How to make fm radio easy at home - simple step with circuit diagram 

you welcome.

i am so so sorry dear. this time CXA1191P radio ic not available. but i try to find it as soon as. these project total depend on ic. i think you ic not working. check your ic and try again i hope your problem solve. thanks.

1st try to use amplifier circuit. if you are facing still noise then check ceramic filter. or try to use good quality filter. i think ceramic filter cannot filter properly.

no

@@EasyCreativeProjects Can i use a 2 pin crystal 10.7mhz oscilator instead of that 2pin 10.7mhz ceramic filter??????

@@christiancoding no my friend. ceramic filter use for filter frequency. and oscillator use for produces continuous.

try to use large antenna. i hope its show you clear sound. thanks.

simple rotate and adjust it as your demanding channel.

you can buy it from any electronic component shop.

dear you can control frequency using variable capacitor ( tuner) .

thanks.

dear you can use any available speaker. thanks.

@@EasyCreativeProjects ok, thx

dear its simple fm frequency base radio. its frequency start round about 88Mhz to 106Mhz

dear simple follow circuit diagram every thing is in diagram.

Ya hay un vídeo subido hablando de ese integrado es el mismo circuito solamente cambia el nombre del IC, o buscá Radio FM con CD2003GP

dear 2nd side of 15pf connect with 4 turn coil. for more detail you can visit our website. thanks.

@@EasyCreativeProjects so, connect third leg of variable cap to spot between the 15 pf cap and the 4 turn coil?

Hello, please tell me Ceramic filter j10.7 mhz 2 pins Not available in my country can replace the oscillator crystal 8.00 mhz or 12.0 mhz This piece is not even found on old radios or old cassette recorders 😞

ceramic filter function only to filter sound. if you don't use filter then you can found distraction in sound. you can buy it from online chanese shops. thanks.

@@EasyCreativeProjects So it is possible to close the circuit without a ceramic filter j10.7 mhz 2 pins and get the result ??? And will the circuit work with any ic sp 2003 or csc2003p (HWCAT)? Thank you my friends

@@farhadafshai9893 if you want to catch 10.7mhz frequency then you need filter. other wise filter has no other function. ta2003, or 2003p all are same name. before buying ask for radio ic. thanks.

@@EasyCreativeProjects But the fm frequency range is between (87.5 to 108) mhz While you say the filter catches the 10.7mhz frequency Excuse me, but tell me, a circuit without a j10.7 mhz 2-pin filter works ??? Does the circuit work with 8.00 mhz or 12 mhz crystals? Or we will not do anything instead, if you can close the circuit without a 2-pin j10.7 mhz filter, (Mersi❤🌍) thank you (ممنونم)/ شکرا Thank you im so so sorry but 2 pin filter j10.7 mhz not found in my country😞😞😞😞😞😞😞🌍 Please tell me

we need for control frequency, without this you cannot filter your frequency.

Any alternative component?

@@EasyCreativeProjects do they have polarity?

@@EasyCreativeProjects i found them but they have a red spot. does it mean something?

its work on 5v power supply. everything explain in video circuit diagram. watch video carefully and make same. thanks.

@@EasyCreativeProjects thanks

dear follow circuit diagram.

dear don"t worry. its very simple fm radio circuit. its total work in single ic. 1st check your ic. 2nd recheck all circuits. and try again. i hope this time you complete project. thanks.

How can I check this ic?

dear see right side 3 pin tunner connection setting. its very simple 1st pin connect with 15 number pin 2nd pin connect with 2 number ic pin and 3rd pin connect with 15pf capacitor. for more detail you can visit our website. thanks.

@@EasyCreativeProjects Can you cancel 10,7 2pin Because it is not available

dear 10.7Mhz ceramic filter is use for filter frequency. if you not use it then how you filter channel?

@@EasyCreativeProjects I have 16.93 2pin

its simple 1 ic circuit. check circuit diagram and find your mistake. i hope this time you success. thanks.

No I tried 4 times.. Not even hearing a sound.. Pls what to do??.. I did it in the same way as mentioned in the ciruit diagramme.. No mistake.. Absolutely none.. Tried several times.. But not working.. Atleast i want to hear noise..

its mean your ic is dead. try to find good quality ic and then try. its total depend on ic. if your ic dead then you dont listen any sound. if you buy simple fm radio from shop then you also find same circuit. thanks.

@@EasyCreativeProjects is it? I bought a new ic from the shop.. My multimeter is not working Or else I would have checked it.. Power is not reching the speaker that's the problem.. Thanku so much for your suggestion

dear try to learn about TA2003p ic. what is this? how its work? if you dont understand any circuit its doesn't mean that circuit is fake. its mean you do some thing wrong. if you dont like this so leave this circuit and find any other ta2003p ic circuit and try that. company make this ic only for radio. so how you say its fake. ?

@@EasyCreativeProjects my friend also tried the same circuit.. I know 2003 ic is used for radio but here current is not reaching the speaker.. I tested with multimeter..

so its mean circuit is fake or ic is burn?

@@EasyCreativeProjects lol.. As u said.. I went to my nearby electronic shop and bought 2 ic extra.. Yet it didn't worked.. This is 100% fake.. Pls no one should try this.. Pls don't waste ur time nd money

as you wish my friend.