I think by now, we all know about the "trying times" and our lives have been inconvenienced more than we had anticipated. I know mine has!
I wanted to build something that was a little bit of a joke, as many people are still having trouble finding Toilet paper. I thought to my self, what is everyone doing with their stockpiled toilet paper?
So I made a Toiler paper Tower, something to hold and organize your Toilet Paper while still.
I built this using some scrap wooden slats from an old bed, starting off by gluing op the boards so that I got the width I needed.
Next after planing the wood, I should have sanded it, but I did that at the end. I measured a roll of my triple-ply plush TP giving me my overall width and depth. I decided to store 4 rolls and then using 1 would be ideal.
I had intended to drill a 1 1/4" hole through one board and partially though the next but in my haste realized that I had the boards facing the wrong direction, so I just went all the way through.
I went with simple glued and nailed mitred joints that were less than simple to nail together, If you happen to have a nail gun then you won't have any issues. I, unfortunately, do not so I struggled.
Since I didn't have any round stock that matched any of my Forstner bits I took the closest scrap closet rod and reduced it on the lathe.
After a coat of Tung oil, it was finished!
I hope you enjoyed the project, and please stay safe!
Share, Like, and Subscribe:
bit.ly/subMaker
Lend a hand!
Buy me a coffee - bit.ly/helpMaker
Amazon Store - bit.ly/shopMaker
Follow:
Instagram - / heyimamaker
Facebook - / heyimamaker
Twitter - / heyimamaker
Website - imamaker.ca/
Tools Used:
Table Saw
Clamps
Wood Glue
Thickness Planer
Pencil
Square
Sander
Tung Oil
#maker #woodworking #diy #reclaimed #recycled
15 окт 2024