Hello, I also made this project, the horizontal is mg996r(360 degrees) and the vertical one is sg90(180 degrees). My problem is that both servo motors won't listen to the code, and they're continuous rotating. May you advice me to make them work?
I follow your video for making dual axis solar panel , So our issue is can I used in this project Servo motor futaba s3003 used in place of MG996R. Can Servo motor futaba s3003 used in this project.
Yes you can but make sure you need constant 5 v from solar panel, the best idea to charge you battery using solar power then use the battery power to arduino
Sir , I am making this project . I need a ppt about it. sir can I get the working principle of it? please help 🙏. I have another question , I have to give the 5v supply, both Through USB and 5v/gnd pin of UNO or through any one of them? Please help I am gonna buy all products tomorrow.
What is the material called I can't find anything with the name of PVC cardboard online. It will be really helpful if you could share some link or local name that I must tell to the shopkeeper.
All the motors +tive connect together and all the -tive of motors connect together , and then connect motors +tive wire to external power 5v and same for -tive
Code needs Hysteresis added so it doesnt constantly run the servos . If your running this system off the solar system it will waste energy constantly seeking like its doing .
Thanks. Horizontal servo was not rotating, but after giving external supply problem solved. Thank again.🙏 Is there any way to make it stable? Bcz even after fixing light position it slightly moving back n forth.
@@splendor10 What is the material called I can't find anything with the name of PVC cardboard online. It will be really helpful if you could share some link or local name that I must tell to the shopkeeper.
And I noticed that it is unstable, as if trying to find the position with maximum light. If that cross separating the sensors were black, maybe the problem would be solved. There is another thing that I notice in most of these projects .... they are not tested in sunlight but with the help of a concentrated flashlight. This leads me to believe that many of the projects are not functional in the real world.
@@gelu8312 it can be work on sunlight, for this you need to built big separator, means these separator use in between the ldr sensor, and change the map values