Тёмный

How To Make A Springtrap Cosplay Head from Five Nights at Freddy's 3! 

AyeJayDee
Подписаться 293 тыс.
Просмотров 202 тыс.
50% 1

Welcome to the full tutorial on how to make a Springtrap cosplay head from Five Night's at Freddy's! I listened to my amazing subscribers, and tried to make the perfect tutorial for y'all to follow and make the best Springtrap head you can!
I also constantly get asked this question: "how do you see through your masks?" I had to make an entire video on it, but still get asked the question. Basically, the eyes you see in the video are what I call "'show eyes". They have Velcro on the bottom so I can take them out and replace them with see through eyes. To make see through eyes, use mesh instead of white paint. I just use those eyes as display or show eyes to make the costume look more realistic. Hope this helps
List of materials:
Remember to check places like thrift stores, small businesses, or garage sales for any of these materials so you can save more money and help out small businesses
Project foam: www.joann.com/...
Fabric: Olive Green Anti-Pill Fleece. Make sure it's stretchy. Available at Walmart, Joann's, or a fabric store near you
Brad Pins:
Plastic Ornaments for Eyes/Eyelids: Sizes vary based on head size. Available on Amazon, or at your local store come holiday season.
Plastic Mesh Canvas for Jaw Structure: www.michaels.c...
Metal wires: www.michaels.c...
Colored Wire (You may be able to use stuff around your house, but here's a cheap alternative):
Black Rubber Tubes for Ears (Sizes may vary based on head size): www.lowes.com/...
Oven Bake Clay for Teeth:
Fake Skin (although fairly cheap, I recommend using peach colored felt that you can paint on, just based upon availability):
- Fake Skin: www.amazon.com...
- Peach Colored Felt: www.michaels.c...
#cosplay #diy #fivenightsatfreddys #fnaf #costume #gaming #youtube #craft #tutorial #howto

Опубликовано:

 

6 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 936   
@cynthiagorkowski9089
@cynthiagorkowski9089 10 месяцев назад
I just finished making a Springtrap costume for my Grandson. I am a 77 year old Grandmother and your RU-vid videos were so helpful.
@AyeJayDeeDIY
@AyeJayDeeDIY 10 месяцев назад
That's great to hear! I'm glad I can help 😁
@scrippted
@scrippted 10 месяцев назад
W
@TwinkleWorldOrder
@TwinkleWorldOrder 10 месяцев назад
Your grandson is so lucky
@Pipplin
@Pipplin 10 месяцев назад
You’re an awesome grandma!
@baimo_ofc
@baimo_ofc 10 месяцев назад
AHAHAHA YOU'RE THE BEST
@vaderinatuxedo4428
@vaderinatuxedo4428 Год назад
I made my springtrap helmet gold and just made it as dirty looking as possible because it just makes sense to me
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Nice! Whatever works for you is perfect 😁
@AncientLordProductions
@AncientLordProductions 11 месяцев назад
i’d love to see it! if nots that’s fine
@erikarsov4365
@erikarsov4365 11 месяцев назад
Bling trap
@shortychris2000
@shortychris2000 10 месяцев назад
@@erikarsov4365lol
@TZBonnielol
@TZBonnielol 10 месяцев назад
​@@erikarsov4365BEING CHELLIN
@wordedpuppet6278
@wordedpuppet6278 10 месяцев назад
After seeing the FNaF movie, I’ve finally decided I want to make a suit of the yellow rabbit. This tutorial is absolutely perfect for me, as it’s very close to what I’m wanting. Here’s hoping mine turns out looking alright! Would love to hand out candy with it next Halloween!
@AyeJayDeeDIY
@AyeJayDeeDIY 10 месяцев назад
That's awesome!!! I hope it helps 😁
@ten_stepa
@ten_stepa 10 месяцев назад
Same for me! Good luck!
@monsterzeroarts7468
@monsterzeroarts7468 9 месяцев назад
Just for info the pre-springlocked form is called spring Bonnie
@wordedpuppet6278
@wordedpuppet6278 9 месяцев назад
@@monsterzeroarts7468 The yellow rabbit is a unique design as it’s partially withered, making it a mix of spring Bonnie and springtrap. That’s why I refer to it by its movie name.
@Ivy_the_fox_therian
@Ivy_the_fox_therian 10 месяцев назад
ive been a FNAF fan since i was 3 years old and im now 11... yes ''too young'' not really i enjoyed it. but the best thing is that ive never made anything about FNAF... my parents are still upset about me liking fnaf and watching the movie so having an entire suit of the guy who killed innocent children and died in this suit is going to be the final straw for them but i really dont care and im going to waste their money on something that i need but dont need at the same time. thank you so much for showing me this creation this MASTERPIECE now it is currently 4am and i am gonna see and list everything i need to spend money on. thank you i am thankful for this tutorial!
@AyeJayDeeDIY
@AyeJayDeeDIY 10 месяцев назад
Glad I can help 😁
@michalbeeble4569
@michalbeeble4569 Год назад
I'm working on a springtrap costume for halloween and this tutorial will help so much. Your mask looks great!
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
That's awesome! You'll have to show me when you're done! And thank you so much! 😁🙏
@michalbeeble4569
@michalbeeble4569 Год назад
@@AyeJayDeeDIY Thanks! One problem though, when I make it how will I see out of it? Can you see out of yours? And what foam do you use? Sorry for all the questions
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
@@michalbeeble4569 I love that you're asking questions! And if you check out my channel, I actually posted a video that answers all of those questions! Here's the link to the video 😁 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-j-DAZZ-93aA.html
@evabadalamenti3189
@evabadalamenti3189 8 месяцев назад
Wow ! I actually saw the FNAF movie last month and discovered the huge story behind the games etc. And now I can't stop watching fnaf related content and I really want to build a springtrap suit. As far I don't know anything about cosplay, your video and the clear explainations just filled me with so much hope and excitement ! I can't wait to try to do it ! Thank you !
@jakeandjohnniesupporter
@jakeandjohnniesupporter 8 месяцев назад
I wish you had a company and did orders because damn i really need a springtrap costume
@TobycraftHD1
@TobycraftHD1 9 месяцев назад
So my school does this day where you can come in as ANYTHING, even costumes... I think I know what I'm going as...
@GroundCTRL2MajorTom
@GroundCTRL2MajorTom Год назад
I’m remaking my spring bonnie in honor of the new FNaF movie, and to terrify my house guests. I was struggling with doing the jaw but your tutorial helped me! My head looks great so far!
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
That's amazing! And I'm really glad to hear that, thank you 😁 And I would love to see your head!
@Undertale-Orange
@Undertale-Orange Год назад
Same to be honest
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
@@Undertale-Orange 😁
@JakubGajda
@JakubGajda Год назад
me too
@Elizabeth_Artist
@Elizabeth_Artist Год назад
​@@AyeJayDeeDIYi been making mask before I found this channel and it has helped a lot! I made them out of cardboard mostly because I had no idea on how to use foam and when I did, it made things better and the mouths were always the hard part, but I agree this made the whole thing a whole lot easier
@monsterzeroarts7468
@monsterzeroarts7468 10 месяцев назад
I’m so happy I found your channel Springtrap is my favourite character and I have been trying to figure out how to make a costume forever but I thought I needed a super expensive 3d-printer Thank you for helping me realise this is something I can do without having thousands of pounds
@AyeJayDeeDIY
@AyeJayDeeDIY 10 месяцев назад
Glad I can help 😁🙏
@monsterzeroarts7468
@monsterzeroarts7468 10 месяцев назад
@@AyeJayDeeDIY time to speed make this before fnaf movie leaves the cinema!
@Kitty_noodles
@Kitty_noodles 10 месяцев назад
I’m gonna impress my friends on Halloween bc they said they didn’t wanna match with me :(
@Anime-gg3oo
@Anime-gg3oo 3 месяца назад
I couldn’t find any peach colored felt, but I used peach colored foam, the rectangle ones that are $1. I ended up using black and red paint, blending the colors a little bit to make a burnt skin effect.
@Random_Guy444
@Random_Guy444 Год назад
Wow! That's impressive! This will be a very useful tutorial for me!
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Thank you!! Glad it can help 😁
@klutzerni9061
@klutzerni9061 7 месяцев назад
Huge thank you for this. I made a Springtrap head for crafting class in my university and it turned out very good, my professors and other students loved it :D i plan on continuing the costume and making the body too, so that I can have a full cosplay for a con that's gonna happen in May :)
@AyeJayDeeDIY
@AyeJayDeeDIY 7 месяцев назад
I'm so happy to hear that! So glad I could help you out! Best of luck on the rest of the costume
@footyballz525
@footyballz525 Год назад
Can you give away a Freddy or springtrap mask? I’ve been trying to make mine but they all keep breaking or don’t come out good (thx for the heart even though you got rid of it❤) also keep up the good work your amazing
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
I would love to! I'll be giving a mask away to one of my subscribers once I pass 1,000 subs. So stay tuned cause you could be the winner 🫢 Also if you'd like to, you can share my channel so that way it's closer to my goal 😁
@footyballz525
@footyballz525 Год назад
@@AyeJayDeeDIYok I will ❤
@footyballz525
@footyballz525 Год назад
@@AyeJayDeeDIYare the jaws moveable?
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
@@footyballz525 awesome! Thank you! And thanks for the support! (Also I didn't mean to get rid of the heart, it was an accident haha.) I make sure all my amazing subs get a heart!
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
@@footyballz525 yep!
@kracyndalabombarbe2342
@kracyndalabombarbe2342 4 месяца назад
This is awesome! My nephew wants to be springtrap for halloween this year, and since i make his costumes, this will be very helpful in making it!
@AyeJayDeeDIY
@AyeJayDeeDIY 4 месяца назад
Glad I can help! I also have the full body tutorial on my channel that may help 😁
@SuperMarioWowza67
@SuperMarioWowza67 Год назад
I’ve only made the rough version of the ears today, but they’re pretty good for being rough. Thanks for the tutorials bro. :)
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
That's awesome! And of course! Good luck on it, and I'd love to see what it looks like when you're done!
@SuperMarioWowza67
@SuperMarioWowza67 Год назад
@@AyeJayDeeDIY I’ll update you on progress, thanks
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
@@SuperMarioWowza67 awesome!
@bluefoxman
@bluefoxman 2 месяца назад
I tryed battingtons tutorial and wow it was hard. This is much easier so thank you so much!
@justaspoon1912
@justaspoon1912 9 месяцев назад
Instructions unclear, I’ve been spring locked
@rubykaylaandogie3334
@rubykaylaandogie3334 5 месяцев назад
Springtrap cosplay: the authentic experience
@daniasyed
@daniasyed 8 месяцев назад
comic con coming in a month or so lets see if i can atleast get the head made wooo! wish me luck
@Therandomperson_0
@Therandomperson_0 Год назад
This is my favorite springtrap mask I seen I swear love it man👍
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Thank you! 🙏 This means a lot!
@Therandomperson_0
@Therandomperson_0 Год назад
@@AyeJayDeeDIY anytime man!
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
😁
@ZaynsUniverse_YT
@ZaynsUniverse_YT Год назад
HOW DO YOU NOT HAVE AT LEAST 100K SUBS BRO THIS IS AMAZING
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Thank you!! And that would be a dream! 😁🙏
@mythical5434
@mythical5434 Год назад
Man I wish I have the materials required to make this head. Anyways, nice tutorial!
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Thank you!!
@jax.x1515
@jax.x1515 10 месяцев назад
awesome tut! I fr just impulsively ordered everything to make it, and will hopefully have some updates soon!
@AyeJayDeeDIY
@AyeJayDeeDIY 10 месяцев назад
Thanks! And awesome!
@CaptainSnicks
@CaptainSnicks Год назад
Epic springtrap dude! Im trying to make a springtrap suit so i can wear while watching the movie lol, this helps a lot, thanks!
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Thank you so much! And that's awesome! You'll have to show me your finished product!
@CaptainSnicks
@CaptainSnicks Год назад
@@AyeJayDeeDIY i certainly will :)
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
@@CaptainSnicks 😁
@stellatiko5727
@stellatiko5727 10 месяцев назад
you are so creative you know your the most creative person i know anyone i know who is creative DOES NOT come close to you ❤‍🔥❤‍🔥❤‍🔥❤‍🔥🔥
@AyeJayDeeDIY
@AyeJayDeeDIY 10 месяцев назад
Thank you so much 🙏🙏
@tramnguyen-ep4ey
@tramnguyen-ep4ey Год назад
Thank you so much for this tutorial! I stumbled onto your channel on accident, and im glad i did.This is also the only yt vid that has actually helped me in making my cosplay. You provide useful information + tips
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Thank you so much! And I'm glad you stumbled your way here!! 😁
@justaperson145
@justaperson145 Год назад
the springtrap head is so fire even though it's on a budget good job!
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Thank you!!
@spencerwhite8891
@spencerwhite8891 Год назад
Your springtrap looks Absolutely amazing!!! Well done! 😊
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Thank you so much! 🙏
@mxtixia
@mxtixia Год назад
Omg I needed this so much I already have his full body but I couldn’t find a way to make his head and I’m making this so I can wear it to the theater when the new movie comes out man it’s gonna be great!!
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
That's awesome! Glad I can help 😁
@quinnhollis8766
@quinnhollis8766 Год назад
This is amazing!! I can’t wait to try and make it. (Really want a cool Halloween costume this year lol)
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Thank you!! I hope it helps you out!
@doubleabees6332
@doubleabees6332 Год назад
What were the dimensions of the foam you used to do the triangles and such? I’m asking because once I measured my head, there’s a bunch of extra foam going up
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Measure how long the foam sheet is. Divide that number by a high number like 7-10. Say the foam sheet is 32 inches long, divide it by 8 so you get 4. 8 is the number of triangles, and 4 is how many inches the bottom of the triangle is. I usually make the height about 3.5 inches tall. Mark a line at the midway point of the 4 inch base on the triangle (2 inches) and draw a line straight up 3.5 inches. Then just use a straight edge/ruler to connect it from the top middle to the bottom sides. Hope this helps 😁
@aviously1158
@aviously1158 11 месяцев назад
This was so beyond helpful. Thank you!
@AyeJayDeeDIY
@AyeJayDeeDIY 11 месяцев назад
Glad I can help 😁
@Tinuhh23
@Tinuhh23 Год назад
Thnak you so much for this! My son wants to be this for Halloween and I been overwhelmed these past months looking up ways to make the head. I would come and look it up on here every few weeks. I almost about gave up until today. Thank you so much again for this! ❤
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
I'm really glad I can help! You're son is going to love it 😁
@soscemo69
@soscemo69 11 месяцев назад
How mutch time did it take?
@AyeJayDeeDIY
@AyeJayDeeDIY 11 месяцев назад
@@soscemo69 about 20 hours total in the span of a few days
@soscemo69
@soscemo69 11 месяцев назад
@@AyeJayDeeDIYThanks for the answer, i want to build this for the FNaF movie. This is the first cosplay i will do for a long time. I got the materials, now the problem is assemnling it, but i know that it's going to be very fun.
@AyeJayDeeDIY
@AyeJayDeeDIY 11 месяцев назад
@@soscemo69 Hopefully the tutorials will help!
@AaronInVR
@AaronInVR Год назад
When wrapping the head with a second layer of foam, do you have to do the triangles again? I’m starting my springtrap head today and just wanna make sure ^^
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
You could either do the triangles, or cut a piece of foam into a circle, mold it on top of the dome on the base layer, and trim the edges
@AaronInVR
@AaronInVR Год назад
@@AyeJayDeeDIY thanks so much! Absolutely looking forward to making this springtrap head. It’s gonna be my first time making a costume! 😅
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
@@AaronInVR awesome!
@yana_s_100
@yana_s_100 Год назад
BRO THIS WAS AMAZING 😭😭 IVE BEEN LOOKING FOR A CHEEP BUT GOOD TUT AND URS WAS PERFECT OMLLLL
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Thank you so much!! Glad it can help 😁
@Walbert50
@Walbert50 Год назад
This is awesome! I do have a question though, do you have to wrap it in a second layer of PolyFoam or can you just use one roll? Thanks!
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
You can do one! I prefer to do 2 because it makes it bigger and more durable 😁
@Mintinus
@Mintinus Год назад
@@AyeJayDeeDIY Thanks! This was my alt account.
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
@@Mintinus 😁
@Oguneditz
@Oguneditz Год назад
thanks finally ı can make my self a mask
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Awesome!! It's gonna turn out great!
@AlbinoGuesty
@AlbinoGuesty Год назад
Is it possible if you can make suits with the mask as well? It would be awesome!
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Definitely someday in the future! It'll take a lot of time and money, but hopefully with the growth of this channel, I can make it happen 😁
@Hectortheman
@Hectortheman 11 месяцев назад
I am going to make a springbonnie mask for fnaf movie and halloween so this helped alot thqnk you❤️
@AyeJayDeeDIY
@AyeJayDeeDIY 11 месяцев назад
Awesome! Glad I can help 😁
@bitterferret
@bitterferret Год назад
Your content never fails to be entertaining and impressive!
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Thank you so much! This means a lot 😁🙏
@bitterferret
@bitterferret Год назад
@@AyeJayDeeDIY No problem! Also do you think you’ll be making a video on the freddy body? I meant to ask a while ago but totally forgot
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
@@bitterferret yep I'll be making a full body tutorial! I just gotta acquire some materials. I'll hopefully be done with it by early August 😁
@bitterferret
@bitterferret Год назад
@@AyeJayDeeDIY awesome thanks and good luck making it!
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
@@bitterferret thank you! 😁
@redzofia
@redzofia 9 месяцев назад
I’m gonna make a withered golden Freddy costume, with now knowing the basics, this REALLY helps
@AyeJayDeeDIY
@AyeJayDeeDIY 9 месяцев назад
Awesome!
@JuElcock
@JuElcock 11 месяцев назад
Hey! Looks amazing! What are the measurements for the triangles on the foam at the start? 🙏🏻
@AyeJayDeeDIY
@AyeJayDeeDIY 11 месяцев назад
Measure how long the foam sheet is. Divide that number by a high number like 7-10. Say the foam sheet is 32 inches long, divide it by 8 so you get 4. 8 is the number of triangles, and 4 is how many inches the bottom of the triangle is. I usually make the height about 3.5 inches tall. Mark a line at the midway point of the 4 inch base on the triangle (2 inches) and draw a line straight up 3.5 inches. Then just use a straight edge/ruler to connect it from the top middle to the bottom sides. Hope this helps 😁
@pagmoos
@pagmoos 10 месяцев назад
@@AyeJayDeeDIY would the 32 inches you used in your example be the circumference of your head that you measure out at the beginning?
@JuElcock
@JuElcock 9 месяцев назад
@@AyeJayDeeDIYthankyou 🙏🏻🙂
@user-pn2xj6pj9q
@user-pn2xj6pj9q 8 месяцев назад
i just finished making my springtrap costume out of cardboard but now im on my chrome book riting the things i need for my new springtrap costume out of foam your video is helping so much and im so happie that you made this video
@jevilstail
@jevilstail 8 месяцев назад
I can't believe I'm about to do this. I'm not a crafty person, I only paint and draw. After being a fan for 9 years I finally snapped
@callie2917
@callie2917 10 месяцев назад
Thanks for inspiring me 😁😁😁
@AyeJayDeeDIY
@AyeJayDeeDIY 10 месяцев назад
Glad I can inspire you 😁
@loki_dripdrop
@loki_dripdrop 9 месяцев назад
Bro I’m going to watch all of them because I’m planing on making my own Fnaf movie with my friends
@UltimateFighterEggman
@UltimateFighterEggman 8 месяцев назад
Just won my costume contest too, THANKS!
@AyeJayDeeDIY
@AyeJayDeeDIY 8 месяцев назад
Congratulations!
@urmom_iii
@urmom_iii Год назад
Remember me when you get famous 💯
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Of course! Thank you for the support 😊🙏
@Sharp22CatFish
@Sharp22CatFish 8 месяцев назад
I have seriously no idea why I sit down and watch these videos even though I don't even make any of them
@Crap_animations
@Crap_animations 4 месяца назад
The tuto is perfect and so helpful thanks you so much❤
@AyeJayDeeDIY
@AyeJayDeeDIY 4 месяца назад
Glad I can help!
@Crap_animations
@Crap_animations 4 месяца назад
5:28 how many do we need? (Im mot sure)
@Just_latte99
@Just_latte99 27 дней назад
I’m being springtrap for Halloween so this is helping me my lil sis wants me to me to maker her a Bonnie mask so
@LemondeL
@LemondeL 9 месяцев назад
Mines pretty good for first time😊
@LemondeL
@LemondeL 9 месяцев назад
all u should try
@TheThirdSparrow
@TheThirdSparrow Год назад
You're So Talented
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Thank you so much!
@henrytoledo8509
@henrytoledo8509 9 месяцев назад
OOOOOOOOOOOHHHHH WHAAAT THEEE HEEELLLLLL Look at the curvature of his back in the beginning, he be bending 150° golly
@AyeJayDeeDIY
@AyeJayDeeDIY 9 месяцев назад
😭😭
@ambergilbert1960
@ambergilbert1960 9 месяцев назад
this is going to help me with spring bonnie thank you
@AyeJayDeeDIY
@AyeJayDeeDIY 9 месяцев назад
Glad I can help 😁
@sabrinaneely2961
@sabrinaneely2961 10 месяцев назад
I want to make the mask and put it on a pumpkin for my college's pumpkin decorating contest
@AyeJayDeeDIY
@AyeJayDeeDIY 10 месяцев назад
Nice!
@i-be-chillen
@i-be-chillen 8 месяцев назад
this is better then the fnaf suits in the movie
@AyeJayDeeDIY
@AyeJayDeeDIY 8 месяцев назад
🙏
@Tails_and_Luigi101
@Tails_and_Luigi101 9 месяцев назад
My brother wants to have a Springtrap cosplay and it’s turning out great thanks to your tutorial!
@AyeJayDeeDIY
@AyeJayDeeDIY 9 месяцев назад
Glad I can help 😁
@hi_dom
@hi_dom 10 месяцев назад
not sure when i'll be able to but i'm definitely gonna use your tutorials as a reference for a cosplay of movie springtrap
@AyeJayDeeDIY
@AyeJayDeeDIY 10 месяцев назад
Awesome!
@Mello673
@Mello673 2 месяца назад
I'm gonna make it NOW!!
@Servp_
@Servp_ 2 месяца назад
I am planing on making 3D printed for the entire out fit
@AyeJayDeeDIY
@AyeJayDeeDIY 2 месяца назад
Cool 👍
@susdroid8169
@susdroid8169 Год назад
Dude, this is just amazing
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Thank you!
@Choso-Itadori-jjk
@Choso-Itadori-jjk 8 месяцев назад
Thanks! i will buy the stuff and make it!
@Cats771
@Cats771 10 месяцев назад
Ima try and make this mask to bring to the Fnaf movie I hope I’m able to make it in time
@AyeJayDeeDIY
@AyeJayDeeDIY 10 месяцев назад
Nice!
@sadekfatima3122
@sadekfatima3122 Год назад
You shoud be hired for the fnaf movie 2!
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
That'd be a dream!
@explosion-n8l
@explosion-n8l 10 месяцев назад
now make springtrap cosplay tutorial but only with duct tape,scissors and hot glue
@Jevo-12
@Jevo-12 11 месяцев назад
super cool imma try and make this
@AyeJayDeeDIY
@AyeJayDeeDIY 11 месяцев назад
Awesome!
@carpetthemoonele1312
@carpetthemoonele1312 9 месяцев назад
Im doing something similar with cardboard and this helped a lot!
@AyeJayDeeDIY
@AyeJayDeeDIY 9 месяцев назад
😁
@enderkill5558
@enderkill5558 10 месяцев назад
the video helped me soo much thanks to you ,and , I ALWAYS COME BACK.
@AyeJayDeeDIY
@AyeJayDeeDIY 10 месяцев назад
Glad I can help 😁
@joannakownacka4966
@joannakownacka4966 10 месяцев назад
I'd like to thank you for inspiration and help. I made mine based on yours and my son loves it
@AyeJayDeeDIY
@AyeJayDeeDIY 10 месяцев назад
I'm happy to hear that!
@Clarie_fpe_help_me
@Clarie_fpe_help_me 6 месяцев назад
Thx for the tutorial i just made foxy and now im doing witherd bonnie
@AyeJayDeeDIY
@AyeJayDeeDIY 6 месяцев назад
Glad I can help 😁
@kuru-cosplay7279
@kuru-cosplay7279 10 месяцев назад
Im making a golden freddy suit from the movie and this is rly helpful!
@AyeJayDeeDIY
@AyeJayDeeDIY 10 месяцев назад
Awesome!
@kuru-cosplay7279
@kuru-cosplay7279 10 месяцев назад
@@AyeJayDeeDIY and i will maybe even do a springtrap suit thanks to your awesome Tutorial! Always glad to have such ppl like you who help others out! Im subscribing to your Channel!
@AyeJayDeeDIY
@AyeJayDeeDIY 10 месяцев назад
🙏🙏
@kuru-cosplay7279
@kuru-cosplay7279 10 месяцев назад
@@AyeJayDeeDIY the base ,should i Use high or low density foam? 😁
@RelexIDK
@RelexIDK 8 месяцев назад
BRO ME AND MY DAD R STRESSED MAKING THE HEAD SHAPE. I have five questions 1. What are the dimensions for the triangles because when we try it some are too big or too small to perfectly cover the entire roof of your head 2. How many triangles should there be to fit the roof perfectly 3. How do you draw springtrap’s face so perfectly like how big is his eyes or how close is his nose to his eyes 4. Is the head and bottom jaw separate because our head looks too skinny and tall for it to be Springtrap’s whole head. So should we cut off the bottom half? 5. How do you make the nose to stick out
@AyeJayDeeDIY
@AyeJayDeeDIY 8 месяцев назад
Measure how long the foam sheet is. Divide that number by a high number like 7-10. Say the foam sheet is 32 inches long, divide it by 8 so you get 4. 8 is the number of triangles, and 4 is how many inches the bottom of the triangle is. I usually make the height about 3.5 inches tall. Mark a line at the midway point of the 4 inch base on the triangle (2 inches) and draw a line straight up 3.5 inches. Then just use a straight edge/ruler to connect it from the top middle to the bottom sides. All you do is use a marker and draw his face 🤷 There isn't anything special to that. I free handed it. The eyes are the size of the diameter of the ornaments. Draw the eyes first based on where your eyes are. For the last questions: Yes... As shown in the video I make a top half of the head and make the jaw separate. I show how I connected them by using a hinge mechanism with brad pins. Make sure to watch the whole video because it's shown there. Do you mean the nose or the muzzle? I show how I made the nose in the video. But if you are referring to the muzzle, just hot glue a couple pieces of foam together, sketch out the shape, and trim the excess foam off
@bungler433
@bungler433 11 месяцев назад
this gave me a wacky idea make fursuits but they have springlock contraptions inside it and you dont tell the customers
@risefingerboard515
@risefingerboard515 7 месяцев назад
1) its going great, this is the best springtrap head tutorial ever! (Other tha the one daregularsauce made, but im not rich) 2) do you use elastic for the jaw?
@AyeJayDeeDIY
@AyeJayDeeDIY 7 месяцев назад
I know his is better, thanks for pointing that out 👍 But my goal is to show how to make them while on a budget and as cheap as possible. Because I myself aren't rich either. And yeah add elastic
@Yourlocalpenguinenthusiast
@Yourlocalpenguinenthusiast Год назад
Wow, you are very talented
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Thank you!
@mason_tm
@mason_tm 10 месяцев назад
We followed your videos and made Springtrap for Halloween, got lots of compliments, thank you! (not as good as yours but not bad for a first attempt)
@AyeJayDeeDIY
@AyeJayDeeDIY 10 месяцев назад
That's amazing! I'm really glad the tutorials helped 🙏
@mason_tm
@mason_tm 10 месяцев назад
@@AyeJayDeeDIY ru-vid.comuLT1n7rfMoc
@AyeJayDeeDIY
@AyeJayDeeDIY 10 месяцев назад
​@@mason_tmI love it!
@jessicahannink6498
@jessicahannink6498 4 месяца назад
What do you look through? The mouth? How is it sitting comfortable on your head? Like how is it stable?
@AyeJayDeeDIY
@AyeJayDeeDIY 4 месяца назад
It's pretty comfortable wearing it, luckily it's made with foam so it's soft and spongy. It's also pretty secure. I made it to the shape of my head so the foam will in a way mood around it. Check the description about how to see from it 😉😁
@oldchannel5
@oldchannel5 11 месяцев назад
THX SO MUCHHHH PERFECT FOR MY FNAF HALLOWEEN COSPLAY
@AyeJayDeeDIY
@AyeJayDeeDIY 11 месяцев назад
Glad I can help 😁
@carlaprince3516
@carlaprince3516 10 месяцев назад
Honestly using this method for withered Bonnie when ever I get in lazy
@PDartmaster2011
@PDartmaster2011 5 месяцев назад
dang I'm an eleven yr old that made a spring trap head with this! thanks!
@AyeJayDeeDIY
@AyeJayDeeDIY 5 месяцев назад
Glad I can help 😁
@distorted_tsukasa
@distorted_tsukasa 10 месяцев назад
Thank you I needed this I can’t wait to start working on mine!
@AyeJayDeeDIY
@AyeJayDeeDIY 10 месяцев назад
Awesome!
@PhantomTeddy69
@PhantomTeddy69 Год назад
Wait how does it go from blocky to smooth 1:02 it seems confusing
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
If you look at the text, it says to cut out the eye holes and scars. Once you do that, it really starts to take shape, and also trim some of the rougher edges to make them smooth
@Game_Hunter-oc2mj
@Game_Hunter-oc2mj 11 месяцев назад
can see when you put it on and btw it looks so dam cool
@AyeJayDeeDIY
@AyeJayDeeDIY 11 месяцев назад
Yes, and thanks 🙏
@Xenix_deltaxxx
@Xenix_deltaxxx Год назад
Hello! Can you please make a funtime freddy cosplay with the Bonnie hand puppet? TYSM! I love all your videos they are really helpful! I hope i win the giveaway but aswell goodluck to all those people who want it aswelll! ❤
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Hi! That is definitely something I will do, and I love the idea! And thank you so much 🙏🙏
@amyay243
@amyay243 9 дней назад
Is so sad that my country doesn't have a place to buy some material like you l really want to make the suit so bad
@JakubGajda
@JakubGajda Год назад
I wasn't doing a springtrap costume but springbonnies but still this tutorial really helpted me, especially with the head, thank you😍🤩😀
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
That's awesome!! Glad it can help 😁
@LeoNokia
@LeoNokia 10 месяцев назад
Hey just wondering can you tell me all the materials i need please also great video
@AyeJayDeeDIY
@AyeJayDeeDIY 10 месяцев назад
Check the description 😁
@MF_Cosmo
@MF_Cosmo 8 месяцев назад
When we do the second layer do we have to do the measurements and triangles again?
@AyeJayDeeDIY
@AyeJayDeeDIY 6 месяцев назад
I just wrap it and hot glue it over the first layer, and then do the triangles on top. You can also add a few layers on top and trim it to a dome shape
@RINKRATZ_VR
@RINKRATZ_VR Год назад
Honestly you make it look so easy I’m only able to do the helmet part rn and some how it’s tight
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
Make sure before you start, you wrap the foam around your head to make sure it isn't too loose and not too tight. It'll take some patience and time 😁
@RINKRATZ_VR
@RINKRATZ_VR Год назад
@@AyeJayDeeDIY I did wrap it the we put the second layer on then it got all tight
@RINKRATZ_VR
@RINKRATZ_VR Год назад
@@AyeJayDeeDIY is it extremely important to have the second layer???
@RINKRATZ_VR
@RINKRATZ_VR Год назад
@@AyeJayDeeDIY pleaaaaase say it’s not
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
@@RINKRATZ_VR not extremely important, just depends on how big you want your head
@nighttwister0629
@nighttwister0629 10 месяцев назад
Wearing one of these in the Philippines would be a nightmare, all the dust and sweat would get on it.
@Konnorthe_megalomaniac
@Konnorthe_megalomaniac 11 месяцев назад
This might be helpful thanks dude!
@Blading_Boys23
@Blading_Boys23 10 месяцев назад
springy boy needs his chompers ''to bite children''💀
@AyeJayDeeDIY
@AyeJayDeeDIY 10 месяцев назад
😭
@cheshirebean2552
@cheshirebean2552 11 месяцев назад
What type of glue did you use in your hot glue gun? I have the same exact foam but I'm having issues with gluing it together as the glue isn't cooling and it just gets absorbed into the foam
@AyeJayDeeDIY
@AyeJayDeeDIY 11 месяцев назад
So when it does that, it means you have the wrong type of hot glue gun. You need a low temp hot glue gun. It also helps to hot glue in sections and pinch for about 30 seconds to ensure it sticks
@cheshirebean2552
@cheshirebean2552 11 месяцев назад
@@AyeJayDeeDIY ohhh thank you so much
@AyeJayDeeDIY
@AyeJayDeeDIY 11 месяцев назад
Of course!
@FNaF_Fan_4yd3n
@FNaF_Fan_4yd3n Год назад
For the eyelids, should they be the same sized ornaments as the ones for the eyes? If not, how much bigger should they be? I’m talking about for all eyes in general, not just springtrap’s
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
I used bigger ornaments for the eyelids. Tbh, I don't know the exact sizes, I just found a bunch at the thrift store. But Springtrap is actually the only head I made that has that type of eyelids. The others I just hot glued a piece of black fabric on the eyeball 😁
@FNaF_Fan_4yd3n
@FNaF_Fan_4yd3n Год назад
@@AyeJayDeeDIYOk, but if I were to make eyelids that are supposed to look like the endoskeleton, what do I use? Not leather like you’re freddy head
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
@@FNaF_Fan_4yd3n I would use a bigger size ornament for the eyelids, and paint them
@FNaF_Fan_4yd3n
@FNaF_Fan_4yd3n Год назад
@@AyeJayDeeDIY Ok gotcha!👌 So are you going to start using ornaments for eyelids now? And thank you for answering my questions. Hope you get to 1000 subs! 👍
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
@@FNaF_Fan_4yd3n I might on some, just depends how I think it'll look and what materials are available 😁 And of course! I'm glad I can chat with ya! And thank you! It's right around the corner!!
@blucheng4958
@blucheng4958 9 месяцев назад
Daymn thats not bad
@BRONZEZENN0X
@BRONZEZENN0X Год назад
I have a queston, How does the moving jaw work? Beautiful work btw!
@AyeJayDeeDIY
@AyeJayDeeDIY Год назад
I have that included in the tutorial 😁 I explained it a little better in my most recent video, the part 4 on Foxy 😁
@BRONZEZENN0X
@BRONZEZENN0X Год назад
@@AyeJayDeeDIY Thanks.
@VideoGameNerd87
@VideoGameNerd87 6 месяцев назад
2:49 you can also use an airbrush. A lighter is much more dangerous
@AyeJayDeeDIY
@AyeJayDeeDIY 6 месяцев назад
Yeah I know. It wasn't for the color, it was for the charred texture and feel to it. I then went over it with black paint. I took all the proper precautions and did it as safely as possible 👍
@ayaankureshi-6969
@ayaankureshi-6969 10 месяцев назад
Okay I’m going to remake the head next month because #1 I’m bored and #2 I have more reference photos I hope it turns out well
@AyeJayDeeDIY
@AyeJayDeeDIY 10 месяцев назад
Nice!
Далее
We made a real SPRINGTRAP Animatronic from FNAF!
25:12
How to Make a Springtrap Costume - ON A BUDGET!
24:19
Просмотров 299 тыс.
ПРОСТИ МЕНЯ, АСХАБ ТАМАЕВ
32:44
CC's Spectacular Springbonnie Cosplay!
15:31
Просмотров 1 млн
Security Breach Alternate Burntrap Ending
15:11
Просмотров 11 млн
Building my Springtrap Cosplay
19:57
Просмотров 732 тыс.
Making of Bonnie head (Five Nights At Freddy's movie)
10:18
FNAF Springtrap Cosplay Tutorial - Part 3: Arms
4:21
[SFM FNaF] Top 5 CORRUPTED vs Fights WITH Healthbars
18:09
Making the Toy Animatronics
8:00
Просмотров 7 млн
ПРОСТИ МЕНЯ, АСХАБ ТАМАЕВ
32:44