No video :(

HOW TO MAKE LOGITECH INVERTED PEDALS DIY

Подписаться 221 тыс.

Просмотров 2,3 млн

50% 1

How to build a stand for inverted Logitech Pedals. The DIY stand is designed to be easy to assemble and low cost. A great Sim Racing mod for your simulator. See more details below.........
The 18page Build Guide with Template and dimensions available here: bit.ly/2Z6NoJV
PARTS
• 1x MDF Sheet 900 x 600mm x 12mm
• 2x Square Steel tubes 25mm x 25mm x 1metre length
• 8x M8x50mm Bolts ebay.us/wDYXEy
• 8x M8 Nuts ebay.us/vnkwjH
• 6x M5x45mm Counter Sunk Bolts ebay.us/LYBwZf
• 6x M5x20mm Counter Sunk Bolts ebay.us/ftHYYz
• 12x M5 Nuts ebay.us/6bx2Cl
• 6x M6x20mm Bolts ebay.us/6bx2Cl
• Spray Paint
• Carpet Tile carpet.
• 6x End Caps - 3D Printed or ebay.us/dkLzXv
• Cable holders ebay.us/Vn5SC3
• Contact Adhesive Spray
*Carbon Wrap BG bit.ly/3btqdWy
This site contains affiliate links for which I may be compensated
TOOLS
• Power Drill ebay.us/OeqNqA
• Drill bits ebay.us/7attpn
• Center Punch ebay.us/XLgd1o
• Flat and round File ebay.us/j4UKtw
• Sandpaper ebay.us/MoBTpw
• Scissors www.ebay.com/i...
• Spanner 8" ebay.us/I8SLeT
• Allen keys ebay.us/i1zkdZ
• Ruler ebay.us/ZK4ENC
• Marker pen / Pencil ebay.us/gJcfMD
• Solder bit.ly/3oQsyhe
• Soldering Iron bit.ly/3cWeEYh
• My Soldering Iron ebay.us/gUIMh3
• Butane torch ebay.us/44ww4A
• Clamps or Bench Vice ebay.us/KDpxRY
• Utility Knife ebay.us/qcTpDO
• 3D printer bit.ly/3zRHPVf
• Wire cutters bit.ly/3Bz8acd
• Wire strippers goo.gl/4PFXny
• Heat proof solder mat BG bit.ly/3SonQ7Q
• A3 cutting mat ebay.us/WEKZ7w
• Vinyl Squeegee ebay.us/XK2YpG
This site contains affiliate links for which I may be compensated
Options
2020 tube bit.ly/2xRZXQY
MY SIM SETUP
Fanatec CSW 2.5 Wheel base
Fanatec F1 carbon, BMW, Universal Hub, McLaren wheel
Fanatec CS V3 Pedals
Fanatec Handbrake V1.5
Fanatec H pattern + Sequential Shifter V1.5
Fanatec Rennsport V2 cockpit
Amstudio DIY Button BOX • MAKE THIS BUTTON BOX |...
Sparco Seat ebay.us/putCtx
Get Fanatec here: www.fanatec.co...
3d printer used in this Video
TEVO Michelangelo: goo.gl/AEaEtr
3D Filament BG goo.gl/psPzT6
Ender 3 BG goo.gl/PMeUyz
Thank you for watching, all comments are welcome.
Share the video with a friend who would like this video!
Subscribe to AMSTUDIO channel
/ @amstudioprojects
Copyright © AMSTUDIO 2018 All rights reserved | amstudioprojec...
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Опубликовано:

24 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,3 тыс.

@samuelgrabanica 6 лет назад

Video on how to prevent your chair from rolling away from your desk while braking

@HepauDK 6 лет назад

I started by using a kitchen chair at first. I even made a wooden template for the front legs to get it positioned right every time I wanted to drive. That got too annoying, so I built my own sim rig out of dry wall rafters, a brace plate from an old office desk and some pieces of 20mm concrete casting plywood I had lying around. Oh, and a bordeaux leather seat from an Alfa Romeo 156 '99 (passenger side). :) No matter what, something needs to be done, or you will ruin the drive in the wheel by holding on to it while braking.

@Hugo-pj4bm 6 лет назад

ripsen use old shoes, works perfectly for me 😂

@samuelgrabanica 6 лет назад

Hugo what do you mean bro where should i put them behind my chair?

@samuelgrabanica 6 лет назад

Hugo lol hahaha thank i will try it out cause currently i taped my chairwheels hahahahah

@samuelgrabanica 6 лет назад

Hugo holy shit it actually works love u man

@LEPOX208 3 года назад

Fun fact: You're watching this even though you know that you'll never build it, you just like the concept.

@MrammiR 3 года назад

I dont even have g29👁️👄👁️👍

@kullimuumi6889 3 года назад

@@MrammiR me either :D

@Fluffy_g3 3 года назад

Nope I'ma build it tomorrow

@colebaranek4604 3 года назад

Hold my Dr Pepper and erectile dysfunction meds. Finna build this Saturday... but out of all wood because I'm cheap AF.

@Zeeem99 3 года назад

yup!

@alfonso25959 6 лет назад

Is not DIY what you doing, is ART.

@mikevdheul 6 лет назад

alfonso25959 okeh

@falkiss6755 5 лет назад

Its more than Art its gods plan

@jeremymartello8024 5 лет назад

What does art mean?

@JamesW81 5 лет назад

@@jeremymartello8024 he used to sing with Paul Simon.

@SixthyGTi 5 лет назад

DIY art... :)

@ChubbsWho 5 лет назад

after using the pedals as standard for months i can honestly say this is a massive change and tthe best pedal mod ever! thank you!

@amstudioprojects 5 лет назад

Thank you!

@pimpnetcrew4916 5 лет назад

Are using in a rig or at a desk?

@jumukene65 Год назад

Same here its much better for my sim

@sulphurous2656 Год назад

Better than the modified rubber block?

@brettknibbs9351 9 месяцев назад

@@sulphurous2656 ya would wanmt to do that as well. or a load cell kit or a truebrake kit this makes the pedal push the right direction it doesnt change the force applied to it

@flimsy357 5 лет назад

As soon as you showed the metal tubes, I knew I couldn’t do this for a while

@BlakjeKaas 4 года назад

I'm not sure if you need metal though, the most stress will occur in the wooden bracket. If this holds up, the rest should too. I'm probably going to try this soon, but will be using wood instead.

@gkoshinsky 4 года назад

I made the same thing out of plywood. It's probably more solid than this. Doesn't look as good.

@Domijizzle 4 года назад

I don't see why you couldn't just swap out the metal for hardwood

@Rinyotsu 3 года назад

I used aluminun tubing, a little more expensive but any hacksaw with metal blade lubed with wd-40 can cut it, took about a minute for each cut. I recommend clamping or putting something very heavy on it, will make cutting easier and just let the blade do the work, don't push the blade into the metal.

@Sh-hg8kf 3 года назад

@@BlakjeKaas me who cant even get wood/plywood around me :(

@Kuli24000 7 месяцев назад

For those wondering, you can just swap around the clutch and gas pedals and put all the screws back in so it's a nice sealed unit again. No having to disconnect cables or anything.

@MansaEdits 3 месяца назад

That's what I was thinking of doing

@Kuli24000 3 месяца назад

@@MansaEdits Nice. Yeah totally worth it. And the pedal plates are adjustable (3 positions per pedal). So just customize it to your liking.

@kalanlove4916 2 года назад

Pro tip: buying his plans in the description make it soooo much easier. $6 and will probably save you hours. Very good set of instruction.

@sagarisone 6 лет назад

Jesus Christ, that Heel-Toe Downshift at 5:19 is CLEAN.

@jamesmotorsport9062 5 лет назад

Shit your right

@gilmourvibes9078 5 лет назад

@@Spike00773 I edit the game file and remove auto blip throttle haha

@iThinkImFast 5 лет назад

He needs to learn to drift tho lol

@JonathanJones-fo4zg 5 лет назад

Absolutely no point in doing it lol you don't have to keep the rpm's at what they were. Maybe if it has a massive turbo and you're starting in 2nd, then again you still wouldn't need to use both if you know how to use a clutch. You don't have to replace the clutch so use that and the e-brake, BAM! Just improved your lap time!

@JonathanJones-fo4zg 5 лет назад

Pumas?

@colejester161 Год назад

Just wanted you to know that 4 years later people are still purchasing your instructions and building this. Thank you so much!

@AWSpoofwil 2 года назад

I cannot fully express how amazing this upgrade is. I had to fully redesign the front end of my sim rig to facilitate this, and it was 100% worth it. Go to the link and buy the instructions. Then go to lowes and buy all the materials to make it. For carpet, I used a rubber based work mat with a fabric top, and used loctite adhesive (looks like caulk) to adhere it. Worth every single penny, a definite must have for all the g29 pedal users

@timmins2k215 11 месяцев назад

How much does it cost in suplys to make this?

@AWSpoofwil 11 месяцев назад

@timmins2k215 kinda depends on the sim. I built my frame out of square tubing, since I have a welder and such. But just cost for the inverted pedals, mat, hardware, etc, I think it was around 40 bucks. Something I would recommend after using it a lot, is a padded base for your feet to rest on (if you don't run shoes on your sim, I just run socks bc I'm lazy lol)

@timmins2k215 11 месяцев назад

@@AWSpoofwil nice one bro im guna buy some and make it for my g920

@zainhaider8362 6 лет назад

I did this about 5 years back and it really made a difference to my experience. Of course, your end product looks very professional whereas mine was a much more agile (making it up as I go along). I may actually use your design this time round.

@tomasruival9804 3 года назад

How did it reflect in laptime? Did it really make it more precise?

@pedrosilvaproductions 3 года назад

@@tomasruival9804 that probably wont change much. But the feel and immersion will probably be better

@vladalexandrumocanu4442 5 лет назад

Hey, thank you very much! This is the second project I am building using your tutorials (the first was the button box). I bought the guide and all the materials - looking forward to start building the pedal stand :D I think the next project will be a steering wheel swap, again using your tutorials. Please do not abandon this hobby and never stop sharing it with us :D

@vladalexandrumocanu4442 5 лет назад

I wanted to add that I finished building the stand - I still need to add carpet and paint it, but it is fully functional. Here are my observations: - using steel tubes is overkill - I used aluminum tubes and even so, I had difficulties with cutting/drilling (it's true that I do not have the best/proper tools nor do I have the space for them); I am planning on building another one for one of my friends, but I will totally switch to similar sized wood beams; either way, the design is rock solid :D - there was no need for the sheet of MDF to be sized 900x600 - if you use the space correctly, 900x400 is enough - I recommend using washers for the M6 bolts that hold the pedals That's about it :D In no shape or form am I complaining about anything. I am very pleased with how the project turned out and I would like to thank you again!

@lilweg 3 года назад

I just built this entirely out of wood, big improvement! thanks for the idea and plans my man!

@captaindave5686 4 года назад

I just finished building my own one today and its absolutely fantastic!!! The instructions were clear and good to understand! Love the angle of the Pedals. This absolutely changes my way of Sim Racing! Keep up the good work! My next plan is building the Handbrake👍🏻

@jamesi2018 4 года назад

handbrake

@captaindave5686 4 года назад

JAMES IRVINE thanks mate 👌🏻

@crashovride02 Год назад

Bought the plans and finished yesterday! Was super easy and fun. Just have to paint it but it's too cold where I live at the moment. Thank you

@amstudioprojects Год назад

Nice work!

@davidpardy 2 года назад

Finished my build today and mounted it to the racing stand I have. Looks and feels great! The only problem I had was with the spray adhesive, despite following the instructions it never seemed to set properly, so I ended up using a staple gun to mount the carpet tile. Also installed the GTEye springs at the same time. Thanks again for your great tutorial and the downloadable booklet!

@no.7893 2 года назад

some adhesive sprays need a primer / catalyst to be applied before it will actually become sticky, we have a tin of spray adhesive that does nothing unless you use this primer marker pen first. It's a bit stupid but worth noting and looking out for when buying spray adhesive.

@davidpardy 2 года назад

@@no.7893 Thanks for the tip!

@ezzy07 Год назад

Hey mate what racing stand do you have?

@davidpardy Год назад

@@ezzy07 I have the "Marada" brand one you see on Amazon and such. It was the cheapest I could find that looked reasonable. It's not the most rigid for the wheelbase but I'm fine with it. I now have all Moza stuff

@theironguygaming2326 4 года назад

I've already done your silence mod (love it), now I'm going to do this but instead of carpet I'll use check plate aluminium and carbon wrap instead of paint... Put this with some gteye springs and I'll be laughing, love the work as always mate! EDIT: ABSOLUTELY LOVE IT!!! springs on the way but the inverted pedals are finished! highly recommend!

@amstudioprojects 4 года назад

Sounds great!

@mattyt531 Год назад

I made this for my pedals and it's a better experience. It was a fun project.

@benwebb9059 9 месяцев назад

Best mod I have done to my diy sim. Highly recommend this mod. Added the same carpet and other bits to make it match the rest of my rig.

@ph.manuel4589 6 лет назад

Maybe a good add for those who play multiple game or for more realistic feel. Its a good idea to may as well build your own foot rest by the clutch pedal so you have something your left foot to rest on instead of pedal. Im not a left foot breaker IRL and in SImRace Community so a foot rest is a must for me. Also very usefull for ETS2

@HepauDK 6 лет назад

Brilliant. Absolutely brilliant. :) The way the pedals are opperated with the original base just feels totally wrong when you are an experienced driver.

@parkerchace Месяц назад

I hope you know this is well beyond most people's DIY threshold. Drilling larger holes for the sockets to go into...that's beautiful stuff, though. Cheers

@DontWasteYourLantern Год назад

TY, I have built it yesterday, and it works perfect. Took me like 4h xD

@Aria18976 4 года назад

I bought the plans and nearly finished making it! Also to save money I swapped the 25mm steel tube for timber and it''s plenty strong and rigid and cheaper than steel if anyone wants to make it on a budget I recommend doing this. Edit: After now using the inverted pedals for a while I can say they feel a lot better and more solid, like a higher end pedal set. Now I am going to make my own load cell brake and it should be just as good as more expensive pedals.

@electric7313 4 года назад

How smooth did it go for you with making the angle template

@KyranSmit 3 года назад

can you please send the plans to me i dont have paypal

@dk_rifter 6 лет назад

Please fill eBay with all the stuff you make

@Alex_1652 6 лет назад

@AlexSmith-ow9yo 6 лет назад

up!

@INTERIORViZ1969 6 лет назад

Please!!!

@wuzihuzi 6 лет назад

Lazy arses! With the cost of man hours you may as well buy some fanatec inverted pedals

@INTERIORViZ1969 6 лет назад

Lochlan Hughes shut up

@trekkiepro 4 года назад

It's been one year since i built one of these. It cost a dollar to download the plans. Best dollar i ever spent.

@KyranSmit 3 года назад

can you please send it to me i dont have paypal

@stvticsteve7249 3 месяца назад

Built this a couple years ago using your video and substituted the steel for wood and it’s been great! Thanks for these videos!

@holon75 3 года назад

I'm a metal fabricator and after seeing this! So much I can do.

@jamesmotorsport9062 5 лет назад

I made this and bought your $5 instructions and it was worth it

@rubenrest1212 2 года назад

Built it out of wood with screen printing plates, very easy but super effektive and solid concept! Thanks mate!

@calledtim_ Год назад

Bought my wheel second hand and the dude actually build this. Thank you mate lmaooo T300 GTE Ferrari and these pedals for 200€ were pretty good imo

@alminhadoceu 2 года назад

TOTAL COST & SOME TIPS I just bought the build guide for 5€, and assembled everything. Wonderful! I got the G923 2 weeks ago, and I decided to invert the pedals after an hour of use. For me, it feels more real and easy to use. The build is really sturdy... Items and total cost of the build (in Portugal): Build Guide - 5€ (don't even try to build it without the guide, it will take you so much more time and effort to calculate every hole and measurement... amstudio's work is incredible and will save you time that you will need when building it); Metal Square Tubes - 10€ (I bought a 2meters iron tube for 10€, I just had to cut it in 5 pieces, being the last one a left over that I use to practice the drilling); MDF - 5€ (I just bought the two pieces cut in the right dimensions); Bolts/Nuts - 10€ (I just bought half of them, spending around 4€, since I already had a few, but if you buy everything you will probably end up spending around 10€); Carpet - ?€ (I used a rubber boat seat covering that I have... it gave it a nice look, feet don't slip, and it is easy to clean... prices were kinda high for a proper automotive carpet from what I could see); Tools - ?€ (I didn't need to buy anything, since I have a lot of tools, but not only drills and spanners are important... 4 or 5 clamps will help you a lot too, as well as a spare pair of hands) TOTAL: 30€ (if you don't think of going for optional and additional stuff that you don't have like paint and carpet) If you are on a budget just work with what you have and you'll probably get a lower total cost than me :) In terms of hours of work, not counting the time I spent getting some parts in store, it took me between 8 and 10. I planned and sketch everything alone, but I had a lot of help of another person when drilling, cutting and assembling things. I'm from Portugal, and the store I recommend is "Maxmat" (I went to the one in Moita - Margem Sul). Two of the main competitors (Leroy and Barão e Costa) have a poor service and fewer options to choose from. Maxmat didn't even charge me for the MDF cutting, and I bet they would do the same for the metal tube if I would buy it there. Hope it helped!

@kevinblom5940 2 года назад

I Don't have pepal but can you tel me how many degrees that corner is?

@Hassenator 2 года назад

Thanks man

@Jimmy-jz4pp Год назад

@@kevinblom5940 you got It?

@kevinblom5940 Год назад

@@Jimmy-jz4pp nah still not

@angeljoelfrancis9174 5 лет назад

Man, you are nothing short of being a genius.

@wolfe1970 6 лет назад

If you dont have a small bit of carpet a door matt works just as well, great video

@highwaltage 7 месяцев назад

man i did this years ago with my diy pedals. like a decade! lol.i also have shaker motors from an old xbox controller attached to the brake and accelerator pedals. was like my first video on my channel lol. good to see it :)

@TheBlue028 6 лет назад

Another top quality mod, awesome job man, your production quality is outstanding.

@nsmb6647 4 года назад

Bought your plans and built this mod myself. Works so well - thanks!

@KyranSmit 3 года назад

can you send them to me id dont have paypal

@playernotfound5438 3 года назад

@@KyranSmit Do you have this?

@lorha1159 6 лет назад

Thanks for doing what you do. Wanted inverted pedals but not willing to shell out that kinda money. Did some looking and found this video along with your complete plans on pinshape. Built them and love them.Thanks!

@michaborowy2160 10 месяцев назад

This is the best tutorial i have ever seen. Everything is so clear even a todler would understand that. Im giving you a sub man. This month i am making this and im telling my sim friend about this vid keep it up!

@VegardE 2 года назад

I like the fact that no one has dissliked your video! Success!

@simkarte123 6 лет назад

0:00 the automatically created subtitles say "[Music]" xD

@rafee9442 6 лет назад

simkarte123 It is music to my ears.

@halo3rat_709 6 лет назад

best music love the sound of an engine

@isaacsrandomvideos667 5 лет назад

simkarte123 well they aren’t wrong.

@Brunnix2011 5 лет назад

hey dude, just bought the plans to build this for my new sim rig, im super exited to see how it turns out, but great job with the plans, they are awesome super detailed and clean build guide ;) ... Thanks for all, and keep up with your amazing jobs.

@amstudioprojects 5 лет назад

Thanks! Enjoy the build.

@LancelotNZL Год назад

Great guide I just love the assumption that we can make the clips on "the 3d printer" like we all have one just sitting in the shed :)

@legomyfego 5 лет назад

I did this just velcroing/taping my pedals upside down to a cardboard box (the one the steering wheel came in) and using other smaller boxes and some paper to finely wedge it underneath my desk at home. It looks decent enough and feels great. No need for screws and electronics!

@WilmoTheBear 5 лет назад

That looks amazing, might actually have to try and build this.

@javiern4278 6 лет назад

This is gold, suscribed!

@dragonste 4 года назад

Smashing. Just bought and built these they are smashing. The carpet really makes it a nice finished job. Thank you! Im on the waiting list for a wheel at the moment. Im like 1 millionth on the list. Looking forward to that you must be busy. Keep up the good work.

@LBsEpicTutorials 3 года назад

How did you attach the carpet? Just using the adhesive spray?

@dragonste 3 года назад

@@LBsEpicTutorials yeah carpet glue spray and it hasn't moved at all.

@LBsEpicTutorials 3 года назад

@@dragonste alright thanks

@elmerbalentina5574 6 лет назад

I think this is one of the best mods for a G920! I will order the parts this week!

@joshua3287 6 лет назад

Awesome! I've been waiting for a long time for a detailed and professional tutorial on this. Thank you!

@truescotsman83 4 года назад

Hold on a second, I’ll just go get my imaginary workshop ready and bang this out

@wyattvlogs1190 Год назад

Damn that carpet job is fresh.

@BeatsOnSub Год назад

Exactly this! Dont even need to search anymore! Perfect video!

@Ivar_Kahrstrom 6 лет назад

The Clamps on My g27 broke some time ago and thanks to logitechs amazing customer service I got a new g29. I am now going to do This with the old pedals😁

@joselistic_racing 6 лет назад

TheFerrariMan They give it to you for free?

@Ivar_Kahrstrom 6 лет назад

Jose.SimracingCR Yes, I couldn't use the old wheel due to the Broken clamps, so they sent the whole g29 kit since the g27 isn't available anymore.

@giorgostatarakis3165 6 лет назад

mine broke and I used C-clamps

@pirozcontractor6006 6 лет назад

TheFerrariMan You lucky boy . . . Now you can do his wheel mods as well! Edit: Why not make a sequential shifter out of the old one?

@Ivar_Kahrstrom 6 лет назад

Yeah, I was actually thinking of doing something like that, allthough that'll have to be later since I just bought an old go kart frame that I'm hoping to turn into something fun.

@PuRe_AdDicT 6 лет назад

Excellent! Now how do you mount them to the most popular seat, the Playseat? :)

@Rinyotsu 3 года назад

You can also use the base plate where you unscrew everything as a template for pedal bolt location

@jamess8175 4 года назад

This is a pro's job, that's why he made it look easy. Look at his precision measurements, cutting, drilling, etc. For anyone else other than a pro, it's a sure way to screw it up altogether. Your money down the drain. He is also an excellent driver who utilises heel-toe rev matching techniques. A talent indeed.

@dimitrijekrstic7567 4 года назад

Lol this is all very basic stuff. Get a bit more material if at first you don't succeed, but even that isn't necessary, because you should measure everything a few times before cutting, and you are good to go. And when it comes to the only cutting being done here, you can have someone cut it for you, at a shop that sells wood or anyone who has the tools, if you ask nicely you probably won't need to pay. But then again, you could do it yourself. It's not that hard really.

@GuernseyDave943 4 года назад

Thanks for the video, just done the same, following your guide, happy new year from Guernsey.

@amstudioprojects 4 года назад

Enjoy!

@ryanmitchell420 6 лет назад

Soooo good. Alot more simple than what I first thought thanks!!!!!

@KacKLaPPeN23 5 лет назад

Great idea, gonna adapt it for my T3PAs when I build my DIY Simrig. Mad props for driving on my favorite track too, Tsukuba is awesome.

@shawndixon4536 7 месяцев назад

I bought the T3PA-Pro because the factory frame allows the pedals to be mounted either way. I didn't even try them before I inverted them.

@RotaryDaddy 4 года назад

Was not expecting the quality that you brought man this is great!

@cesarcpr 6 лет назад

This is so awesome, and it looks great too. Maybe once I purchase a wheel stand I'll be doing this setup. Thanks for sharing this video, and thanks for all your other videos. Cheers.

@jayhawk184 5 лет назад

this is the greatest thing ever im so glad you made this thank you!

@viperion_nz 6 лет назад

This is awesome but do you have any more details on what the "correct" angle for those side braces are?

@ATLRIOT 6 лет назад

This is a great video and I love DIY but for me I prefer my V3 pedals over my Inverted V3 pedals for the sheer reason that most race cars pedals are not inverted. But when I practice before I go to a track day I pull out my inverted pedals because that's what my Rx7's are in real life. This is an awesome vid and will help people get what they want with spending a dumb amount of equipment like I did.

@toast2657 6 лет назад

You're amazing. I am going to order everything i need to make this now! :D

@huyanh3528 6 лет назад

Finally , i waiting for this for so long

@ekoewicaksono 6 лет назад

Even though I don't make any of these sim racing project, I still enjoy your video. Keep up the good work!

@scaredcrew 3 года назад

This Channel is gem

@arenigac 6 лет назад

So simple, what a great idea

@CaioCRCosta 6 лет назад

Who's awesome? You're awesome!

@TheScania1991 6 лет назад

This is gold. I planned to build a Sim Rig myself out of wood, but now i can use this to make my pedals inverted. Thats the one thing i never liked about the Logitech wheel sets. Did you, by chance, have a tutorialk of for a self made sim rig?

@jessicabrecken6466 3 года назад

I built it and added lighting I saw on another video. It works incredibly well! Great idea👍

@amstudioprojects 3 года назад

Nice work!

@jessicabrecken6466 3 года назад

Thank you. I love my setup now albeit basic with a Logitech g29 wheel and inverted pedal set with the Logitech shifter. All attached to a GT omega Apex stand and I’ve added Gteye springs for all pedals and a magnetic adapter for the paddle shifters. I have to say that anyone that owns a Logitech wheel, you must get the magnetic adapter for the paddle shifters. It makes a world of difference with feel and reality. Especially playing Assetto Corsa Competezione. Playing it on my PS4 Pro went from super fun to insanely realistic. I practice at least 5 hours a day on ACC. It’s my outlet lol. Very basic setup that I hope to upgrade soon as funds will allow. Keep practicing sim racing and you will get great. My recommendation is to not just use the paddle shifters but use a regular 6 speed shifter with clutch use. Every bit helps.

@K3NnY_G 6 лет назад

5:37 - Damn, dat wheel rotation.

@noturbusiness2391 4 года назад

nothing wow in that ,,wheel rotation,,

@w212.agency 6 лет назад

massive legend

@21kaduku 2 года назад

Just finished doing this tonight! Last step is to screw the mount into the rig that keeps my office chair from rolling

@RetroPlus 2 года назад

That looks seriously professional, awesome conversion

@GrauHer 6 лет назад

Love this channel because those DIY of you!!!!

@swooty2805 4 года назад

"How to make logitech inverted pedals DIY" step 1: put the pedals upright And you're done!

@i7rooper 4 года назад

and then just swap the pedals plates

@ciliberti96 4 года назад

But this is cooler

@mindaugaszaleskis9500 4 года назад

@Ben T. you can easily do that in almost every game

@Skippy-id9yt 4 года назад

@@mindaugaszaleskis9500 just put the effort in and do things properly the first time around! Applies to most things

@lemonotype2 4 года назад

Thanks man, bought the plans and making this was a fun afternoon during quarantine, came out perfect even with a 30cm wide board (all I had) but keeping distance between pedals the same.

@amstudioprojects 4 года назад

Nice work!

@Morse- 2 года назад

Thanks for inspiring me to do vertical pedals, thanks a lot.

@zigahrovat255 4 года назад

I really think anyone could do this i made it using only wood and it works great and it takes one afternoon to make.

@adityawaghe5922 6 лет назад

Please please make a video how to make pedals for Euro truck simulator 2

@halo3manfreak Год назад

Simple, and straight to the point. Excellent video!

@themadisonjt9108 11 месяцев назад

i always found it so uncomfortable the way the pedals are. i love this tutorial! i’m gonna use it for my trucking rig :-)

@TheDoghousegaming 6 лет назад

Amazing mod keep the videos coming

@alexruiz1197 6 лет назад

What about a video of how to build your own cockpit?

@pirozcontractor6006 6 лет назад

Alex Ohhh yes.

@FatalFrostbyte29 5 лет назад

buy one

@FatalFrostbyte29 5 лет назад

Jessie, dude you can’t even take a somewhat of a joke

@Gorilla_Jones 4 года назад

All of you, SHADDUP

@anthonypllu3864 6 лет назад

thanks a million, been looking for ages on a simple and get explanation on how to do that

@GenomeGorilla 2 года назад

I don't even own the g29, I was thinking about buying one soon and discovered your videos. I'm about 7 videos into this rabbit whole of your channel guess I have to subscribe.

@tommyv4980 5 лет назад

Thank you so much for sharing this with us, you goddamn genius you.

@kswitch5870 6 лет назад

this channel is awesome

@JimmY08_r 8 месяцев назад

Can‘t stop watching this

@aarondirix2876 2 года назад

That's a really neat explanation. Thank you for your effort!

@Jimmyfpv_ 6 лет назад

2:58 +EmptyBox You’ve been summoned

@davidwing8879 3 года назад

Whats goin on guyyys

@DrMurdercock 3 года назад

I used to want a 3D Printer, but with how far they've come and how cheap they are, it's almost something every tinkerer/hobby/tool/hands on dude/girl/alien/they/them/helicopter should have.

@torquilh 7 месяцев назад

You made the whole video to show off your heel-toe skills right? :-D Very cool upgrade. When i build my sim rig i am totally doing this

@joseluispaternina 10 месяцев назад

Hi, I did that before to see this video, I did not move the conectors, just dissasembled the whole pedal, switched spings, removed the bother black piece inside the break and changed the spring for a softer one, assembled the pedals again, I switched cluth and accelator because of the new upside down diagonal position and it works perfectly.