How To Make Simple RC Airplane For Simple Radio Control. DIY RC Aiplane & Arduino RC

Подписаться 439 тыс.

Просмотров 9 млн

50% 1

Can model aircraft be controlled with a simple Arduino radio controller?
Arduino simple radio control. DC 180 Brushed motor
Thanks for watching. If you want to support my channel, join.
/ @kendin-yap
You Need:
* 20A ESC: s.click.aliexp...
* 9gr Micro servos: s.click.aliexp... or
www.banggood.c...
* 5gr Micro servo: www.banggood.c...
* 2S 7.4V 450Mah LiPo Battery: s.click.aliexp...
www.banggood.c...
* 1.2mm Pushrods: s.click.aliexp...
* Servo control horn: s.click.aliexp...
* Adjustable Linkage stopper: s.click.aliexp...
* Wheel: s.click.aliexp... OR
www.banggood.c...
* DC 180 Motors : s.click.aliexp...
* 108mm Propellers (CW&CCW): s.click.aliexp...
* 18awg silicone cable: s.click.aliexp...
* 5mm kraft foamboard
* Lipo Battery Charger: s.click.aliexp... OR
s.click.aliexp...
Hot melt Glue Gun: s.click.aliexp... OR
s.click.aliexp... OR s.click.aliexp...
Making Simple Arduino Controller Video: • Cheap and Simple Radio...
Arduino Radio Controller Schemes : bit.ly/2SDJkAV
Approximate flight weight: 169 gr
CG: 46-51.5mm back from the leading edge of the wing, measured at side fusulage
Dimension Schemes: bit.ly/2vKUCur
How to make Arduino radio control video: • Cheap and Simple Radio...
Thanks for watching. If you want to support my channel, join.
/ @kendin-yap
Some of the shops that sell Kraft Foam Board:
www.amazon.in/...
pacon.com/boar...
tinyurl.com/4u...
www.foamboard....
www.enasco.com...
www.mwmaterial...
Kraft foam board: It is a Styrofoam material whose outer surfaces are covered with kraft paper.
My Web Site (KendinYap): www.rcpano.net
All of my videos: bit.ly/2Z9QVYK
Thanks For Watching And Please don't Forget To Like, Share & Subscribe For More Awesome Videos.

Хобби

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 3,3 тыс.

@Pavankumar-70 4 года назад

Just being honest...I just watched the ending of the video first to ensure if that actually fly...

@congobelga6840 4 года назад

Ha haa

@shivans5169 4 года назад

Yaa me to lol

@ManishSingh-ug3vh 3 года назад

Same here

@bhargavdayal8595 3 года назад

ha ha ha.... same here.

@adelmerad9727 2 года назад

Same

@SuperViral1 Год назад

Very nice 👍

@PrinceJBeatz 4 года назад

11:15 perfect landing

@0garythebloke0 4 года назад

I've made this using underfloor heating insulation 6mm, it's not as strong as the foam board but I had some left over. Not sure about the speed of motor required either but it feels fairly powerful. Waiting for a wind free day before I go out and smash it to pieces 😟☺ oh by the way mine weighs only 132g

@regcav87 4 года назад

Did it ever work?

@0garythebloke0 4 года назад

@@regcav87 Hi, sorry I didn't get back to you. The plane tried to fly but it was underpowered. It landed badly and snapped the front off. It wasn't really repairable so whilst waiting for a motor with the correct speed I built another using the corrugated plastic used for sign boards. This one was a lot heavier but very strong. I'm not an accomplished flyer so I let my friend do it. This time it did have enough power but it nosed down soon after trying to turn ( unsure if it was the wind, plane or flyer) There was no structural damage but the motor shaft had bent so didn't get another chance to fly. I've just received another motor and am currently waiting for a bit less windy day to have another go🙂👍 I am confident of your design based on the way it flew straight with the original foam board. In retrospect, I think I probably should have invested in the same material you used but it is fairly expensive in the UK. I'll try to remember to update you about the next attempt. Thanks for your interest Gary

@0garythebloke0 4 года назад

Well, I got another motor installed it and tried again. This time, plenty of power and it flew like a dream, but........ we flew it round a few times but it was a little short of throw on the ailerons and there was a hedge behind us it went over the hedge and lost sight and control and landed in a cornfield. Searched high and low but didn't want to trample the corn underfoot so I'm afraid it's awaiting the Combine harvester 😟😟 Still I'm undeterred and am going to build another out of the corrugated plastic as it's very strong and not withstanding operator error we will fly again👍👍

@Hakinank 4 года назад

@@0garythebloke0 Hope you find it very soon.

@0garythebloke0 4 года назад

@@Hakinank Thanks Hakan, I won't find it before the corn is harvested. I even flew over the area with a camera but didn't see it although the corn was shining white in the video so I guess the combine harvester will chew it up😣 Still I've got enough material to build another👍

@Rahul-oj9kq 3 года назад

Perhaps you should dedicate one video on operations, it will help for beginners like me :) anyways I am subscribing

@SanthoshMuruganantham 3 года назад

Your a great pilot

@omm14200 Год назад

First, i deeply admire you. Great work and content. Second: Why do you use brushed motors? Just to make it more challenging?

@Kendin-Yap Год назад

Thanks. This is a very simple and small model. Cheap controller, cheap motor, cheap esc is the target for this model airplane video. It wouldn't make sense to use the much more expensive brushless motor and esc.

@letzvisit1661 4 года назад

This is a fantastic build . I’m looking to get back into RC cars after many years off. Never flown a plane tho what’s the cost of a simple aircraft build?

@waxwyshow8943 3 года назад

I made my something around 60$

@dafuqdc24456 4 года назад

RU-vid de izlediğim en iyi şey

@joeearly7546 2 года назад

Shorter the wing the less control you need 1/4 on Ail. 3/8 on Ele.

@ИгорьПсарев-ы3и Год назад

Все гениальное просто))) а не подскажите что за материал применялся в постройте этого пепелаца?

@barrypenobscott9882 2 года назад

A longer wingspan might be helpful.

@tiranraz8071 3 года назад

Thanks for sharing all your amazing videos, have a question about plane rc with brushless motor, do you have any code for it

@Kendin-Yap 3 года назад

Thanks. Related video. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bD7rQbnSbek.html .. And the links are in the description.

@indianman4758 Год назад

It is really good 👌 please tell me where you bought from the controller circuit

@Kendin-Yap Год назад

I did not bought. I made it myself. There is a link below the video.

@indianman4758 Год назад

@@Kendin-Yap controller circuit and remote also you made your self ?

@Kendin-Yap Год назад

@@indianman4758 Yes. You can find the related video link below this video.

@kuljeetsingh9489 3 года назад

You are so cool

@ReglazeRX 4 года назад

10 years ago this was just a mere dream. Tech has really come a long way.

@mitropoulosilias 4 года назад

me too.. even 5 years ago only 1-2 guys did that and you had to pay for the code

@ReglazeRX 4 года назад

@@mitropoulosilias no doubt Remember when first person was fresh and expensive unavailable tech? Good times lol

@mustafahatay3028 4 года назад

tel verebilirim

@ReglazeRX 4 года назад

@@mustafahatay3028 what?

@cutefoxRC 4 года назад

@@mitropoulosilias now almost everyone can have drones, even people who are not much into RC stuff, and now goverments in many countries limit this hobby...

@ioannisgiogios9697 4 года назад

The dislikes must be from the Wright brothers family. Well done , great video..

@muradabdulkerim3230 4 года назад

😂😂😂👍

@adityakaprawan7391 4 года назад

😂😂😂

@artsandeep2597 4 года назад

🤣🤣🤣🤣🤣🖕🔥lol

@ArcanjoG700 4 года назад

the likes are from Santos Drummond familly HAHAH

@GameDatabase 4 года назад

Wright Brothers dislikes cause the aircraft dont use catapult....

@cryzz0n 2 года назад

It has never been easy to manoeuvre a model plane let alone a real one. Good job buddy ! 👍

@JandeBloois1952 4 года назад

I wonder what those 718 persons who did not like this ever have achieved, except being born. By mistake.

@mohammadyousef6374 4 года назад

probably because it was in turkish ??

@filipbozic4431 3 года назад

Chill

@OrhanGencebayDunyasfanpage 4 года назад

Basarilarinizin devamini diliyorum, berhudar olunuz 🖐️

@mucahitaskan95 2 года назад

sizde abicim. Seviliyorsun.

@challengereis6193 2 года назад

@@mucahitaskan95 abi ben bunun pilini goremedim

@alvinyusroalhijry 3 года назад

Thank you brother👍 i'am support you from Indonesia

@makinasyikaja3940 3 года назад

Orang mana

@uniquelyunique4301 3 года назад

@@makinasyikaja3940 kenapa anda mau tahu?

@syafwanas5107 3 года назад

Saya juga

@sahabataeromodellingindone86 3 года назад

Yess ada juga ni orang indo

@timeformusic8583 3 года назад

Bagus sudah pada ngumpul semua, yok saya antar pulang 😂😂

@alejandras4531 2 года назад

Hello @KendinYap I need your help please, I put the code in both arduino boards for the plane controller (I used arduino uno for the emitter and arduino nano for the receiver) when I connect everything, nothing works, I already verified that everything is well connected and everything is correct but it still doesn't work and I don't know why, what can I do?

@behlaburhani231 3 года назад

I need the templates

@HistoricalEventsShorts 4 года назад

Böyle TÜRK KANALI bulmak çok güzel bişi özelllikle bu youtube çöplüğünde çok ender bi kanalsın. Bu kanala abone olmayan da ne bilim yani 😂

@pokedandhockeycards3668 3 года назад

Ok?

@pokedandhockeycards3668 3 года назад

That language does not make any sense🤨

@chandrachacha4964 3 года назад

@@pokedandhockeycards3668 you just don’t understand it make sense for them

@beyonder3852 3 года назад

@@chandrachacha4964 exactly

@adnan1alim 4 года назад

I can't even cut a square piece of cardboard and he makes a plane in 10mins. FML

@pavletrnic1433 2 года назад

Probably not practical, but it must have been a great learning experience in the world of arduino and aerodynamics! Great video!

@___uday_hardhawk 11 месяцев назад

Will it really work means the diy transmitter

@suchy.chomik 7 месяцев назад

@@___uday_hardhawkyes

@Victor0 4 года назад

Amazing!! I'll try to try to make one of these with your steps.

@HM-wy6pt 4 года назад

Happened?

@AkariPs 4 года назад

Did you did it

@mikaelgodefroimont5788 4 года назад

Did it work

@Victor0 4 года назад

Not yet... Need to buy the stuff

@subanisohieb4746 4 года назад

indonesia

@vanthangpham7984 4 года назад

I have a question, How long can it fly? I think it can fly for 7 ,8 minutes

@farukyldrm8498 4 года назад

Öncelikle tebrik ederim. yorumlara biraz baktım şunu görüyorum Türkler gururlu youtube'a böyle bir katkıda bulunduğunuz için.

@johnoldman4152 2 года назад

Kanat means a Wing in Kazak language. We share the same origin. And a passion for flights.

@aniaiwasio2721 4 года назад

The hard controls are, in my eyes, just a programming problem. You should program it so that the plane increases the angle a bit slower, not immedately to full.

@alejandras4531 2 года назад

Merhaba @KendinYap yardımınıza ihtiyacım var lütfen, her iki arduino kartına da uçak kontrolcüsü için kodu koydum (verici için arduino uno ve alıcı için arduino nano kullandım) her şeyi bağladığımda hiçbir şey çalışmıyor, zaten her şeyin doğru olduğunu doğruladım. iyi bağlanmış ve her şey doğru ama yine de çalışmıyor ve nedenini bilmiyorum, ne yapabilirim?

@Kendin-Yap 2 года назад

Tüm bağlantıların doğru ve eksiksiz olduğundan çok emin olmayın. Defalarca kontrol edip hatayı gözden kaçırmak elektronik devrelerde en çok yaşadığımız şeydir. Bunun haricinde bağlantı kablolarını mümkün olduğunca kısa tutun. Mosi ve Miso kablolarının etrafına burgulu şekilde NRF modüle giden GND kablosunu sarmak da faydalı olabilir. Çünkü NRF modüller dış parazitlerden çok etkilenir. O şeklide kabloyu burgulu hale getirmek kısmen filtreleme sağlar. Ve NRF modüller voltaj konusunda hassastır. Onlara giden voltajın kararlı olması önemlidir. Özet olarak NRF modüller biraz fazla hassas modüllerdir.

@owenkegg5608 3 года назад

Watching this video at 1.25 speed is wonderful

@dennisthegrower 2 года назад

Thank you know can make a kamikaze drone. I am sending them to Ukraine to use in Moscow when they get there.

@gokalpcetin4763 4 года назад

Kaptan, öncelikle eline sağlık. birkaç minik not: Joysticklerin tepelerini cıkarıp biraz daha uzun cubuklar takarsan kumandadaki hassasiyetin artmış olur, ayrıca da kontrol horn larının daha kontrol yuzeyine yakın bir deliğini secersen push rod ları bağlamak için daha az hareket ettirebilirsin. Bunlar dışında güzel görünüyor toplam ağırlık biraz motorun gücüne göre fazla ama kötü değil uçurulabilir düzeyde. Tekrar elinize sağlık

@kenttucky 10 месяцев назад

get good

@sariphd8337 4 года назад

English : thats simple and cool bro. Indo : keren banget men. Javanese : suangar poll

@iceendra 4 года назад

Simple ndasmu wkwk

@muhammetusta4198 5 месяцев назад

Uçağı yaptım 2 kere denedim uçurdum fakat yere yapıştırdım pervane kırıldı 😂 pervane değiştirdikten sonra tekrar uçuraçagım

@gurjantsinghcheema5865 4 года назад

Sounds like a mosquito..

@ambroseoyamo7404 4 года назад

😂😂😂 yeah.

@iceberg789 4 года назад

d haviland mosquitoe.

@ernstmurling6684 4 года назад

Thank you for your great Project and your very good and perfect Video! In next cold Winterdays i will try to make it too!

@harunservice8376 3 года назад

Top amazing..👍👍 Greeting from indonesia

@tiagolopes6686 4 года назад

*_Amigo muito bom o video, mas você teria um video de como fazer um avião desses aí só que mais robusto , um pouco maior e mais pesado?_* _Friend very good the video, but would you have a video on how to make a plane like that but more robust, a little bigger and heavier? _ *

@Kendin-Yap 4 года назад

You can watch my other videos… ru-vid.com/show-UCgjJGE17yfovAvWUzEJFENAvideos

@tiagolopes6686 4 года назад

*_Obrigado amigo, like nos vídeos e já me inscrevi também, forte abraço e SUSSESSO no canal._* *_Thanks friend, like in the videos and I already signed up too, big hug and SUSSESS on the channel._*

@omarpervez6465 4 года назад

The feeling when it flies perfectly without any flaw...... I am also making a drone (Quadcopter) pray it flies properly 😂😂😂

@pokedandhockeycards3668 3 года назад

AWSOME!

@pokedandhockeycards3668 3 года назад

Good luck!

@sailikhithtirukkovaluri9006 11 дней назад

Bro!!! Awesome bro i am a big fan of your work and i like this very much love from India.

@joseluisescudero1084 3 года назад

Excelente con seguridad al final, !!! Felicitaciones maestro !!!!! Desde Buenos Aires Argentina Sudamerica cordiales saludos

@_Jason_dinAlt_ 4 года назад

Упустил самою малость - крыло не имеет подъемной силы. Сделай нормальное крыло и будет счастье!

@videoleaks 4 года назад

Как же эта модель по-твоему летит, если: "крыло не имеет подъемной силы", "мудрец аэродинамики"? 😀 Садись, двойка! 😆

@_Jason_dinAlt_ 4 года назад

@@videoleaks Модель не летит а носится постоянно кабрируя. Именно кабрирование и хорошая тяга не дают ей свалиться в пике. А если бы у крыла была подъемная сила то модель летела бы ровно и спокойно как все настоящие самолёты. Учите аэродинамику и принципы построения летательных аппаратов.

@_Jason_dinAlt_ 4 года назад

@@ИльяИлья-г2ю Начни с дельтаплана.

@AmbassadorOfLogic 4 года назад

@@videoleaks я не фига не понимаю в аэродинамике, но даже мне во время просмотра стало понятно, что крылья нестабильные и надо поработать над ними еще.

@ВасилийПетровский-з5и 4 года назад

@@_Jason_dinAlt_ точно! в этой плоскости лежит одна из проблем и-16...

@alpsakarya3054 4 года назад

Esc yerine mosfet kullanınca kodlar sorun çıkarıyor. Servolarda sıkıntı yok ancak motor sürekli olarak düşük devirde çalışıyor. Motor kodlarını nasıl değiştirmeliyim? yazılımdan pek anlamıyorum.

@yououtuber4176 4 года назад

You really nailed the controls at the end. Nice landing too.

@KING---9 4 года назад

@maestro.buddy. 2 месяца назад

😇Yeah, I have experience in radio control.😁😁😁😁

@teknocun8179 4 года назад

Kardeşim ellerine sağlık en sevdiğim dizi gibi izledim videonu ve haz aldım.Bir Türkün elinden böyle bir çalışma ve kanal çıkmasıda ayrıca gururlandırdı.Tamda arduino öğrenmeye hevesliyken kanalını bulmam çok iyi oldu.

@MusfataKocoglu 4 года назад

kaç metreye kadar uçuyor lütfen bilgi verirmisiniz

@bindokuzyuzonbir 4 года назад

100 metre falan

@KaanAlperKaraaslan 3 года назад

@@bindokuzyuzonbir 1000 metre

@xionnoix2984 3 года назад

The dislikes comes from people, who can’t distinguish between tumb up and tumb down 😉! That’s the only justification. And I give you 10^(10^1000000) 👍 Great Job!

@kinocchio 4 года назад

Well done 👍 Stick some leds and troll RU-vid with ufo videos.

@burakpola1 4 года назад

Başarılarınız devamını dilerim, inanılmaz bir kanal keşfettiğim için çok mutluyum.

@suleymankaya815 4 года назад

Abi ben 4-5 sene önce yani 7-8. Sınıfta bu tür maket uçak ve ornithopter yapiyordum motorlu kumandalı değil de lastikle uçuruyordum. O zamanlar böyle bir kanal yoktu sürekli yabancıların videolarını izleyip anlamaya çalıyordum şimdi sınava hazırlandığ için bu tür işlere pek vakit ayıramıyorum. Hayalim üçak mühendisliği okumak inşallah okur ve sizler gibi olurum ayrıca en büyük hayalimi gerçekleştirdiğiniz için de çok teşekkür ederim allaha emanet sağ salim kalın👍🏆

@Snuwjwnwjjw 4 года назад

Kendimi gördüm

@Rcplane_Turkey 4 года назад

umarım kazanırsın

@GameOnlin3 4 года назад

Kazanda ülkeye hayırlı birey ol. Roketsan aselsanda çalışta yardım et

@sezginmercankandemir.7132 3 года назад

Helal sana kardeşim bu tarz videolar da Türk izi görmek gururlandırıyor

@serkanayaz9563 4 года назад

DC 180 Motor 7.4V 39000Rpm Yüksek Devirli Elektrik Motoru hiçbir yerde bulamıyoruz. Bunun yerine hangi motorları kullanabilriz acaba?

@Kendin-Yap 4 года назад

Bunun alternatifi başka bir fırçalı motor bilmiyorum. Fırçasız olarak 1306 motor kullanılabilir.

@fakirbalina6434 4 года назад

Bu işi hobi olarak yapmak yerine ticarete döksen daha iyi olur 3d yazıcı ile kalıbı çıkarıp montajla beraber türk teknolojik oyuncak sektörüne ilk adımı atabilirsiniz

@mineboy077 4 года назад

3 boyunlu yazıcı ile basılan parçalar kullandıklarından daha ağır olur. bu yüzden uçmayabilir.

@taha112498 4 года назад

Ender Ersoy kardesim, bunu yapablar var zaten, ancak motorlari ve aküleri daha güclü. 3d printed rc plane yazarak bulabilirsin

@Serkanbah 4 года назад

@@taha112498 3d yazıcı yerine, yazıcı kalemle hafif ve güclü bir ucak yapılabilir bence.

@vinceeroldvillaber7372 4 года назад

Tata

@anacondajoe1491 4 года назад

bunu hazır kesilmiş parçalarla kit olarak satabilir aslında motor ve kontrol üniteleri ile birlikte. yetişkin yapbozu mis

@rahultej2248 4 года назад

Use the rudder So, the plane does not tilt while turning.

@antonio-gt 3 года назад

This plane doesn't have rudder

@aybarsceylan3306 3 года назад

Hocam merhaba, model çok güzel gözüküyor, yapmak istiyorum ama lehimleme aletim yok. Lehimlemeden yapılabilir mi?

@Kendin-Yap 3 года назад

Lehimlemeden elektronik devre ne yazık ki olmaz.

@anthonypirozzi837 4 года назад

Flew better than I expected... Much respect 👍

@VIJAYzk Год назад

he's a good pilot thats why he could fly with that horrible joysticks

@g3saif486 4 года назад

WOW... Amazing project 😍😍😍😍

@mucahitaskan95 2 года назад

Helal be valla cok güzel olmuş MaşAllah ellerine sağlık başarılarının devamını dilerim.

@stratos2 4 года назад

Very cool! finally not one of these cheap clickbait videos

@hemlatapaliwal7042 4 года назад

Superb engineering and it is also easy for students to build it

@ThirtytwoJ Год назад

A spring loaded trigger prob would be better for throttle. Tho just using old playstation parts is appealing.

@jlai9001 4 года назад

I love DIY. You inspire me.....and also make me feel incredibly stupid at the same time.

@tech_90 4 года назад

like.

@atomkarncalar7625 3 года назад

Eveeeeet yorumlar birleşmiş milletler toplantısı gibi 😂

@maryataaserwaa4276 Год назад

Thanks so much for the video .not so bad for my kids project work😊😊

@ryanli442 4 года назад

great build !! an impressive tutorial showing how-to with low cost materials !! 😍😍👍👍

@danieldegg1 4 года назад

Minus the controller.....

@iveusethisusername 4 года назад

I have that joystick sensor/module too, the resistance sensor value is not linear, the analog value is not that good to control things like airplane piloting. I understand your struggle

@johnnyjxdthegod2655 10 месяцев назад

Awesome tutorial, even though I haven’t tried it.. IT WAS COOL! but anyways, if I do try this, I may show it to my robotics teacher lol 👇

@tm-acid4681 4 года назад

Now that's the plane which i was searching

@eshaanthakur 4 года назад

20 seconds after my first flight the neighbors called an ambulance

@eshaanrao9747 4 года назад

🤣🤣🤣🤣

@ubaidmalik7372 4 года назад

Why

@emirkaplan7384 3 года назад

5v yani direk arduino çıkışına bağlayıp yapma şansımız varmı ? veya ona uygun bir motor varmı ?

@Kendin-Yap 3 года назад

Arduinonun çıkışı o kadar akım sağlayamaz. Direk motor bağlanması uygun değil.

@icevld 4 года назад

Why do many dislikes? Very good video, thank you author!

@linikeralmeida3226 4 года назад

Great video and project. I'm not an expert, but I think you can use (make one, If Its not avaiable) in the arduino code an exponential function to solve the precision problem of the controler.

@RCaeroDepron 2 года назад

sympa tes vidéos j ai moi aussi une chaine de construction d avion en Depron que je viens de lancer j adore aéromodélisme

@bernieshort6311 2 года назад

Outstanding really, low cost and easy build, just what one needs to enable one to get into model flying to see if it is a suitable hobby for you.

@Beastiie7 4 года назад

Cool project! Glad that's not the way airline fly 09:37

@merakshot9277 11 месяцев назад

i added you to my playlist o Arduino Projects 🎉 i will try that bro. thanks 🙏

@achlasharma5764 4 года назад

U v earned my respect sir!

@ahyonvlogs 4 года назад

Thats so cool!!! Tiny Motor so powerfull

@jackjuhasz533 7 месяцев назад

I'm curious about the weight of the kraft foam board. I've weighed several different brands with weights ranging from 3 oz to 9 oz.

@Kendin-Yap 7 месяцев назад

The ones I use (50x70 cm | 5mm thickness) weigh 145 g (5.11 oz).

@СаняДжуган 4 года назад

can I use a brushless motor instead of a collector motor

@garrettsteele8478 4 года назад

Yes

@altuneli 4 года назад

Üstadım çok güzel iş çıkarmışsınız izlerken yapıyormuş gibi hissettim. Yapımdaki ve deneme safhalarındaki açıklamalar çok iyiydi. Videoyu izlemem yetti abone olmak için. Sabırsızlıkla diğer videolarınıza bakacağım. :)

@Sudalssam Год назад

Wow,great!!! I pushed subscribe&like ~❤

@6ev 4 года назад

я один от звука мотора стал чесаться и смотреть по сторонам? частота пищания комара или где-то рядом.

@holdfastification 4 года назад

Да, братан, ты один. Я без звука, под одеялом смотрел, что бы жена не услышала)

@cvrseho3277 4 года назад

GTA SA - RC Mission

@anirbanghosh9745 4 года назад

That's the most fucked up mission in the history of mankind

@opkaigaming9210 4 года назад

@@anirbanghosh9745 its actually very easy

@Teorisma 4 года назад

@@opkaigaming9210 easy is for ps player, ps player is not actual real player. play in pc with mouse and keyword and see how is easy you moron!

@Mr_Fancypants 4 года назад

People complaining and meming about the train but these were the real dark souls.

@ren.0day 3 года назад

@@Teorisma i did it first try on keyboard and mouse. PlayStation timing and keyboard and mouse timing for are the same

@DELay99 2 года назад

Вирусня)) Начал смотреть, и не смог не досмотреть до конца

@ndagijimana 10 месяцев назад

Woooo this is a great video and great landing too!!

@maestro.buddy. 2 месяца назад

Yes, the video is interesting.

@remigiuszdarmach4233 4 года назад

Internet: Best tech guys is Hindi! This guy: Hold my ayran!

@smoreno5532 4 года назад

Hold my lahmacun

@oyungelistirme 4 года назад

Hold my döner

@MakerFabio 2 года назад

you are the king of the hot glue! subscribed. are those builds lasting or they are just for couple of runs and then the glue detach?

@Kendin-Yap 2 года назад

Hot glue is long lasting when applied in the right conditions. A suitable hot glue gun (25-30 watts) and quality hot glue material should be used.

@iwantriharjanto4288 4 года назад

I must admit this is a great job.

@ricardorsantana7652 4 года назад

Eu pensei que não iria voar, mais decolou e decolou muito bem. Parabéns!

@maestro.buddy. 2 месяца назад

I am happy for this take off.

@bkgambleryt5936 4 года назад

Is it work with advance coreless motor 20×08mm 510000 RPM 3.7v

@Kendin-Yap 4 года назад

No it is

@Luiz-yu6pt 3 года назад

Vixi que legal ficou,parabéns.

@rauldeobaldia8276 3 года назад

Waoo, that was a realy great job.

@albertodtohan8432 3 года назад

Wowwwww amazing👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👈🏻👈🏻👈🏻👈🏻👈🏻👈🏻👈🏻👈🏻👈🏻👈🏻👈🏻👈🏻👈🏻👈🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻

@champikagunasekara9229 3 года назад

amazing brooo !!!!!

@arelectronicrepairinglab5262 4 года назад

Good joob bro

@Za_pobedu_ Год назад

Убавь расходы по элеронами и всё будет 👌

@ВладимирМакарчук-д5у 4 года назад

Спасибо за видео, как всегда понятная сборка и отличный результат.