No video :(

how to make sticker sheets ❀ procreate and cricut full page print and cut hack ❀ beginner friendly

Подписаться 1 тыс.

Просмотров 35 тыс.

50% 1

Not really a studio vlog this week, more of a tutorial. I hope it can be of some help! And no worries, my normal studio vlogs will be back next week, just in case tutorials aren’t your jam ♥︎
❀ Online Labels’ Cricut Cut Settings Guide ❀
www.onlinelabe...
❀ Timestamps ❀
0:00 intro
4:03 making your sticker and saving it
5:21 resizing stickers on mac
7:20 full page cricut hack file setup
9:25 making the sticker sheet background guides
12:05 easy white outline around stickers trick
16:22 exporting the finished sticker sheets
19:00 making the tape guide for the full page cricut hack
25:44 printing out the sticker sheet
27:35 uploading the cut file to cricut
31:06 cutting out the stickers
34:42 the outcome!
❀ etsy store ❀ www.etsy.com/shop/awildfaun
❀ website ❀ www.awildfaun.com
❀ insta ❀ awildfaun
❀ music ❀
- Anew ~ Hara Noda
- From Sunrise to Sunset ~ Matt Large
- Overwing ~ Jobii
- Heart Street ~ Jobii
- Lights Ahead ~ Hara Noda
- Fly Shroom ~ Giants’ Nest
- Coffee and Unicorns ~ Henyao
- Tiny Things ~Giants’ Nest
- Sunny Stockholm ~ La Boucle
- Ocean View ~ Gregory David
- Saturday Coffee ~ William Claeson
- Berk Jam ~ Jobii
(all from epidemic sound)

Опубликовано:

17 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 115

@shayshayxox929 2 года назад

I just recently purchased my Cricut and my goodness this is the most thorough and easy to understand tutorial I’ve seen, thank you!!!

@awildfaun133 2 года назад

Yay! I’m so happy I could help! Have fun with your cricut :)

@mariajosemansilla9651 2 года назад

Thank you so much for this! It's been so hard to find a tutorial on kiss cut stickers without using Photoshop 🙏🏼

@awildfaun133 2 года назад

You’re so welcome!

@creative_panda_system2852 2 года назад

About time I found someone who made this simple! Thank you sooooooo much I literally have been trying to figure this out without flopping back and forward into in photoshop. Also love the outline tutorial!!! 🥰🥰🥰🥰 Your awesome!

@awildfaun133 2 года назад

Thank you so much!!! I'm so happy I was able to explain it clearly :)

@prettypinkcontroller Год назад

Hi I have a tip for the outline so that you don't need to duplicate it a bunch x) Duplicate your drawing you want the outline on, hold two fingers on the duplicated drawing and it will automatically select it for you, press color fill at the bottom and make sure its the color you want your outline to be, tap feather and choose the % you want your stroke size to be, press the selection button at the top so it lets go of the layer and then press it again, press automatic and with color fill still activated press on your drawing and slide your finger to make it more opaque! If your drawing has multiple things in it you can tap on each of them and make them all different or all the same :) I hope that makes it a little easier for you! ♥

@Sooz-gh7fb 2 года назад

Thank you so much. I subscribed purely on the fact that you watered your 'little one' / plant and turned it around to have more sunshine...aww 👏👌. I then continued watching the video and I will revisit making my sticker sheet again. It was a bit of a disaster yesterday but I'm not giving up. Your video is much better than the other video I'd watched on a different channel x

@mrs.quills7061 Год назад

This was super helpful, thank you for sharing the tape trick again I’ve seen others do it, but didn’t understand it. You’re also super pleasant to listen to and learn from so thank you. You’ve earned a new subscriber!

@lilliannatalzia1360 2 года назад

Best sticker set up I’ve seen yet, terrific job!

@DeniseLitchfield 3 года назад

Thank you so much! This was the clearest most easily understandable way to work with different size papers - in Australia we have different sizes and it was doing my head in!

@awildfaun133 3 года назад

You’re so welcome! I’m happy I could help!

@abigailemmertart Год назад

This was so amazing! I've been going crazy with the waste of paper that the Cricut leaves in its wake. Thank you! I actually found this video looking for how to make sticker sheets with procreate and now I learned 2 new things! Thank you.

@awildfaun133 Год назад

So happy I could help! The waste of paper was driving me crazy too

@lilyalberta4255 3 года назад

I like how 2 year ago (without my jump into small business RU-vid videos) I would have no clue what going on. But know it like unlocking your phone without looking at the screen. I really enjoyed these type of vidoe because they go in-depth about the process and use up to date hacks. Also, I'm living the earth day stickers

@awildfaun133 3 года назад

I love how RU-vid has a niche for small businesses to share :) I’m happy you like the stickers!

@XStephandOliviaX 3 года назад

what beautiful stickers! Lovely colours! 💚👐💜

@awildfaun133 3 года назад

Thank you so much!

@GalaLatynskaja 2 года назад

This is actually incredibly helpful! I hated that waste of paper when you do regular print&cut. Going to try it myself now 😍

@awildfaun133 Год назад

I'm so glad! I hope it works for you!

@kimdeuel 6 месяцев назад

Enjoyed the tutorial. That said, I get to start all over and try again. I printed everything but didn't have the option to put the sheet to print at 100% so I turned on borderless instead. Figured I would try it both ways. When I got to the Cricut part, I realized my png was created at 8x11 instead of 8.5 x 11. Sure enough, that messed everything up. Back to the drawing board (Procreate)!

@mary-ud2wp 11 месяцев назад

So helpful!!

@rebecasable713 2 года назад

Excellent video! I’ve been searching this information

@bokuwamouser Год назад

I’M SO HAPPY THAT I CAME ACROSS YOUR VIDEO!!! You explained everything so well and I’m so happy that this is really easy to replicate :,)

@awildfaun133 Год назад

I’m so glad it was helpful!!!

@bokuwamouser Год назад

@@awildfaun133i spoke too soon :,,))) i am having a problem with the machine cutting the stickers incorrectly. recalibrated once with the Print & Cut calibration but it wasn’t off-set during the calibration. what’s strange is that the machine is cutting the corner squares correctly in the corners (i even did a square in each corner.) i also tried attaching my sticker cut to an 8.5x11 rectangle to keep it all aligned but it still didn’t work :(

@awildfaun133 Год назад

@@bokuwamouser that’s so strange :( I’m sorry it’s not working. It’s funny that the corners are cut correctly but the stickers aren’t. I’m wondering if maybe it’s your printer that’s off then. When you print is your original file 8.5x11? And is it printing at 100% scale?

@bokuwamouser Год назад

@@awildfaun133 yep :( 8.5” x 11” and 100% scale, literally everything you did in the video. Whenever i do the regular print and cut like normal on design space, they come out perfectly. when they cut, it’s almost as if design space is warping it a bit because it looks like each cut sticker is off in a completely different way than each other..? like it will get really close to what i want for the first few cuts of the paper, but then each sticker afterwards is more off

@amandahays08 5 месяцев назад

Thank you so much ❤

@TiffanyLouann 3 года назад

The Earth day print you did looked soooooooooo beautiful! You are so talented! Also, you are one beautiful human as well! 😊❤😍 (I don't mean the heart eyes in a creepy way)

@awildfaun133 3 года назад

Ahhhh you’re so sweet! 😳 Thank you so so much! ❤️

@TiffanyLouann 3 года назад

@@awildfaun133 you're welcome!

@itskemy5872 2 года назад

Earth day is the same day as my birthday :)

@rosanna7481 2 года назад

Thank you for sharing this. Useful information and answered some questions for me.

@awildfaun133 2 года назад

You’re welcome! I’m happy I could help 😊

@bambisalazar1559 3 года назад

So detailed tutorial and thanks for sharing 😍

@awildfaun133 3 года назад

You’re welcome!!

@theresedignard4267 2 года назад

Thanks for sharing. Great tips.

@frontlinefandom5960 3 года назад

Excellent tutorial! Thanks so much 🥰

@awildfaun133 3 года назад

You’re very welcome! Happy to help ☺️

@PlanningWithK Год назад

Hi, I just found your channel, I am so excited to follow along but I am new to procreate and it’s hard to follow. Do you have a video for beginners? 😊

@christinegeene 2 года назад

Thank you so much! I learned a lot! I’ve been trying to find a video on how to make sticker sheets without using photoshop since I don’t have that software. So thank you thank you! 🤍

@awildfaun133 2 года назад

You’re welcome! I’m so happy I could help 😊 Have fun creating!!

@ceceyangg 2 года назад

So pretty!!!

@awildfaun133 2 года назад

Thank you! 😊

@sanpls 2 года назад

Cute stickers

@swirlinyx Год назад

This is a great video! I don't have a Mac or Photoshop, do you know what I could use to resize my images for sticker sheets without getting the blur/pixelation I get resizing on Procreate? Thank you!

@Kiefmonster 2 года назад

Im having issues when i print its just printing off the page... Its really frustrating as im trying every possible thing to fix and its just not working.. I print on uk a4 and all the sizing is right on my print files and when i print its cropping my file.

@janellacarmengomez7769 Год назад

Tried this and it sadly didnt work for me 😞 im using photoshop to edit the files, initially used it to print and made sure all sizes are correct, I even tried to print it first and create another cut file base on the sizes of the printed sticker but it still doesnt cut in line, sometimes it will cut too big, sometimes it will cut really out of the line. Tried to print it outside photoshop, still a no :( too bad. This tutorial is very detailed and she's also good at demonstrating and explaining. At this point I'm not sure anymore if the problem is my printer or my cricut or the software I am using to print the sticker. I really want to maximize the whole page but I guess I dont have a choice this time but to print and cut just directly throught design space 💔 I hope cricut will soon allow the full page cutting.

@polovw89 Год назад

Apparently my Cricut decided to start shifting the cuts upwards by 3mm, searched everywhere and found its an issue which cricut is aware about and labels it as "tolerance limit" which is bad as the sheet after being cut halfway starts to cut badly.

@thenatnatboy Год назад

is that the cricut maker 3?

@margievanhandel259 2 года назад

I really enjoyed this tut since I dont use photoshop or illustrator. The only thing that confused me was the need to tape a guide on the mat.... Thanks

@awildfaun133 2 года назад

The reason you need a tape guide is because whenever you use cricut to cut out any shape, it will offset it from the 0,0 position of the mat by about 0.25 inches or so? It does that to give a bit of a border so it doesn’t cut too close to the edge of your paper. So the tape guide is to avoid that border and be able to align your paper correctly. I hope that helps!

@Sooz-gh7fb 2 года назад

Ps, Can you just use the ‘offset’ function on Cricut (to make the white border)? x

@Sooz-gh7fb 2 года назад

Ps, Is that a Dicentra / Bleeding Heart flower on your sticker sheet? It's one of my favourites. Mine lasted many years but it must have died off. I need to buy another one 💕 x

@ashleylim5703 3 года назад

Hi thanks for the video, unless I missed it I just want to clarify: do I have to redo the tape step everytime I want to use this full page hack or I can leave the tape on the mat? And the next time I do it again I just load this tape mat and press cut? Thanks a lot !

@awildfaun133 3 года назад

You can definitely leave the tape on the mat :) no need to redo the tape step. I have some mats that I keep the tape on for this hack and another one empty just in case I want to cut something out normally

@danielaveselinova1737 Год назад

What is your sticker paper size? Because I have a gap when I cut the border of the pad, it is wider and narrower than the sheet.

@awildfaun133 Год назад

It’s just 8.5 inches by 11 inches. If your sticker paper is cut slightly off then maybe just tweak the size of the tape guideline that you cut to match it. Although mine has maybe a millimeter sized gap widthwise and I’ve never had a huge problem of the stickers being cut wonky.

@LucyMonsterrr 3 года назад

Thanks so much for this video, so helpful! It Answered so many questions of mine! :) I'm currently trying to source some recycled sticker paper, would you recommend this one that you're using in the video? x

@awildfaun133 3 года назад

I’m so happy it was helpful! I would recommend this sticker paper. It’s onlinelabel’s OL177RX recycled white. It’s just like a normal sticker paper, not like vinyl so it’s not waterproof, just FYI. It’s got a very slight speckled appearance which I really enjoy and I had no problems with print or color quality when using it :)

@antjemaraikeweber2085 2 года назад

Hi, why the Printer don't print the little black scares? My Printer print 4mm from all sides when I make it to 100%.

@awildfaun133 2 года назад

As long as the scale is set to 100%, I don’t think it matters if your printer can print borderless or not (aka print the little squares or not). The scaling is just to make sure that if for example you made a 1inch sticker in procreate, then when printed it’ll still be 1inch. I hope this makes sense. Procreate has a grid feature that I’ve used to measure the actual size of my stickers to make sure they’re printed true to size when I set the print scale to 100%. Let me know if that helped!

@BAESDART 2 года назад

I cannot get the window to pop up that shows the scale for printing. I’m on pc, is that just a Mac thing?

@awildfaun133 2 года назад

Hmmm is there a preferences or page setup button that might have it when you go to print?

@Ive222 3 года назад

Beautiful illustrations 🥰. Do you have a link for the paper trimmer you use? I need to replace my fiskars trimmer

@awildfaun133 3 года назад

Thank you so much! Here’s the link! www.amazon.com/X-ACTO-Commercial-Square-Guillotine-Trimmer/dp/B002JGMIA8/ref=mp_s_a_1_40?dchild=1&gclid=Cj0KCQjwh_eFBhDZARIsALHjIKf-bHIhu9Y3gKtJQn5XXRJOuSJ7SeCZXAymnIVoXQClNg96P0K4SAcaAstIEALw_wcB&hvadid=459581815610&hvdev=m&hvlocphy=9007055&hvnetw=g&hvqmt=b&hvrand=11210578791884873754&hvtargid=kwd-314535315542&hydadcr=14290_10020906&keywords=paper+cutter+a2&qid=1623103142&sr=8-40 Here’s the name of the paper cutter just incase the link doesn’t work: X-ACTO Paper Cutter Guillotine | Commercial Grade Guillotine Paper Cutter, Heavy Duty, Square (15x15)

@Ive222 3 года назад

@@awildfaun133 Thank you! Do you have an etsy shop link or website? Id love to support

@awildfaun133 3 года назад

@@Ive222 You’re so sweet! ❤️ I do have an Etsy store! Here’s the link: www.etsy.com/shop/awildfaun

@theprocrastinatingphd.956 2 года назад

This was incredibly helpful. I really don't like the thick registration border that you get when you do print and cut through Design Space. Thank you.

@awildfaun133 2 года назад

You're welcome! I was annoyed with the thick borders too. It felt like such a waste

@janiceejz 2 года назад

thank you for this trick! I did exactly as followed, lining with painter's tape and cutting out a 8.5x11 shape. However when it cuts a sheet of stickers, I can still see that there's some misalignment due to uneven white borders around the artwork. Something just seems off. Would running print then cut calibration help at all in this case? I've been struggling for so long now trying to get even white borders around my stickers. I would so appreciate any help, thank you!

@awildfaun133 2 года назад

I think running the print and cut calibration would help! I remember having my outlines be a little off before but recalibrating it’s seemed to help. Good luck! And let me know if that helps :)

@janiceejz 2 года назад

@@awildfaun133 thank you! i recalibrated and it did improve the alignment!

@awildfaun133 2 года назад

@@janiceejz wonderful! I’m happy that helped :)

@itschelli983 2 года назад

I did everything you said, but it’s not cutting at all correctly. I calibrated my maker last week. Maybe I should do it again? Anyhow, this was amazing and that you for doing it step by step. I definitely stuck till the end you deserve it!

@awildfaun133 2 года назад

Aww I wish I could have helped more. Please let me know if you have any questions if you try again. Thank you for sticking to the end!

@shannonroberts7242 2 года назад

I see. Thanks! Did you know they have an “offset” feature in Design space to add outlines to images? Like for making stickers and things.😌

@awildfaun133 2 года назад

I didn’t know that! Have you tried it yet? I’m interested to see how well it works

@shannonroberts7242 2 года назад

I just tried as we speak. I tried it on paper first to see if it would cut out on the outline. It did good! They had this feature for about a year or so. People were asking for it apparently. Only thing I’m finding is that it works with the print and cut feature in design space I haven’t tried it yet with 8.5x 11 paper. But I uploaded my images from procreate and added the “offset” feature to them. Google or RU-vid “offset in design space” to get more details. 😌

@awildfaun133 2 года назад

@@shannonroberts7242 thank you so much for letting me know! 😊 I hope it works with the full page hack too

@shannonroberts7242 2 года назад

Your welcome! If you figure out how it would work for hack let me know to. I let you know as well if I figure it out.😌

@awildfaun133 2 года назад

@@shannonroberts7242 sounds good!

@haileyromo8097 2 года назад

Is there another way to do this without having to draw your own stickers?

@ktann 3 года назад

Hi! Help! For a Kiss Cut Sticker sheet with a backing card - I can only seem to get my outline cut out when I have a white backing card (yes saved as a png) and i’ve tried the hack of duplicating the backing card to make that fully cut out but it doesn’t even register to kiss cut the actual stickers whenever i have a backing card…any thoughts on what i’m doing wrong?

@awildfaun133 3 года назад

Hmmm I haven’t tried having the cricut cut a backing card on kiss cut stickers before so I’ll do my best to help. My best idea is to have two different cut files on the same cricut project, one being the backing card and the other being the stickers. Then you could load your sheet, hide the layer/cut file of the backing card, and cut the kiss cut stickers. After that, keep your mat loaded, hide the sticker layer/cut file, and unhide the backing sheet layer. Then you can cut the backing card using the correct cut depth. I know it’d be more of a process to do that since you would have to babysit your machine and have it cut twice rather than just all in one go, but that’s the best solution I see right now. Let me know if you try this or if you find a better way to do it!

@ktann 3 года назад

Thank you so much!!! I think doing the 2 cuts is the answer! someone else suggested using the ipad could be causing the issue as well! Just started watching your vids and I love your art style!!!! 💜

@awildfaun133 3 года назад

@@ktann Ahhh thank you! 🥰 Let me know how they turn out!

@shannonroberts7242 3 года назад

How do you get your paper sketches on to your Mac to save to the cloud?

@awildfaun133 3 года назад

I have my iPhone, iPad and MacBook all connected to iCloud so when I take a picture on my phone I can access it from iCloud on my iPad or MacBook 😊 such a nice feature! If you have apple products and use iCloud, just make sure your photos are stored on iCloud (enable it in the settings) and you should be able to access them easily

@shannonroberts7242 2 года назад

Did you outline your images all at once or did you do them individually on the same file? :)

@awildfaun133 2 года назад

I did them individually on the same file 😊

@shannonroberts7242 2 года назад

I uploaded my cut file to circut design space but the edges of my images are gagged and not smooth. I thought I fixed this while adding the white outline for kiss stickers in procreate. What should I have done while in procreate to prevent this from happening?😌

@awildfaun133 2 года назад

Hmm did you use the trick I showed to make the sticker outlines? I haven't gotten any jagged edges doing it that way. You could also use procreate's assisted drawing tool where when you draw an arc and hold down the pencil, procreate will smooth it for you and you can tweak the shape of it. I'd use the hard airbrush tool if you do it that way. You can also add smoothing to any brush by going to edit the brush and turning up the "streamline" quality of it. Let me know if that helps or if you have any more questions :)

@shannonroberts7242 2 года назад

Hello, I did use the trick to create the white outline but than when I uploaded to design space it showed all the areas that were not smooth. So I tried to erase and straighten them out but no luck. I tried to cut the images as they were but the cut followed along the jagged edges. I’ll try what you suggested here and see what happens. Thanks for responding back.😌

@awildfaun133 2 года назад

Hopefully that works! Otherwise I just recently found that @birdietam.art has an insta reel showing another super easy way to make sticker outlines in procreate that you could try too. It seems similar but even easier than the way that I showed. Here's the link to the reel: instagram.com/reel/CShTDP3D9HT/? (hopefully it works) Best of luck and let me know if I can help with anything!

@shannonroberts7242 2 года назад

Wow! Thank you for the resource! Your awesome 🤗

@awildfaun133 2 года назад

@@shannonroberts7242 No problem! I’m always happy to help!

@taybreealohilani 3 года назад

when i edit the size of my drawing on my mac and re-import it to procreate it’s really big and then when i make it smaller it gets really blurry. did i do something wrong ? any advice ?

@awildfaun133 3 года назад

Are you changing the size of the image in procreate? Because if yes I have the same problem where it gets really blurry. That’s why I change it to the size I want the sticker to be using my Mac. Make sure the dpi remains the same when you resize it on your Mac to keep it from getting blurry. Let me know if that makes sense 😊

@taybreealohilani 3 года назад

@@awildfaun133 after i import back into my computer ? yes, sometimes it comes up too big or too small. but is it possibly because im not using the same size canvas as you? i was using like a 2.5wX3.5l maybe that's why? im new to this so im a just a bit confused hehe

@dollysicardi4664 2 года назад

What kind of mac do u use macbook pro

@awildfaun133 2 года назад

Yup just a MacBook Pro from 2015 I think?

@shannonroberts7242 2 года назад

I have tried a b- zillion times to do this the way you did and have failed! I can not figure out what I am doing wrong. I get all the way to print & cut part and that’s where things go south. Thanks for the videos though. I guess I’m not cut out to make stickers 😕

@awildfaun133 2 года назад

Awww don’t say that! What exactly isn’t working? Are the cut marks not aligned? I had to calibrate my machine a few times to get it to cut right

@shannonroberts7242 2 года назад

I print out the print copy and upload the cut copy to circut but some how the cut copy does not cut out the images, the cut does not match the image placement that’s on the print copy and the registration squares for the hack do not show up on the print copy or the cut copy. I can’t tell you how many times I redid my images, white outline, cleaning up the speckles around the images. Moving on the sewing now. I just bought a new machines. I like trying new things🙂

@awildfaun133 2 года назад

@@shannonroberts7242 hmmm I’m sorry. I use the same file for printing and cutting. I wish it could have worked for you but good luck with sewing!

@shannonroberts7242 2 года назад

Thanks 😌