How to make JBL Charge 5 Louder 

1dB is not doubling the actual sound energy. Every 6 dB represents a doubling of amplitude, however a better, though also non-exact, rule-of-thumb is that every 10 dB increase is a doubling of perceived loudness.

Thanks for this! My only issue with this speaker so far is the volume steps are just way too steep. It goes from quiet at one level and I turn it up just one more level and it's super loud

Da forma que você fez diminui muito as baixas frequências e deixa a caixa mais plana tirando os ganhos que vem da jbl, que buscam um resposta de frequência em forma de (U) que é a curva de resposta mais agradável para os ouvidos 👂.

Wow!! I follow your idea and make this to all my jbl speakers: jbl charge3, flip4 and xtreme2. I didnt have industrial foam, filled with sanitar foam, but wow! What an improvement!! Not specially for overall power, but what I notice wright away was the better overall sound, charge3 became way more crisper! No more muffled sound, is really incredible! No need to use equalizer now. Same improvement to clip4, is not harsh, just clearer and think also a little more powerfull. Is just like a new (better) firmware made. At extreme2 the sound was so obvoius cganged, but is there! Of course we dont have same ears and we have different expentantions from a speaker, but for me was a noticeable improvement, why they dont put foam in speakers in factory? Thanks a lot for this video, yoyu make my day a lot more happy, no need now to upgrade flip4 to flip6, or charge 3 to charge6, the sound now is really nice to old generation! I'm interested more for the sound quality and less for overall power. Respect! :)

All you did is change the resonant frequency response, the human ear can’t distinguish a db or two. Also your decreasing the cooling of the amp, as that moving air in the chamber helps cool the heat sync.

Im gonna try 🔥

Is that gonna be burn when heated for long duration of playing?

Hi dose this make the speaker sound disoriented

I used do this with my car sealed subwoofer box. Not to make it louder, but to lower the bass frequency output. I think you should experiment with how much you wading you put in. As a rule I only used to fill 75% of the cavity, as I found any more than that would make the sound worse.

Hi there,I get a distortion sound on my JBL charge 5, anything I can do to clear this?

and is it true that after the update she lost the tombs?

How about changing the twitter with driver/speaker? I think charge 3 driver fits 🤔

Please what can I do my JBL fliip 5 speaker bass is not working but treble working and what can I do

U just can turn up eq in JBL Connect to 1 point on middle and highs.

good job

I am the guy who likes the sound just the way it is lol....thanks for this video

I like my speaker just the way it is

what magnets are used on neodymium speakers?

Does this not make it hotter

Outra coisa! assim você diminui a troca de calor e os componentes internos vão esquentar mais e consequentemente perder potência e consumir mais bateria 🔋.

🇮🇹se uso un pannello insonorizzante? - 🇬🇧 if I use a soundproofing panel?

Its got prs No need for Foam

The one you have is an ND Model, the TL (TT) is louder than the ND Although the ND has a better bass response than the TL (Because many people preferred this model because of that better bass). And the TL one has good deep bass. But still, both sounded great 👍

😮Ciao non si daneggia il woofer?

รุ่นนี้เป็นโมโนหรือสเตอริโอคับ

Will it damage

If a 47 ohm series resistor is connected to the speaker, white noise will disappear. 👍😎 ( sound intensity decreases but white noise disappears ) '' Try and see ''😎

😮Ciao ho fatto la stessa cosa per il jbl go 3😅

I don't care if it's louder, I care if it sounds better. Do you think it sounds better?

How do u take the skin off ? You skipped a step

Caution fire hazard

Lol or just clean your ears properly😂