ChrisFix I've got the same drill. Black and Decker from the 1970's. I opened the gear case and put some new grease in. Still works great. Nice and small.

@chrisfix 9 лет назад

Garth Goldberg No wayyyy! Awesome! I should do the same thing!

@flumoxeduk2379 8 лет назад

if you use soft rubber tubing and put a small longitudinal slit (10mm) near the bottom (not to the bottom -kinda like a flute really ) and then a bolt/bung in the bottom to seal the end it will act like a 1 way valve and improve you bleeder :)

@johnvanderpol9059 6 лет назад

That's real good idea,use a heavy bolt and it will lay on the bottom, top idea!

@condor5635 5 лет назад

Peter Gabbott -awesome idea. Just yesterday doing my brakes with the same setup here I was wonder about how to incorporate a one way valve. This is an awesome idea - at least I understand it and it does sound like it would work. Thanks!

@AllanO808 4 года назад

That's old school and works perfectly.

@JuanLopez-lu5ox 5 лет назад

I used your method to bleed the rear drum brakes on my '05 civic and it worked liked a charm! Thank you for the video!

@MultiGazman 5 лет назад

Always nice to see people thinking for themselves, just a couple of things, take the top off before drilling it, Use a drill bit that matches the outside diameter (OD) not the inside of the tubing, No need to use a pilot hole for plastic, just make the holes you need in the sizes you need them. Thanks for the vid

@MrDeadInMyPocket 7 лет назад

I used a medium sized glass peanut butter jar. (Yes you can still buy those. Maybe a glass mason jar will work too) It's not too big and the weight helps it stay upright. Have had it fifteen years now and still going.

@chrisfix 7 лет назад

Good idea!

@APZ2187 7 лет назад

damn dude you replied on a comment from two days ago on a vid thats old two years RESPECT!

@amb2745 5 лет назад

Now I know what to do when I go back to work tomorrow: Buy a bottle of Powerade from the soda machine.

@speed488 6 лет назад

Thanks for the vid Chris! Always appreciated! Now, the only problem I have to deal with is my snapped bleeder valve. This is how you turn a brake fluid flush into a full caliper job.

@gerardozamora5708 5 лет назад

All these videos have helped! One of my pistons seized and I’ve had to replace calibers rotors and pads. Luckily I have a 2002 Mazda b3000 so your videos are perfect!

@georgewomack8260 4 года назад

Just watched your video. Great job explaining the how 2. I just finished mine and the brakes work great thank you for the wonderful video I wish all videos was as to the point as yours.

@BostonBorn 7 лет назад

2nd day of binge watching #chrisfix 💕 You rock for making great DIY auto videos!!!

@chrisfix 7 лет назад

+Kelly Dolan thanks for all the support!!!

@garnetnard4284 3 года назад

I’m on week two and I’ve already ordered $600 in parts for my car. I’ve never even changed my oil before this.

@mrcoz1764 7 лет назад

the od of a 1/4" hose is 3/8 so use a 5/16 drill bit to make ur hole,,,

@paulinoeugenia2660 4 года назад

Respectful and to the point 👍🏽✋🏽

@Mikeaawwck 3 года назад

Yeah i used a 5/16 also. 1/4 didn’t help much.

@ALEXCASTILLO-oye 8 лет назад

Thanks Chris! Used it last night on my son's car. Works perfectly!!!

@afeodtech 7 лет назад

Just came across this video and used it to change my brake fluid. Worked perfectly! Thank you for the great info.

@TexasPLNR 10 лет назад

A slight variation for a one man bleeder would replace vent hole w/ a 1/4" hole and use a hand vacuum pump/tube to lower pressure in bottle to pull brake fluid from system. This avoids leaving brake assy location to pump the brake fluid out. For this variation a glass bottle must be used as thin plastic will collapse due to vacuum created w/ hand pump. With this variation of one man bleeding, some bubbles will enter brake fluid stream at the loosened bleeder due to pressure differential, however no air is introduced into brake system.. Some use grease around bleeder to prevent this, but it's not necessary. I've also found that the clear (acrylic?) plastic tubing tends to harden due to brake fluid making subsequent use very difficult. Rubber surgical tube resists hardening and remains flexible after exposure to brake fluid. Nice video. Regards

@chrisfix 10 лет назад

TexasPLNR Thanks for the tips!

@norahschrum 6 лет назад

Where do you get surgical tubing locally? Like what kind of store should I search for?

@xrain099 5 лет назад

@@norahschrum Lowes or homedepot has them or latex tubing thing. But they are way more expensive than vinyl tubing.

@mrbreezeet1 2 года назад

We had this gallon can of brake fluid where I worked one time, and it had a pump on it like a liquid soap bottle, so you could fill the master cylinder. We used to open the bleeder valve, and pump fluid up into the master cylinder, worked quite well.

@shanefrank3281 Год назад

After using vacuum to bleed I switched to pressure. Vacuum worked ok for me, but sometimes you get air coming in where the hose fits on the nipple or around the threads of the nipple and it makes you think you have air in the system when you don't.

@kpb96m 9 лет назад

Holy crap this was very helpful. ChrisFix, you are the man!!

@chrisfix 9 лет назад

kpb96m Gladf the video was helpful!

@rigoletotobon8176 4 года назад

Great + useful clip!!! I bought 1 at the autoparts and it melted down during the first use due to brake fluid chemicals. Thank you Mr C.F.

@shanemoser4090 4 года назад

I just made this and used it. It worked great! Quick and easy. Thanks Chris!

@cjburch63 8 лет назад

Thanks so much for creating and posting your how-to videos. Your narration, videography, and helpful tips have helped me greatly in working on my '93 Jeep Grand Cherokee.

@freeagent8225 4 года назад

When my brother visits I get him to pump the brakes, it's good to work together and helps us bond. Been through 2 wills and we still talk, not everyone can say that.

@GetUpFalcon 3 года назад

That mate is the fucking truth! Congrats.

@christianrooney3624 6 лет назад

Thank you Chris for providing how to video using tools we already have. Makes life much easier.

@Honkytonkitis 8 лет назад

Great video and thank you very much! I was just getting ready to buy a brake bleeder at a local store when I saw this video in my search. Now I can bleed my 47 Plymouth's brakes by myself. Thank you again! Two thumbs up!

@chrisfix 8 лет назад

+Honkytonkitis Thanks! Let me know how it goes!

@GenerationGap69 4 года назад

Pilot hole for a plastic lid? Ok, he’s thorough.

@zackr4667 3 года назад

exactly what i was thinking

@jasondeaver2117 3 года назад

They do crack easy if colder than 65 degrees

@camdendexter 3 года назад

Keeps the larger bit from wandering.

@Larry_Harvilla 8 лет назад

Having bought the tubing yesterday, I'm going to add a small but important detail that Chris neglected to mention: pay attention to both the inside diameter (ID) and outside diameter (OD) of the tubing. As Chris' drill bit demonstration at 0:51 shows, he was using 1/4" ID tubing, not 1/4" OD, and then he notes at 2:09 that the hose wouldn't fit through a 1/4" hole in the cap and he had to enlarge the hole some more. The 1/4" ID tubing I bought at Home Depot has an OD of 3/8", and thus would require a 3/8" hole in the cap to fit properly. So if this otherwise excellent video inspires you to make one of these for yourself, remember that you need to have both diameters in mind: the ID to match your bleeder screws, and the OD for the size of the hole you drill in your bottle cap.

@QuantumRift 8 лет назад

+Larry Harvilla It could have been said better: Get a length of tubing that fits your bleeder valve nipple. Now punch a hole thru the plastic cap of a 20 ounce drink bottle (not water bottle, too unstable) that is the same size as your tubing. Make a small vent hole. Done.

@marquisl2313 5 лет назад

Thanks. You said it perfectly. He did make that small mistake. I made the same mistake when I bought the tubing. No biggie though... Chris is still The Man and has given me the balls to fix things I never would have had if it wasn't for his videos. Thanks brutha. Keep up the great work!

@amb2745 5 лет назад

Chris could have also taken the drill bit out of the drill and hand turned the drill into the hole to get the shavings off the hole as well as slightly enlarge the hole. If it's off by only a little, doing that should help.

@DaveOfAllMasterOfNone 7 лет назад

+ChrisFix Worked awesome man! I was adjusting my parking brake and I forgot to compress one of the brake pistons. I was checking to see if the adjustment was working by starting the car and applying the parking break to see if the hubs stopped. I had one side adjusted but still disassembled and working on the driver side. Put on the brakes by force of habit to put it back into park and the piston popped out and there was brake fluid everywhere. I thought I was boned hardcore... Anyway after I got the piston back in I came to the conclusion that I needed to bleed the brakes (never done it before). I watched your video, took trip to Home Depot for som 1/4" ID tube and Walmart for brake fluid (and Gatorade), built the rig and less than 30 min later I was back in business. Thanks for the video and for saving me $30 on a bleeder. You are the man! I am already subscribed but I will keep watching and keep "liking" the videos.

@hugonubario 2 года назад

I just tested it few hours ago while changing my rear brake lines man that's awesome! it works greatly! thanks for the trick!

@kneesee100 7 лет назад

Chris I absolutely love your videos. You may however want to reconsider using that drill. The old 2-wire, non-grounded, non-"double insulated" power tools are DEATH waiting to happen and NOT easy to let go of when the electricity begins to flow through your body! Read this on a website so you may want to research that a little further. Our company no longer allows us to use them. Stick with the Ryobi!! Anyways keep making those awesome videos.....

@chrisfix 7 лет назад

+kneesee100 thanks a lot! Yes that's an old school drill. I won't use it anymore because that makes a lot of sense!

@dtrrtd774 7 лет назад

kneesee100 isn't it amazing how people survived back then without all the safety considerations of modern day? no seat belts, no helmets, slingshots, pocket knives, BB rifles taking kid's eyes out, leaded fuel, etc etc LOL

@mtnmosin2740 5 лет назад

sad thing is granpas drill still works.....ive been through several "new" and "improved" "safe" drills....

@-CCdude 7 лет назад

Also this is a trick I do so as not to waste brake fluid. Take a old ear syringe and suck out the old brake fluid in the master cylinder down to just above the holes for the fluid to go out. You may have to remove a plastic screen in some master cylinders which is there to keep junk out of your brake system, drop the screen back in if it had one. Then fill with new fluid and do the brake bleed as normal for your car or truck, this way you start with mostly new fluid instead of pushing old fluid through the system.

@michaelbray6010 10 месяцев назад

Simple, cheap, effective. It worked great! Thanks for yet another really helpful video!

@davidkaczmarek8551 7 лет назад

Worked great. Saved a lot of time and I didn't have to get my gf to come out to the garage to help me bleed the brakes on her truck after I replaced her rear brakes. Thanks man. Love your videos

@rklein20 5 лет назад

Drill the hole in bottle cap to match the OUTSIDE DIAMETER of the tubing, not the INSIDE DIAMETER.

@PneumaticFrog 3 года назад

i just melt a hole with a lighter and shove the tube in.

@arleyrivas9963 7 лет назад

I need a link to a blue POWERade bottle

@chrisfix 7 лет назад

+Arley Rivas lol

@arleyrivas9963 7 лет назад

ChrisFix thanks for replying lol and thanks for the video I needed to replace my break booster but I have to disconnect the brake lines from the master cylinder but I didn't know how to bleed the breaks on my own.

@thereagauze 6 лет назад

also do you have to use the free-with-a-coupon harbor freight scissors to cut the tubing or will any scissors work?

@HankHill1 5 лет назад

@@thereagauze LOLOLOL

@usa67us 5 лет назад

7-11 has them in stock.

@olmangolf 7 лет назад

I like the shine you put on your old Black and Decker drill. Have the same one still works great after 40 years.

@Bladerunner4511 7 лет назад

Great advice love the way you use imperial measurements good old school we are all metric in the uk thanks for sharing

@aboodalblushi1742 6 лет назад

Sometimes i want to subscribe to ur channel twice 😂😂,,,

@crustyHO 8 лет назад

And after you get done bleeding your brakes, you can use it as a bong! Brilliant!

@MrLongboarder94 8 лет назад

+CrustyHO And brake fluid is a nerve toxin so you might catch an extra buzz!

@amopastorcanadense 8 лет назад

+CrustyHO hahahahahahaha

@MRWDL800 8 лет назад

hahahahahahaha

@FourDollaRacing 7 лет назад

More like a hookah....

@sethpepper4750 7 лет назад

Yhall stuiped

@stephenbrock1061 4 года назад

Love ChrisFix's videos. Straight to the point and very informative.

@vanslowlee2186 2 года назад

Brilliant stuff thanks Chris I’m going to bleed my breaks weekend just for a fluid change as part of a home service and this is a massive help to get some tips 👍

@twistalimes8351 8 лет назад

Just used a 32 oz plastic (speedway) convenience store cup and double layer plastic lid. Eli inmates the whole drill a hole and a air hole into a water bottle issue and allows for a wider base. Hose slides right in. Taiduh!

@agentnuget 8 лет назад

I plan to make one of these that I can use to bleed the brakes on a motorcycle I plan to buy soon.. :)

@chrisfix 8 лет назад

+nuget102 Awesome!

@sincable_9757 4 года назад

Just finished doing this saved me from having to get crap I dont need.keep up the great job and vids

@Elitecommando501 8 лет назад

currently watching all of your vids because im starting a career on auto technician in 2 years. You are very easy to understand. Keep up the good videos!

@chrisfix 8 лет назад

+Elitecommando501 Awesome! Glad the videos are helpful!

@lucianonarno1408 7 лет назад

Awesome tip: Use superglue or epoxy to attach a 5 inch by 5 inch piece of wood or MDF to the base to make a wide base for the bottle and make sure it doesn't tip over.

@TheSuburban15 7 лет назад

Yeah, you could do that, or just sit the bottle in the hole of a roll of duct tape.

@stephenlam4529 7 лет назад

Luciano Narno Or Clear hair gel jar which is wide and shallow.

@lmind2 7 лет назад

Instructions unclear: monkey drank brake fluid, flew into a fluid-filled rage, dropped a donkey-sized dump on my new rotors and drove off

@peterford9369 7 лет назад

Luciano Narno another good tip.

@jerrymconners 9 лет назад

I prefer the old style hand-crank drill. Could you post another video using this tool? Also to save time, when you drill the "pilot hole".... why not drill the "vent hole" at that time? Yep, I am a genius!

@Jacobhaliti 4 года назад

The most simple and perfect video at the same time on internet. Fast info without talking other crap like other people. Thanks bud

@chrisfix 4 года назад

Thanks a lot!

@michael184272 4 года назад

Chris...#1 videos on everything.. Very interesting and of course informative... thanks for sharing

@Shane-Singleton 7 лет назад

That drill looks ancient! :)

@ThunderRoadDreams 7 лет назад

hallis1 and that's why it still works , new tools are mostly made no where near as good as old ones

@Shane-Singleton 7 лет назад

I agree 100% that's why when I go shopping for tools I usually do it in pawn shops.

@DaytonCarCare 6 лет назад

Older tools are better quality vs the Chinese crap they make now days

@wobluemoon 6 лет назад

It's an impact driver

@death_dealer_382yt9 4 года назад

@@wobluemoon no it's just a standard drill

@TheLogicalViolinist 8 лет назад

I think OSHA would like to talk to you about @2:17

@QuantumRift 8 лет назад

+TheLogicalViolinist OSHA has nothing to do with this. He's not being paid to make the video or product.

@RunsWithKnives 8 лет назад

+QuantumRift Don't worry just another one that believes we should nerf the world and everyone should have a safe space.

@QuantumRift 8 лет назад

+Runs With Knives LoL..."Doing that which no one can do for ones self."

@misfitthemad276 6 лет назад

I have a mate who drilled into his finger a little bit and the drill caught a tendon and ripped it out by the roots. I'm really careful with drills around my hands now.

@drizler 5 лет назад

He’s a private individual not a business. He can tell OSHA to stick it in a warm dark place and snap it off. I SURE WOULD, and quite legally too!

@chasevogt2090 5 лет назад

I love this guys dedication to the correct order of operations

@jogmas12 3 года назад

These types of brake bleeders work really well. Also Made one for my clutch system, same principle, took all the air out.

@xianreiss 8 лет назад

Why not drill the lid not on the bottle then now debris in the bottle.

@dakotadriggers8838 8 лет назад

so the bit doesnt hit anything when it breaks through the cap

@Sticky_Ricky 8 лет назад

You have to clean the bottle anyway, no need to damage a drill bit by hitting it on the surface beneath the lid.

@markothevrba 7 лет назад

Just put it on a piece of wood...

@TheJBMasterpiece 7 лет назад

+markothevrba I used an upside down cardboard box

@walterbrunswick 7 лет назад

Now you have a hole in the bottom of your cardboard box...

@ff5gus 10 лет назад

That's 1/4 I.S. Diameter hose

@thoang2626 4 года назад

Thanks Chris for showing us so many tips and tricks!

@jj200091 6 лет назад

Love your videos. Your videos saved my bacon on two occasions recently when I got in over my head on a car repair.

@chess1ification 8 лет назад

Chris, u said brake fluid is corrosive so I'm wondering why u didn't wear rubber gloves. Is it not corrosive to your skin also?

@angelskater12 7 лет назад

can i get the plastic tubing at a home depot?

@chrisfix 7 лет назад

That is where I got it!

@DaveOfAllMasterOfNone 7 лет назад

If you have a "Rual King" around they have a wider selection. Prices are about the same as Home Depot. Ace Hardware is a convenient rip off, but as stated,sometimes very convenient.

@NicholasLeader0 5 лет назад

Angel Hernandez just picked up some 3/16 ID ‘clear vinyl’ model EZ-FLO 98562. 20” for $4.58 at Lowe’s.

@MrDani3lantunez Год назад

Thanks Chris I’ve been watching your videos for 4 years now and I started working at a mechanic shop and love my job. I guess you could say I graduated from chrisfix university 😂

@shanetseng6040 8 лет назад

Your videos are extremely helpful. Thank you!

@LLStacheLarry 8 лет назад

Can't you use a hose clamp instead of a zip tie?

@chrisfix 8 лет назад

Yes you could!

@LLStacheLarry 8 лет назад

okay cool. I am really liking your videos really like the detail and video shots great job.

@ArneADK 8 лет назад

i use a lighter and heat up te hose when it's on the nipple

@johnvanderpol9059 6 лет назад

only if you could find a small enough one ,cable ties are a lot cheaper.

@sand0077 7 лет назад

Another informative, useful and practical video, thank you!

@ljfarm2316 10 месяцев назад

Thank you Chris for the DIY Brake Bleeder Tank Tutorial Video. I learned a lot from your DIY videos. All the best

@ephraimcamacho9600 3 года назад

Glad I saw this video because in your other video I didn't see the little air vent you added to the bleeder bottle. Perfect ready to do it myself thanks to you again.

@duane13able 7 лет назад

Haven't tried it yet but It will work nicely !! Thank you !!TWO THUMBS UP !!

@mikecee3103 Год назад

Just watched you change brake caliper and use this really a simple tool to make impressive thanks. Saved me a lot of money for a tool I may use once or twice, times a hard these days.

@optimoprimo132 2 года назад

Perfect tip. I made one exactly like that. Just a few points... 1. You can use a thicker based bottle for more stability if you fill the bottle a 3rd of the way with old brake cleaner you have laying around which won't ever be used, or any fluid that might be the same consistency of brake fluid. It's only to keep somewhat of a vacuum for air bubbles. 2. Smaller bottle or larger bottle you can increase stability by gluing a larger plastic piece to the bottom of your bottle. It can be plastic from any empty container or jug.

@daleeasternbrat816 Год назад

I work on industrial and marine diesel generaors and marine propulsion engines. I work on old school cars for fun. your vids will save me a lot of time explaining how to do this . You're a good teacher. Great series of vids!

@chrisfix Год назад

Thanks Dale! I just started ChrisFish. I think you will like that channel too haha. I love boats and I’m sure you could teach me a thing or two!

@braydenwillenborg4904 11 месяцев назад

It's great that ChrisFix is still replying to comments on a video 8 years after release.

@dujevideka1230 3 года назад

Wow this popped in my recommended section today for some reason, I'll still watch it. Chris you sound much more enthusiastic these days 😁

@SuperSlothgaming 11 месяцев назад

Videos like this are truly invaluable job well done chris

@paulo1149 2 года назад

Thanks, Chris, for all your great videos! Here, I would drill out the top with it off the bottle, then blow it out with compressed air to clean it.

@Funsho97 7 месяцев назад

I just did this and it was super easy. I know it is really for one person but I had my son pushing the brake pedal because I wanted to see air bubbles come out and the fluid change with my own eyes. Thanks for this video.

@TheJayDawg21 5 лет назад

Great video, @ChrisFix! I made your brake bleeder and flushed the brake fluid in 3 cars on a Saturday morning. Took me about an hour to get them all done. And best part I made just a little over $100 net profit. My neighbors love me. Also, I'm more of a Gatorade bottle kind-of-guy. LoL. 😏

@salc1300 6 лет назад

Great idea, worked perfectly. Appreciate you sharing this. Thanks...

@ImaLoneWolfintheWoods 6 лет назад

Long before i seen this video, i made bottles like this, but i never thought of making a vent hole, thanks for that great idea!

@nukedim2276 5 лет назад

Thank you, bro.. your video helps people to get the job done. Thanks again for sharing the know-how..!

@nazarettos6987 6 лет назад

Thank you for your great videos. I used this technique and it worked great.

@brandigish9618 3 года назад

You rock! Straight to the point on your videos and not too much info. Thanks. Subscribed! 🤩

@ericgonzales432 7 лет назад

I just want to say thank you because I made a one-man bleeder and I did my brakes all by myself it really does work think

@PakDesiinUsa 7 лет назад

I just started watching your videos ,Its really very nice ,I have to do brake flush and front brake rotors and pads needs to be replace in my Toyota Avalon XLS, Mechanics estimate just labor is $300,Parts mine,From now on I will do this by myself ...Thank you Chris,You are awesome...........