How to make custom sized router templates | Make repeatable and accurate cuts with your router

Подписаться 96 тыс.

Просмотров 50 тыс.

50% 1

I needed to rout a small pickup cavity for this 3 string Cigar Box Guitar I'm working on and none of my pickup templates fit this little humbucker. I decided to create a new template that fits this pickup. I drew it out based on the measurements, and cut it out on the scrollsaw. After some filing and sanding I now have a custom sized template that will last a long time. Making templates like this is a great way to get accurate and repeatable results when routing cavities for your project.
For more info on the router bits, check out this video. • Router Bits I use for ...
-- Affiliate Links to Products Used --
3M Respirator (check your size) - amzn.to/30QMd5j
-- Visit My Website--
www.homebuiltw...
-- Ways To Support HBW --
www.homebuiltw...
-- My TeeSpring Store --
teespring.com/...
-- My Amazon Affiliate Store for recommended products--
www.amazon.com...
-- Join the HBW Built not Bought Facebook Group --
/ 623919504748705
-----Connect on Social Media-----
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
-- Join the Community on my Website --
www.homebuiltw...
-- Check Out My Handmade Guitars --
www.hayleyguit...
----- My Mailing Address -----
Home Built Workshop LLC
P.O. Box 84
Peyton, CO 80831
Join in on My Weekly Live Stream (events calendar) -
www.homebuiltw...
Please remember when using tools of any type, there is the potential for injury. You are responsible for your own safety. Make sure you know how to use your tools properly, work at your own risk, be safe, wear your safety gear, and most of all, have fun!
#guitarbuilding #routertemplates #homebuiltworkshop

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@jacquesmersereau4173 2 года назад

Maybe I missed it but it appears you completely left out which bit to use and why and all that stuff which matters greatly imo.

@jmkelly7710 5 месяцев назад

I'm literally here because I spend too much time routing out the back of clocks for the "movement" and just thought today-> "hey I should make a template for this!" I've never felt like I belonged more😅 Thanks!

@Greg-tl8rj Год назад

I like the amount of detail you gave in your video. Good work! Thank you for the help.

@homebuiltshop Год назад

Glad it was helpful!

@2AChef-n-BBQ 4 года назад

Glad it was the shop vac, for a minute there I thought you had a guest off cam😂🤣😂

@homebuiltshop 4 года назад

That crazy vacuum, its been screeching like that for a couple of years but it just keeps on going. Lol.

@2AChef-n-BBQ 4 года назад

@@homebuiltshop it's a beast

@greg4272 3 года назад

You could just attach straight edge guides by the lines and using a copying bearing router bit just router it out in one go. You would save the scroll sawing and filing process. The only places you need to go down to handwork is at the ears of the pick up. Faster, more precise.

@binnsbrian 4 года назад

I would have liked to see the template bit and how it worked.

@homebuiltshop 4 года назад

Doh, I should have thought of that. I'll have to do a short follow up. Sorry about that.

@guyh.4553 12 дней назад

I was thinking exactly to use my scroll saw. Why ½" MDF? All the "commercial" templates they are ¼" plexiglass. Wouldn't ¼" or ⅜" hardboard work instead? Just curious. Thanks for the video, I learned a lot! 😊😊😊

@homebuiltshop 12 дней назад

I like the thicker templates. They're much more rigid and the wider surface gives plenty of room for the bearing to ride on. You could use 1/4" material and it would work but there's not a ton of space for the bearing. I won't buy the "commercial" ones if they're thin. That's just my preference though.

@PuffsDragon 4 года назад

If I need to have the corners squared I will pencil mark them from the template then when done routing use a small saw of sorts to cut the corner. Good vid thanks.

@homebuiltshop 4 года назад

Yes, That's a great idea. I never thought of marking them right from the template.

@MakinSawdust 4 года назад

*_Great video Jeff_*

@homebuiltshop 4 года назад

Thanks man!

@Mark_L 9 месяцев назад

Your template was exact size but how did you account for the bushing was my first thought. With a bit of thinking….. oh ya, flush trim bit. Stay curious.

@mrkrause3 Год назад

Thanks for sharing!

@tonyw2626 2 года назад

Did I miss something there I didn’t see any guide bush you might as well just done it freehand

@steveiv9250 2 года назад

Great video. Quick question. When your making your template should you not be compensating for the router bits bushing / bearing ?

@homebuiltshop 2 года назад

I generally use a flush trim bit in my router. They cut exactly the same size as the template. If you use a bushing, then yes, you should compensate for whatever size you're using.

@steveiv9250 2 года назад

@@homebuiltshop thank you