Тёмный

How to Make a Slab Drape Mold Ceramic Bowl 

DR Wilde Fire Art
Подписаться 784
Просмотров 33 тыс.
50% 1

Mr. Wilde, Ceramics Teacher at Mountain Ridge High School in Utah, demonstrates how to construct a Ceramic Bowl using a Slab Drape Mold construction.
First, I'm going to demonstrate how to slab out a fairly large piece of clay using my hands to pat the clay, using the lift and throw (gently) technique, and finally using a rolling pin and clay thickness strips.
Once my clay is slabbed out in an oval-like shape, I'm going to texture the surface using the impressing technique. Specifically, I'm going to use a couple of my embroidered shirts where the stitching rises above the surface of the shirt, but really, I can use any object that would leave a mark if I pressed it into the clay.
Next, I'm going to set a football (any type of solid roundish object will work) inside of a bowl. The bowl should be smaller than the ball, and is just used to keep the ball from rolling away.
Then, I'm going to lift up the slab and DRAPE it over the football, hence the term DRAPE MOLD. After inserting a few cups under the edges of the clay slab, I'm going to let the slab sit for several hours in order to harden to a leather-hard state.
I'll make a circular coil foot that will act as a base for the Drape Mold, attach it, carefully flip the mold over, and add a few finishing touches.
The result will be a clam-shell shaped bowl.
LEARN HOW TO MAKE CLAY SLABS:
• How to Make Clay Slabs
USE THE SAME EQUIPMENT AND TOOLS I DO:
Economy Tool Kit (Needle Tool, Wire Clay Cutter, Sponge, Loop Tool, Ribbon Tool, Wooden Knife, Metal Rib, Wooden Rib), item# 30353-1089
www.anrdoezrs....
Fettling Knife (hard), item# 30349-1020
www.anrdoezrs....
Amaco Plasti-bat, Square 9", item# 30019-1009
www.anrdoezrs....
Amaco Plasti-bat, Round 14", item# 30019-9014
www.anrdoezrs....
Amaco No. 46 Buff Stoneware Clay, item# 30514-0050
www.anrdoezrs....
Blick Aluminum Ruler, 18", item# 56016-1018
www.anrdoezrs....
Solid Maple Slab Roller (Rolling Pin), item# 30323-1024
www.anrdoezrs....
Clay Thickness Strips, item# 30323-1009
www.anrdoezrs....
PLEASE LIKE AND SUBSCRIBE TO MY RU-vid CHANNEL
PLEASE FOLLOW ME ON INSTAGRAM:
/ wildefireart
PLEASE FOLLOW ME ON TWITTER:
/ wildefireart
PLEASE FOLLOW MY FACEBOOK PAGE:
/ wildefireart

Опубликовано:

 

6 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 58   
@DunoonVanRijn-dx1hr
@DunoonVanRijn-dx1hr 10 дней назад
Excellent Thanks for your contribution
@sb-516
@sb-516 6 месяцев назад
Such a good video! Many thanks for your explanations and your slow, steady manner.
@davidwilde4288
@davidwilde4288 3 месяца назад
You're welcome.
@luciahundelshausen612
@luciahundelshausen612 2 года назад
¡ felicitaciones! Quedó precioso mil gracias por compartir tus maravillosos contenidos. Saludos desde Cartagena Colombia
@davidwilde4288
@davidwilde4288 3 месяца назад
Thank you for viewing, and thankyou for the compliment.
@dianemoore5985
@dianemoore5985 2 года назад
I appreciate how you achieved decoration on both sides of the bowl.
@davidwilde4288
@davidwilde4288 3 месяца назад
Thank you. Sometimes it hard to preserve the pressed design on the first side, because sometimes flipping it over and pressing the other side, you lose the design from the pressing of the first side.
@sofiaceleste6299
@sofiaceleste6299 Год назад
Dios mio me parece un sueño, es precisamente lo que tengo en mi cabeza desde hacen meses y no sabia como hacerlo, ahora estoy más clara , es un milagro , gracias por compartir el arte, saludos 🤗
@davidwilde4288
@davidwilde4288 3 месяца назад
You're welcome. I'm glad I was able to demonstrate it in a way that helps you.
@elencecconello7347
@elencecconello7347 3 года назад
Excellent. Gracias 😊
@drwildefireart8923
@drwildefireart8923 3 года назад
Thank you!
@kg2937
@kg2937 Год назад
Amazing and so creative!
@davidwilde4288
@davidwilde4288 3 месяца назад
Thank you!
@walterjoemoore6732
@walterjoemoore6732 3 года назад
Well demonstrated. Thanks
@drwildefireart8923
@drwildefireart8923 3 года назад
You're welcome! Thanks for watching.
@JulieHiltbrunner
@JulieHiltbrunner 3 года назад
Very nice!
@drwildefireart8923
@drwildefireart8923 3 года назад
Thank you!
@lindaflanagan9552
@lindaflanagan9552 5 месяцев назад
Do you ever have problems with these pieces sagging in the kiln? Do you fire them without any supports? Thanks!
@davidwilde4288
@davidwilde4288 3 месяца назад
I've never had a problem with the bisque fire (to cone 05), and rarely have a problem with the glaze fire (to cone 5). A couple of my students, whose projects were longer and flatter did have some drooping/sagging on the ends. I think as long as the sides go upwards somewhat, even at an angle, drooping shouldn't be an issue. If you're firing higher than cone 5, you may run into more issues as the temperature increases. I haven't used supports with this particular project.
@cpetati1
@cpetati1 3 года назад
Wonderful!
@drwildefireart8923
@drwildefireart8923 3 года назад
Thank you!
@junebuxton1750
@junebuxton1750 Год назад
Many thanks
@davidwilde4288
@davidwilde4288 3 месяца назад
You're welcome. Thank you for watching.
@60seconds529
@60seconds529 2 года назад
lovely
@davidwilde4288
@davidwilde4288 3 месяца назад
Thank you.
@mirnadls6007
@mirnadls6007 Год назад
Amazing, question please how tick is the s an to make this bowl.. thanks so much , I hope you answer please🌷
@davidwilde4288
@davidwilde4288 3 месяца назад
The clay was either 1/4 of an inch thick so that I could still impress the clay without it getting too thin.
@tinawilliams9525
@tinawilliams9525 3 года назад
Does this droop any when it is being fired? Is there a best practice for putting it into the kiln?
@drwildefireart8923
@drwildefireart8923 3 года назад
I haven't had an issue with the ones I've personally created, but a couple of my students, whose projects were longer and flatter did have some drooping on the ends. I think as long as the sides go upwards somewhat, even at an angle, drooping shouldn't be an issue.
@svenlundergard1
@svenlundergard1 Год назад
Where do you get those embroidered shirts? I like the patterns they make
@davidwilde4288
@davidwilde4288 3 месяца назад
Those particular shirts are embroidered Affliction shirts purchased from the Buckle. I agree, they made a really nice pattern.
@y00nhalme
@y00nhalme 3 года назад
고맙습니다.
@davidwilde4288
@davidwilde4288 3 месяца назад
You're welcome.
@braxtonpeterson95
@braxtonpeterson95 3 года назад
Braxton P. 6
@drwildefireart8923
@drwildefireart8923 3 года назад
Thanks.
@calinazibrick3381
@calinazibrick3381 3 года назад
Calina Z. 6.
@drwildefireart8923
@drwildefireart8923 3 года назад
Thank you.
@ashlynnehansen3510
@ashlynnehansen3510 3 года назад
Ashlynne H 6
@drwildefireart8923
@drwildefireart8923 3 года назад
Thanks.
@tylerwillis4792
@tylerwillis4792 3 года назад
Tyler W 6
@drwildefireart8923
@drwildefireart8923 3 года назад
Thanks.
@kimberlyviana3867
@kimberlyviana3867 3 года назад
Kimberly V. 6
@drwildefireart8923
@drwildefireart8923 3 года назад
Thanks.
@ellieorton7990
@ellieorton7990 3 года назад
Ellie O. 6
@drwildefireart8923
@drwildefireart8923 3 года назад
Thanks.
@firerat77
@firerat77 3 года назад
Jace R. 6
@drwildefireart8923
@drwildefireart8923 3 года назад
Thanks.
@jonathandodds5138
@jonathandodds5138 3 года назад
Jon D. 6
@drwildefireart8923
@drwildefireart8923 3 года назад
Thanks.
@thepochade5992
@thepochade5992 2 года назад
You would have been better off rolling that slab directly on the stone bench top.
@davidwilde4288
@davidwilde4288 3 месяца назад
For my first attempt, it actually stuck to the countertop, so I used the cardboard so it would peel away more easily.
@oliviavogrinec8982
@oliviavogrinec8982 3 года назад
Olivia V 1
@drwildefireart8923
@drwildefireart8923 3 года назад
Thanks.
@gage4448
@gage4448 3 года назад
Gage G 1st
@drwildefireart8923
@drwildefireart8923 3 года назад
Thanks.
@witchplease77
@witchplease77 2 года назад
Did you ever glaze it?
Далее
How to make clay hump molds from found forms..
24:15
Просмотров 82 тыс.
How to Make a Large Slab Drape Mold Ceramic Bowl
9:50
Cristiano Ronaldo Surpassed Me! #shorts
00:17
Просмотров 14 млн
Cute kitty gadget 💛💕
00:23
Просмотров 9 млн
OG Buda - Сабака (A.D.H.D)
02:19
Просмотров 77 тыс.
How to Make a Decorative Coil Mug with Handle
31:17
Просмотров 2,1 тыс.
How to Make a Bowl Using the Pinch Technique
4:27
Просмотров 1,7 тыс.
How to Make a Dorodango (Japanese Polished Clay Ball)
9:17
Slab bowl using a slump mold
11:26
Просмотров 67 тыс.
A Permanent Magnet That Turns On and Off
9:55
Просмотров 2,2 млн
Cristiano Ronaldo Surpassed Me! #shorts
00:17
Просмотров 14 млн