How to Make Sublimation Magnets in Minutes

Подписаться 371 тыс.

Просмотров 20 тыс.

50% 1

Sublimation magnets are an easy project that make great gifts or make a whole set for your own refrigerator. Grab your sublimation printer and make magnets for everyone on your list. I have some free food prints you can use or add your own patterns or even photographs to these magnet sublimation blanks. Use the same blanks as I used or look for other magnets to use with your prints!
Links below may be affiliate links.
Get the free food patterns: angie-holden.ck.page/67b5f96b81
Blanks used:
One Piece Magnets amzn.to/44f9MCq
Chipboard Magnets amzn.to/44c6aB6
Other supplies:
Sublimation printer • The Best Sublimation P...
Sublimation ink • Sawgrass Ink Guide: Wh...
Sublimation paper amzn.to/3gZCaCx
Heat press www.thecountrychiccottage.net...
Lint Roller amzn.to/325oT3F
Heat Resistant Tape www.thecountrychiccottage.net...
Protective Paper www.thecountrychiccottage.net...
Heat resistant gloves amzn.to/3bfvjm8
Tape Dispenser amzn.to/3GTQGb1
Heat resistant Mat www.thecountrychiccottage.net...
Join Sublimation Prep: www.sublimationprep.com/
Other videos you may enjoy:
Sublimation Dry Erase Boards • The Best Sublimation D...
Sublimation Kitchen Towels • Sublimation Kitchen To...
Be sure to follow me on social as well!
Instagram / angieholdenmakes
Facebook / angieholdenmakes
TikTok / angieholdenmakes
Sign up for our free sublimation class here: lingering-pine-4030.ck.page/6...
Join my sublimation Facebook group here: / sublimationmadesimple
#sublimation #sublimationmagnets #sublimationblanks
0:00 Introduction
0:50 Supplies needed
2:26 Pre-pressing
4:17 Prepping blanks
5:31 Pressing
5:46 Results and tips
7:12 Finishing magnets
7:36 Hardboard sublimation
8:31 Wrap up

Хобби

Опубликовано:

7 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 62

@LisaVornhagen 11 месяцев назад

Those are really cute! Thank you for sharing and showing the process!

@AngieHolden 11 месяцев назад

Glad you like them!

@julieann5196 11 месяцев назад

Thanks for sharing Angie, super cute magnets.

@AngieHolden 11 месяцев назад

Thank you! 😊

@starbrown1219 11 месяцев назад

Love these magnets.Super cute. Thank you.

@AngieHolden 11 месяцев назад

Glad you like them!

@KarenBarnettAuthor 11 месяцев назад

That would be really fun with family photos! Thanks for the tutorial.

@AngieHolden 11 месяцев назад

They are!

@debodydesignsbyvanessawilliams 11 месяцев назад

Love the video. Thank you so much for sharing.💕💋💎💎💎💎

@AngieHolden 11 месяцев назад

Thanks for watching!

@CraftingwithEB 11 месяцев назад

i did mine with 2 by 2 size i used my auto press 400 degrees at 60 seconds. and when i used my hand press i had med pressure at same pressure and heat temp.

@AngieHolden 11 месяцев назад

Different brands of magnets will have different time and temperature recommendations.

@sumccaslin3984 5 дней назад

if you don't have protective paper, can you use teflon sheet for heat press , butcher paper, or parchment paper? also i just bought a htvront auto press, can you use that since you cant adjust pressure? thank you for this video .

@AngieHolden 2 дня назад

Butcher paper works fine! The auto press would probably work okay for these but I haven't tried it.

@mlistander 11 месяцев назад

Hi Angie. I have been watching all of the videos 11 months ago about the Siser DTV. I don’t see a lot of buzz around it anymore. Just thought I get your take on it.

@AngieHolden 11 месяцев назад

I feel like it is an okay product. It did have some issues with people pressing and wearing immediately. The product will run when wet when you do that. I think that may have affected people purchasing.

@marythomas2357 11 месяцев назад

I bought the siser dtv to make myself some Mario shirts for our VBS, although they look great and people like them they still have that plastic feel etc when you touch them same as the old iron on from years ago

@KellyPreston-gm4fx 3 месяца назад

Was Celsius do I put my big pull down on for my magnets as they bubble at the back

@AngieHolden 3 месяца назад

Not sure as mine did not bubble in the back that I noticed. Maybe too much heat?

@AnnieHi 11 месяцев назад

Those are super cute! Love them! I do have a curiosity question...I have used other MDF blanks with the add on magnet and have found that the magnet tends to peel off the back after usage (moving it from one location to another) and was just wondering if you saw any indication of this with the ones you used.

@AngieHolden 11 месяцев назад

I was pleasantly surprised that the adhesive seems to be really strong. However, I have not used them that long so it may not last!

@shaunstricklin 8 месяцев назад

Wonder if this would work on some magnet rolls I have from a construction job, only thing is they’re not glossy

@AngieHolden 8 месяцев назад

The magnet has to have a sublimation coating in order to work.

@beckyzayas5749 11 месяцев назад

I bought a PYD life sublimation oven for full mug decoration, and I wonder where else can I use it for. I also have Cricut autopress.. Can I use them for the magnets?

@AngieHolden 11 месяцев назад

The Autopress would be your best bet for these and would work fine!

@lorihodgson5691 11 месяцев назад

Silly question…can you use sublimation sheets or infusible ink sheets on these magnets? Thank you! Great video by the way.

@AngieHolden 11 месяцев назад

Definitely!

@therealbenallington 3 месяца назад

Hi Angie, at around 5:44, how did you get the edges of the print to be flush with the edges of the sublimation blank? I would think you might have to trim the overlap (with an exacto or scissors maybe) but it looks like you just kind of popped off the excess with your fingers? 5:47

@AngieHolden 3 месяца назад

I didn't make them flush! I overlapped the print slightly in all directions. The time stamps you mentioned I am just removing the sublimation print.

@therealbenallington 3 месяца назад

@@AngieHoldenOh, I get it! Sorry, I didn’t think it through. Thanks!

@patresaplus3274 7 месяцев назад

What’s the best way to change the brand of ink? Is it ok to add a different brand of ink on top of another ink already in the eco tank?

@AngieHolden 7 месяцев назад

The best way is to completely drain and flush the printer before adding new ink. It is not an easy process.

@Marilyn31311 7 месяцев назад

Can you use a regular heat press with this or is the cricut easy press better?

@AngieHolden 7 месяцев назад

Either one!

@wandamanning7913 11 месяцев назад

Can you share a link for the tape dispenser?

@AngieHolden 11 месяцев назад

I have it linked in the description below the video.

@explorewithjanienhung4122 2 месяца назад

Silly question. Can i remove sublimation and resublimate those magnets?

@AngieHolden 2 месяца назад

There is not a way to remove sublimation completely.

@explorewithjanienhung4122 2 месяца назад

@@AngieHolden thank you.

@gracellesu 9 месяцев назад

Do you need to put photo top? Or is it already waterproof?

@AngieHolden 9 месяцев назад

It is fine just the way it is!

@dianachau7857 11 месяцев назад

Can we cut into shapes in those magnets?

@AngieHolden 11 месяцев назад

Not these! They do make sheets you can cut with your Cricut but I haven't seen any that you can both sublimate and cut.

@lindsaybriggs3089 10 месяцев назад

Can these magnets stick on cars?

@dianneiacovou5759 14 дней назад

Hi, no matter what I do with the normal thing magnet, even on 165 celcius for 50s, the magnet still bubbles up!

@AngieHolden 13 дней назад

It is an issue with some of these. You might try a different brand for the magnet.

@dianneiacovou5759 13 дней назад

@@AngieHolden Hi Angie, yes, I think I have a different magnet type. I've done 165oC at 45 sec and almost perfect, no bubbling except a tiny bit that is hardly noticeable, getting there, yay! Did help to put a metal plate under the magnet, then it goes under a bread board until it cools down. Hopefully we have more successes. Tx so much for all your great help in your videos💗

@AngieHolden 9 дней назад

Happy to help!