Amazing idea and creative design.The best I have seen on RU-vid.I have subscribed because it is so good and clear.I like how you put the lengths and showed how each part worked.The most clear video and an amazing design.I am going to make this vending machine too.
I think you will. Good luck. You can follow the Mr.H2 facebook page for the best support. Link: facebook.com/Mr-H2-Creative-craft-ideas-1466705810075373/
Awesome! I think it would have been great if you had written down all the needed cardboards separately in a file or in the comments e.g. 12cmx13cm, 5cmx3cm, etc. I personally found it difficult to track each size of cardboard that is needed and thought that the whole process would be much smoother if I first cut down all cardboards needed.
As one of the few people that were bored enought to make this, I can say that it works well. Sometimes the measurements were not correct, but it was still really fun to make and test out.
Hey im planning on making this! I just have one question, Can you still get candy if you did not put any coins? (Making sure my sisters don’t steal some when i make it)
Hey I'm not the only one to uh Ask this, but can we have the measurements?I want to make this with my grandpa but we don't know how much cardboard we would need, and this video doesn't have the mesurments entirely obvious-
Can you make one that requires "2" coins to operate? I have an idea, make another "block mechanism" so if only 1 coin is inserted, the another block is still "blocked." Thank you!
No KitKats would come out because you need a good enough weight to hold it down then slide it in to dispense a KitKat anything too light or nothing will have nothing happen because it can’t push over the block
Ok so basically the rubber bands make sure the push button comes back after being "pushed". I know it's been ten months since you commented but better late than never 🙃 😅
Cardboard sizes: Main frame 22cmx22cm, mark at 8,5cm (front) 22cmx22cm, mark at 8,5cm (back) 22cmx23cm (plate) 24,5cmx23,5cm (side) 24,5cmx23,5cm (side) 24,5cmx22cm (top/lid) Money shute and return 12cmx3,5cm, mark at 2cm 7cmx3,5cm 7cmx2,5cm, trapeze 7cmx2,5cm, trapeze The trapeze ones are for the return at the sides, so you can replace these with rectangles as well as they are only there to not lose the coin. Pusher and coin mechanism 17,5cmx3cm, mark at 1,5cm on the small side 12cmx3cm, mark at 6cm 4,5cmx1,5cm, mark a point at 0,5cm from the edge at one corner 4,5cmx1,5cm, mark a point at 0,5cm from the edge at one corner 4,5cmx1,5cm 6,5cmx2,5cm, pin insert at 2,5cm Candy supply guiding box 11cmx7cm 8,5cmx5,5cm 11cmx7,5cm 7,5cmx5,5cm Candy slide 25,5cmx12cm 22cmx14cm
