How to make electric series board easy step by step in Bangla | সিরিজ বোর্ড বানানোর সঠিক নিয়ম |
How to make electric series board step by step easy?
Below are step-by-step instructions to make an electric series board:
Materials Needed:
Breadboard
LED lights (multiple colors, if desired)
Resistors (appropriate values for LEDs)
Jumper wires
Battery pack or power supply
Switch (optional)
Steps:
Prepare the Breadboard:
Place the breadboard on a flat surface.
Orient it horizontally, ensuring the positive (+) and negative (-) rails are clearly identified.
Insert Components:
Insert the LEDs into the breadboard, placing the longer leg (anode, positive) into one row and the shorter leg (cathode, negative) into another row.
Insert resistors into the same row as the shorter leg of each LED, connecting the cathode of the LED to the resistor.
Connect Components in Series:
Use jumper wires to connect the positive rail of the breadboard to one leg of the first LED.
Connect the other leg of the first LED to one leg of the second LED using another jumper wire.
Continue this pattern, connecting the LEDs and resistors in a series until all desired components are connected.
Connect the Last Component:
Connect the last LED in the series to the negative rail of the breadboard using a jumper wire.
Power Supply Connection:
Connect the positive terminal of the battery pack or power supply to the positive rail of the breadboard.
Connect the negative terminal of the battery pack or power supply to the negative rail of the breadboard.
Add a Switch (Optional):
If desired, insert a switch between the positive terminal of the power supply and the positive rail of the breadboard.
Connect one terminal of the switch to the positive terminal of the power supply and the other terminal to the positive rail of the breadboard.
Test the Circuit:
Turn on the power supply or battery pack.
The LEDs should light up sequentially, as they are connected in series.
If any LEDs do not light up, double-check connections and ensure the polarity of the LEDs is correct.
Adjustments (if necessary):
If the LEDs are too bright or too dim, adjust the resistor values accordingly to achieve the desired brightness.
If you have a switch, test its functionality to ensure it turns the circuit on and off properly.
By following these steps, you can create an electric series board where multiple components, such as LEDs, are connected in series and powered by a single power source.
সহজেই বানিয়ে নিন সিরিজ টেস্ট বোর্ড।
সিরিজ বোর্ড বানানোর নিয়ম সিরিজ লাইন তৈরি
কারেন্টের বোর্ড ফিটিং
How To Make An Electrical Series Testing Board. খুব সহজে সিরিজ বোর্ড তৈরি করা শিখুন
series board make at home. You can make series board for enjoy time
so friends in this video I'm going to show you how to make series board at home watch fully and enjoy.
if you enjoy this video Please hit the like button and if you not interest plz hit the dislike button and also comment
: YOYR QUERY
_______________________________
How To Make An Electrical Series Testing Board
How To Make Series Board
How To Make Series Board at home
How To Make Series Test Lamp
How To Make Series Line Easy Way
Series Board Connection
1 Like = 1 Motivation ♥️
আমরা একটি নতুন ভিডিও নিয়ে ফিরে এসেছি। আমরা আশা করি যে আপনি আমাদের ভিডিও দ্বারা সহায়তা পাবেন I এই ভিডিওটি ভালো লাগলে অবশ্যই আমাদের চ্যানেল সাবস্ক্রাইব এবং লাইক করুন।এটি আমাদের জন্য একটি পুরষ্কার হিসেবে থাকবে। ধন্যবাদ ❤️
#সিরিজ_বোর্ড_বানানোর_সঠিক_নিয়ম
#সিরিজ_টেস্টিং_বোর্ড_তৈরি
#making_series_board
#electrical
#series_board_connection
#EIM_Learning_And_Travel
#house_wiring
#series_line
#how_to_make_series_line
#what_is_series_test_lamp
17 фев 2024
