Тёмный

How To Make Helicopter (Bi copter) 

Platinum Workshop
Подписаться 33 тыс.
Просмотров 15 тыс.
50% 1

How to make helicopter (Twincopter)
Hi everyone,
In this video, we'll show you how to make your very own remote control helicopter. We'll go over the materials and tools needed for the project, and provide detailed instructions on how to assemble the helicopter's frame, install the motors, electronic components, and remote control system, and program the flight controller.
Whether you're a beginner or an experienced maker, this video will provide helpful tips and tricks to make the process smoother and easier. You'll also learn about the different flight modes and settings you can customize to get the most out of your remote control helicopter.
So grab your tools and let's get started on building your own remote control helicopter! With our guidance and your creativity, you'll be flying high in no time.
Parts link:
Motor and esc
www.amazon.in/...
Motor clamp
robu.in/produc...
Flight controller
robu.in/produc...
Transmitter and receiver
robu.in/produc...
If you like this video
click on the like and subscribe button so that I can make more videos
Thank you
#platinumworkshop #rchelicopter #helicopter
#remotecontrolhelicopter #DIYhelicopter #rcdrone #dronebuild #dronetutorial #aerialphotography #aerialvideography #dronefootage #flightcontroller #motorinstall #electroniccomponents #buildtutorial #beginnerdrone #experiencedronebuilder #aerialfilmmaking #aerialcinematography #aerialdrone #customdrone #buildyourowndrone #DIYprojects #maker #engineering #technology #STEM

Опубликовано:

 

1 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 29   
@Unknown-nc4ce
@Unknown-nc4ce Год назад
5:25 sounds like DJI drone
@a.sanusinazareth9213
@a.sanusinazareth9213 2 года назад
Unfortunately, I'm looking for Arduino Bicopter/Twincopter not using "ready-to-rock" like flysky and KK2 fc. :( Why? I can build a million bicopters like that using "ready-to-rock"' 's components.
@MarcDunivan
@MarcDunivan Год назад
I wish there was a more helicopter like version of this bicopter...a constant speed, dual rotor with collective and cyclic pitch like a helicopter. Like CH-47 Chinook, but sideways. This would provide for autorotation to land and a bigger motor mounted in the fuselage.
@HARSHArockstar777
@HARSHArockstar777 Год назад
How to Buy this Helicopter module❤❤❤❤❤❤❤
@MarcDunivan
@MarcDunivan Год назад
You probably should add an RC helicopter flybarless system controller...for stability control...
@PlatinumWorkshop
@PlatinumWorkshop Год назад
Instead i used kk board flight controller
@Mouleybrown
@Mouleybrown 10 месяцев назад
Its drunken
@fernandoblanco1471
@fernandoblanco1471 2 года назад
Nice video Keep going
@PlatinumWorkshop
@PlatinumWorkshop 2 года назад
Thank you
@channel75239
@channel75239 2 года назад
nice but can't it go forward?
@PlatinumWorkshop
@PlatinumWorkshop 2 года назад
It can
@nitaisikdar6945
@nitaisikdar6945 2 года назад
Bro aap drone motors kaha se shopping karte ho (please reply)
@PlatinumWorkshop
@PlatinumWorkshop 2 года назад
Robu.in, Amazon
@abinpr6775
@abinpr6775 3 года назад
Good. Keep going with you're ideas
@PlatinumWorkshop
@PlatinumWorkshop 3 года назад
Thank you 👍
@fernandoblanco1471
@fernandoblanco1471 2 года назад
Very interesting topic, and well explained
@PlatinumWorkshop
@PlatinumWorkshop 2 года назад
Thank you
@shashikala4818
@shashikala4818 3 года назад
Nice mind blowing
@chrismanning1171
@chrismanning1171 2 года назад
I am converting an old toy into a bi copter. I have a few questions. Do I need propellers that turn in the opposite direction? Also, what is a good flight controller to use? Thanks
@PlatinumWorkshop
@PlatinumWorkshop 2 года назад
Yes you need opposite direction propellers, naze32 also supports bi copter firmware and it's better than kk board
@chrismanning1171
@chrismanning1171 2 года назад
@@PlatinumWorkshop Thanks. I am converting a GI Joe Tomahawk. What size propeller should I use.
@PlatinumWorkshop
@PlatinumWorkshop 2 года назад
I don't know the size of that model use suitable size
@chrismanning1171
@chrismanning1171 2 года назад
The distance between the motors measures almost 12 inches in tandem. Any recommendation on the size of the impellers I should use?
@PlatinumWorkshop
@PlatinumWorkshop 2 года назад
10 inch will be best
Далее
Building a V22 Osprey - Part 1
12:22
Просмотров 2 млн
Как открыть багажник?
00:36
Просмотров 14 тыс.
BI-COPTER Drone (RC UAM)
2:34
Просмотров 17 тыс.
Bi-Copter!? (and Tricopter!) with David Windestål
13:18
DIY DUALCOPTER (BICOPTER) - Part 2
9:06
Просмотров 21 тыс.
Drone Helicopter Hybrid
9:01
Просмотров 3,7 млн
BiCopter / V Copter Build
17:44
Просмотров 13 тыс.
Why we don't use bicopter drones?
2:52
Просмотров 10 тыс.