No video :(

How to Make Stair LED Lighting with Motion Sensors

Подписаться 89 тыс.

Просмотров 766 тыс.

50% 1

And here you can see how we can turn on and off a light bulb from two or more locations , without wires • How To Wire , Setup a ...
Here you can see the products which i used in this video
PIR infrared Motion Sensor
AliExpress:goo.gl/mSFpXf
Led Step Lamp stairway
AliExpress:goo.gl/SVBuKu
And here you can see how we can turn on and off a light bulb from two or more locations , without wires • How To Wire , Setup a ...
See my blog :diy-tipstricks...
In this video I will show you how to make connections to a stairway lighting system with motion sensors
If you are unsure, please contact an electrician to make these connections
Thanks for watching . And do not forget, Like and Subscribe
Due to factors beyond the control of DIY Tips&Tricks, it can not guarantee against unauthorized modifications of this information or improper use of this information. DIY Tips&Tricks assumes no liability for property damage or damage incurred as a result of any of the information contained in this video. DIY Tips&Tricks recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of DIY Tips&Tricks, no information contained in this video will create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from the improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not DIY Tips&Tricks.
How it Begins by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommon...)
Source: incompetech.com...
Artist: incompetech.com/

Опубликовано:

1 авг 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 105

@thelazycat_ 3 года назад

That are some big sensors. I keep looking, thanks for showing

@royurick 3 года назад

Thank you! This is a perfect design. My sensors arrived today and I cant wait to setup my stair lights.

@bestlordbestlord4753 2 года назад

Good evening friend, please help me out, what is the name of object to was angl side, the connection by the right

@stevenls9781 4 года назад

This is exactly what I need but in Australia the cabling is different.. we have three cables for power and the sensors I have found have Active, Neutral and Load.. which I can see with this video also - just not sure how this related back to 240V for Australia? plus I was thinking of doing this with strip lighting and they only have + and -.

@janjuag Год назад

Great project. I have a question. When somebody walk up or down, in start first nearby sensor will trigger the light and when he will reach to other end then other sensor will trigger the light. So if delay is 10 secont then it will start after second trigger?

@CMCdiy Год назад

Hi, Motion sensors are adjusted. you can adjust the ignition time as well as the sensitivity. Yes, if it reaches the top, they light up again and vice versa

@EMMADIY 6 лет назад

Very useful video! Thumbs up for sure👍

@CMCdiy 6 лет назад

Thanks Emma !

@danielt.6076 4 года назад

Nice Video abd generally current is color blind... But nevertheless there are unified color standards for electric installations... mixing black and blue is critical. Blue (N) wire should never be connected to L!

@lucafelix 4 года назад

This is true!

@winstonmontgomery8211 3 года назад

If I have a motion sensor switch at the top and bottom of my stairs, what happens if I trigger the bottom sensor and then quickly trigger the motion sensor at the top of the stairs. Will it turn the light off or will it stay on.

@roydjoengkel3005 4 года назад

nice topic my friend,. Is it possible to extened with 3x more P.I.R. on same flowsheet for the 2th and 3th floor

@4wdfocus 6 лет назад

Hello nice to meet you my friend 💡💡💡💡💡💡💡😘😘😘😘😘😘😘

@marcopolo2159 5 лет назад

Thanks for your help.

@seba2703ful 3 года назад

hello great tutorial. I have a question, is something else, e.g. arduino needed for this connection? are these motion sensors and LEDs enough for proper functioning?

@royurick 2 года назад

Yes. Is FAR more reliable than AI. The more simple, the more reliable. I did this and actually skipped the motion sensor because I would have false positives and the stairs would light up when somebody walked down the hall at the top of the stairs. Or I would have to mask the sensor with tape so that the first step would have to be blind into the darkness before the sensor picked up the person walking down the stairs. Instead I put the lights on a timer. They are always on from dusk to dawn. And they are dimmed LEDs, so the electricity cost is minimal.

@classicsmarthometechnology1218 2 года назад

well explanation. 👍

@MaxMoviesxxx 4 года назад

Can I use One way pir Motion sensor which only have red Wire in and out , To connect two sensor with led bulbs on stairs... Just like you did...

@harryl7946 2 года назад

Sooooo, when the sensors since a light source the LED’s turn on? Are we to reverse the leads so that the LED’s turn ‘on’ when a light source is absent? 🧐 Asking for a ‘friend’.

@moondiver8652 6 лет назад

very good job 👍

@CMCdiy 6 лет назад

thanks man,

@MsShrikant 5 лет назад

Very very useful video 👌

@ahelectric6481 3 года назад

Good work

@selectrical7682 3 года назад

Great job

@Engineerboy100 5 лет назад

Great job on this video, thank you!

@CMCdiy 5 лет назад

Thank You Clint Hightower😉

@hooghlydistrictsettlementc3861 5 лет назад

tell me the price of pir module and where it available ? pls help

@kh.kompot8634 4 года назад

good video បង្រៀន

@Youtubesundar 3 года назад

Excellent

@Maxton986 4 года назад

N(neutral)-BLUE wires -in the most parten of the world :)

@Indian-gn7tz 3 года назад

Blue or black colour using

@sammy2888 5 лет назад

Hi Sir , i just bought a 15w ceiling down light with a driver , i want to attach a sensor to this light , for the connection of the sensor device , do i need to connect the 220v power before the driver or after the driver to the led circuit.. yr advice please tks

@CMCdiy 5 лет назад

Hi Sammy, the sensor connects before the driver.

@sammy2888 5 лет назад

Hi ,tks a lot for the valuable info

@islamicchannelswabi8302 3 года назад

Nice 👍👌

@CMCdiy 3 года назад

Thanks 😊

@publicunion880 4 года назад

Very nice

@marcopolo2159 5 лет назад

Can you please tell me what is the time of sensor on the light.duration 10 second or more.

@CMCdiy 5 лет назад

Hi, Marco The minimum is 10 sec the maximum is 7 min

@kidscolorsheaven3469 6 лет назад

wow! super idea my friend.

@rai3r 6 лет назад

wow amazing bro!

@aruloli007 3 года назад

Thanks bro

@CMCdiy 3 года назад

Any time

@gearman4111 6 лет назад

awesome video

@kismetelektrik-samsun2285 3 года назад

Hiç gerek yok kendinden bağımsız kendinden sensör olanları var ;)

@jayantabajare3528 4 года назад

Classic video

@rajvaghadiya8814 3 года назад

But where are the motion sensors kept on wall or before starting of staircase and last

@kingnagasai391 Год назад

How can I buy this lights

@onlyeating3755 4 года назад

Nice bro

@raihannewaz125 4 года назад

Awesome content you deserve more subscriber

@CMCdiy 4 года назад

Oh thank you

@karthikperiyasamy2299 4 года назад

Hi..I ve requirement for 28 steps..need light on every step lights ON when I every step move on..then it lights OFF..in delay seconds

@FikiFirmansyah 4 года назад

NWS pliers 😍

@ShibainuKojiro 6 лет назад

Nice video, Like😊How to Make👈Wonderful. New friend🔔👌🙋

@pareshpanchal91 5 лет назад

What happens if both pir's are enabled at the same time? Will it short?

@mostafapachachi8025 5 лет назад

no .... sensors act like two way switch

@khanafridi5680 Год назад

Iron box or light price

@karuppasamyas7014 5 лет назад

Have where this the available ,please response here

@piyush_mohanti22 4 года назад

Flipkart

@dilipram1329 4 года назад

Nice video sir

@sksamirsksamir3677 4 года назад

Nyc sir

@heritiermutaza1590 2 года назад

Bonjour les ingénieurs je voulait automatisé l'éclairage progressif des cages d'escaliers l'aide de arduino uno ,le détecteur mouvementet le capteur a l'ultrason que faire svp?

@marcopolo2159 5 лет назад

Excellent 👌👍

@CMCdiy 5 лет назад

Thenk you Marcopolo,

@GearM 6 лет назад

nice video

@safebhuiyan4591 4 года назад

Nice Job

@safebhuiyan4591 4 года назад

Nice Job

@MultiKlompen 6 лет назад

Nico work, but DONT twist the wires! Use ?connecting clamps? (i dont know the english word) like "Wago".

@CMCdiy 6 лет назад

Thanks!

@royurick 3 года назад

Be careful. My electrician said he has seen failures of the wago and other push connectors. The spring steel is not reliable and sometimes fails over time. He refuses to use anything but the traditional wire nuts like this.

@kingnagasai391 Год назад

Tell me the web site bro

@CMCdiy Год назад

Hi. you can find their products in the description. a good day

@hamzagarmaje7898 3 года назад

Looking for work, I couldn't find a better way to talk to you. I work in the field of electricity for homes

@olahansen 3 года назад

Don’t give up your day job!

@fabiodigiacomantonio8331 3 года назад

can you list the psrts

@sangeetadevi9505 3 года назад

Sir can you give digram and products name

@theblackoutcaferestaurant9647 4 года назад

Cost this product

@Jaysmiracle 4 года назад

If u share the circuit diagram it wil be more useful

@khakicam5400 3 года назад

Try Google not RU-vid if that's what you're after

@waynewayoaveyard9397 6 лет назад

what does A mean in the drewing

@pareshpanchal91 5 лет назад

Switched live as the pir is 3-wire

@auntieerang6341 4 года назад

How to order this and how much

@CMCdiy 4 года назад

Hi Rina In the description you can find the products

@alizohaib6853 3 года назад

I Want this

@unirainbow396 6 лет назад

❤️L❤️I❤️K❤️E❤️

@CMCdiy 6 лет назад

Thanks Uni Rainbow

@dr.rkkushwaha453 5 лет назад

I want installation man

@Make_money99 2 года назад

Ham led 24 cala skthe ha

@eriwidianto8215 2 года назад

In indonesia dubbing please ya robby

@sksamirsksamir3677 4 года назад

Flipkart link share karo

@iuhere 4 года назад

Unnecessarily elongated video, could be easily compressed to 50% watchtime, so disliked , btw project itself is good but the video made is not upto the mark. Good luck for next one.

@khakicam5400 3 года назад

Unnecessarily elongated comment and way of obtaining information. Google diagram next time so you don't need to shit on other people's effort.

@sksamirsksamir3677 4 года назад

Hiiii

@h_creation619 5 лет назад

but in this when someone is not in there to senses the light r on its waste of energy

@h_creation619 5 лет назад

when i have to close the light i have to put something in the path of senser

@dijitalhasan 4 года назад

OLED..Button menü 0-60 chanal codes ://ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Scive-zl4Po.html

@MatSmithLondon 5 лет назад

So wait, you can't even show it working without those PIR caps? Let alone set up in a stairway? Yeh - no this won't work. Multiple PIRs won't work, they will not be triggered in succession, most will trigger at the same time, this is useless...