How to make body sprays | 5 ingredients | Easy DIY 

I found this info on Humblebee & Me: Polysorbate 80 is really useful for solubilizing small amounts of oils into otherwise mostly watery things, like toners or body mists. I’ll also use it in 100% oil based products (like cleansing balms or oils) or products that need very low water levels (like bath bombs). In a cleansing balm or oil it functions as a cleansing/rinse-off-boosting ingredient because one end of the molecule loves oil while the other end loves water; the oil loving end grabs oil soluble things from the skin and the water soluble end grabs into the water you’re washing with for easier wash off. Polysorbate 80 tends to be sticky in leave-on products, so be sure to experiment with your formula to see if the amount you’re using works with the skin feel you want. I tend to prefer to use polysorbate 80 in wash-off products for this reason. Polysorbate 20 is used to solubilize small amounts of essential or fragrance oils into otherwise mostly watery things, like toners or body mists. In a pinch you can try swapping polysorbate 80 and 20 around, but I really would recommend having both as they do have different strengths and are quite inexpensive. Polysorbate 20 tends to be sticky in leave-on products, so be sure to experiment with your formula to see if the amount you’re using works with the skin feel you want. I tend to prefer to use polysorbate 20 in non-skin-things (room sprays, hair mists, etc.) for this reason. An alternative for polysorbate 20 is to use the hydrosol version of the essential oil you’re looking to incorporate, if one exists.

Body spray mixture 1) distilled water 2) Isopropyl alcohol 99.9% 3) polysorbate 80 ( polysorbate 20 for room or linen spray = classification emulsifier ) 4) German plus preservative body spray 5) fragrance oil Spray bottles from Amazon Measuring cup 51 grams of water 12 grams polysorbate 80 45 grams of alcohol 6 oz of fragrance oil .06 of preservative 45 percents water 10.5percent polysorbate 40 alcohol 5 fragrance oil .5 percent Wisk ingredients same recipe as above with the exception of the polysorbate 20 for room and linen sprays only )

Great video tutorial! Thank you for sharing. One thing I have learned is net weight is different than fluid ounces/ml. The containers you have are for 2 fl oz - so depending on what you put in there the weight will be different (i.e. body gel, body lotion, body cream, or perfume).

This is amazing!!! Thank you so much for this!!!💞💞💞

Great video. I am ready to make some

Thanks, I am a new subbie! Great video!

Hi I m from PAKISTAN your video is very helpful thanks 👍

I just use oil and water...more natural. All the other chemicals not needed...my customers have no complaints

Poly 80 creates a clear blend while poly 20 still has a cloudy mix. At least that’s my experience.

What kind of alcohol did you use? Was this denatured alcohol? Thank you for sharing!

I think I can see why you have some left over. That 45g of alcohol equals about 57ml, so you'll end up with over 2oz (60ml) in volume at the end for each bottle.

Thanks

Please can tell me how much warer and cohol . ?

Is there a carrier in this spray? Thanks

Do you need preservative if you use over 20% alcohol?

Does this have a real bad smell of alcohol?? I know you said it goes away but I’ve done other recipes where it was said that horrible smell goes away and it never does! I’m trying to figure out what to do about it.

Can all these ingredients be bought in a store or all online

I have followed your method. but the formulation is too sticky on the skin. is there a solution?

Where did you base your formula

80 for heavy oils like Jajoba, while 20 for light oils like essential oils.

what's the difference between body sprays and body splashes?

Thanks for the great tutorial..can we use essential oil instead of fragrance oil? Thanks

No glycerine?

HI sandra you are doing good job just discover your channel and i was wondering what is the name preservative we can use for the product , kindly reply

It is probably a 2 oz bottle by volume, not weight.

Thank you for this video can you please tell us what scale you used thank you

Polysorbate 20 emulsifies is only water soluble and emulsifies in water as for the , polysorbate, 80 it emulsifies in water and oil. Hope that helps

Thank you for sharing ❤

Polysorbate 20 emulsifies water with fragrance or essential oils. Polysorbate 80 emulsifies water with carrier oils.

Thank you for your video, I was confused when you said you were adding 6 oz of fragrance oil, but you only put a tiny amount of fragrance oil. The two bottles you made was only 3.4 oz. Can you clarify this. I would like to try the smaller recipe

Can i use Ethanol insteed of isopropyl alcohol?

This spray can be a linen spray too?

what FO did you use and how can I convert to grams? Thank you!

Hey! was just curious if the order of ingredients is important? i mixed the alcohol and water and it started getting warm XD

If the mix is used up within 2 weeks is germal necessary?

Can Witch Hazel be used instead of alcohol?

45% water 40% alcohol 5% fragrance 10.5% Polysorbate 80 .5% preservative does not equal 100% its comes to 101%. So which one is off?

Good day. Thanks for the video. The percentages given are for a 5% perfume....what are the percentages if I want to have a 15-20% body spray?

Please can I use methanol instead of Isopropyl alcohol? Please can you least all the ingredients? I didn't get all 🙏

Plrase write them at the end of the vidio.

did you mean 6g of fragrance oil? not ounces

All good essential oils should be antibactial, so shouldn't need a microbial to mix in it.

Is this a natural body spray?

Can the 91% alcohol be used?

You did 6 oz of fo? Did you mean six grams?

80 may be heavier and sticks to the skin better.

You measured all the ingredients in grams except the fragrance. Was that a mistake?