How to Manual Reset Canon G3010 Printer and fix 5B00 or P07 Error.

Подписаться 10 тыс.

Просмотров 42 тыс.

50% 1

Full tutorial on how to Manually reset the Canon G3010 Printer.
Learn how you can manually reset your Canon G3010 or any Canon G-Series Model without using any canon service tool or software.
This can be also applied other Canon G-Series Model Printers like Canon G2010, G4210, G4410, G4412, G1010, G3010 Printer.
Follow these simple steps:
1. Set the printer to Service Mode
Press and Hold the Power button then press Stop button 6 times.
Wait for the Green light become steady.
2. Press the Stop button 3 times and the power button once
to check the current waste ink counter value.
3. To reset the waste ink counter value.
Press stop button 5 times and power button once.
4. Once successful the printer will print EEPROM Data
5. Once Done Printing, Turn off the printer.
Please subscribe to our RU-vid channel to help us grow and get more tutorial updates.
Thank You!
Follow us:
Facebook Page: / tech-aid-tv-1038816055...
FB Group: / 293191639399719
#Techaidtv
#Freetechtutorial
#Canonprinter
#CanonG3010
#SuppporCode5B00
#printertechtutorials
#canonmanualreset

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 73

@srinivasaprasanths886 Месяц назад

This is the only guide where the service mode entry was given correctly 💯 worked perfectly.

@kiyohashi13 10 месяцев назад

million thanks for this guide! better than most of the tutorial out there!

@Tech-aidSupport29 10 месяцев назад

You're Welcome It's our pleasure to help We are grateful for your support

@leongkeeng6676 13 дней назад

Very good, many thanks.

@Tech-aidSupport29 13 дней назад

You're Welcome

@justinmarino5218 8 месяцев назад

hello can u please make a video for P10? this is currently the display error that i have. my printer can print (after i turned it off and on again) about half a page and then would suddenly stopped printing, followed by the P10. i can connect wirelessly and scan stuff too. so aside from this printing problem, everything works. the ink are also not depleted so idk what to do.

@johnbridge7531 6 месяцев назад

you deserve a subscription.

@Tech-aidSupport29 6 месяцев назад

Thank you It's our pleasure to help We are grateful for your support

@Krrrimmi 2 месяца назад

IT WORKS! NO NEED to waste money on repairs. ARIGAPUT GOZAIMASU! 😃

@grace0819 Год назад

Thank you so much for the helpful tips, so easy to follow❤

@Tech-aidSupport29 Год назад

You're Welcome It's our pleasure to help We are grateful for your support.

@RogelieDurana-gr6mu 6 месяцев назад

Wow!!! It really works.. Thanks to you.. God bless u always

@Tech-aidSupport29 6 месяцев назад

You're Welcome It's our pleasure to help We are grateful for your support

@awareness99 9 месяцев назад

THANK YOU SO MUCH SIR IT IS VERY USE FULL FOR ME. MY PROBLEM RESLOVED

@Tech-aidSupport29 8 месяцев назад

You're Welcome It's our pleasure to help We are grateful for your support

@riodembo82 7 месяцев назад

Terima kasih atas kontennya yang sudah membantu.

@pedrozurcher2674 4 месяца назад

Super, it works. Solved my problem easey. Thaks a lot

@Tech-aidSupport29 4 месяца назад

You're Welcome It's our pleasure to help We are grateful for your support

@amieldorothysantos8406 6 месяцев назад

thanks much for the help. super helpful.

@Tech-aidSupport29 6 месяцев назад

You're Welcome It's our pleasure to help We are grateful for your support

@rahuljoshi1052 Год назад

THANK YOU SO MUCH SOLVED MY PROBLEM

@Tech-aidSupport29 Год назад

You're Welcome It's our pleasure to help We are grateful for your support

@diwisely2187 6 месяцев назад

It works, Alhamdulillah, shukran..

@Tech-aidSupport29 6 месяцев назад

You're Welcome It's our pleasure to help We are grateful for your support

@ronykilava 11 месяцев назад

EEPROM data can be printed once only?

@Tech-aidSupport29 11 месяцев назад

No Just repeat the process then you get the EEPROM data again

@santoshchaudhary9419 6 месяцев назад

THANKS, IT REALY WORKED

@Tech-aidSupport29 6 месяцев назад

You're Welcome It's our pleasure to help We are grateful for your support

@vinaypalija8285 3 месяца назад

THX DUDE IT WORKED

@Tech-aidSupport29 3 месяца назад

You're Welcome It's our pleasure to help We are grateful for your support

@sider3nokia 6 месяцев назад

Thank you, that helps me

@Tech-aidSupport29 6 месяцев назад

You're Welcome It's our pleasure to help We are grateful for your support

@5133719ify 2 месяца назад

謝謝~幫了大忙

@kairatmynbayev9322 4 месяца назад

Thanks a lot, this solved my problem

@Tech-aidSupport29 4 месяца назад

You're Welcome It's our pleasure to help We are grateful for your support ♥️

@vishalpavithran5499 Месяц назад

but the time to cheak d ink level print shows blank with faded starting

@Tech-aidSupport29 Месяц назад

Try to print head cleaning

@Goni2345 10 месяцев назад

Красавчик ❤❤❤🤝🤙🫡👍

@ronykilava 11 месяцев назад

mine is not showing 0 waste ink sheet, what to do ?

@santoshkalla412 8 месяцев назад

Good morning sir Followed the same procedure ,but the printer not turned into service mode still orange light is blinking P07 error

@Tech-aidSupport29 8 месяцев назад

Try for the second time

@ninatanangonan 23 дня назад

Same

@nnextechacademy 10 месяцев назад

Thank you somuch, it did help

@Tech-aidSupport29 10 месяцев назад

You're Welcome It's our pleasure to help We are grateful for your support

@LexiMarkielleBidaja 4 месяца назад

helpful lods

@Tech-aidSupport29 4 месяца назад

You're Welcome It's our pleasure to help We are grateful for your support

@ZigCube-xs8yz 2 месяца назад

Not working on my Canon G3010 with same error code.

@Tech-aidSupport29 2 месяца назад

Turn off the Printer and do it again

@JimsonOjeda 2 месяца назад

Ano Po Ang ibig sabihin ng D=000.0 wla na Po bang ink?

@Tech-aidSupport29 2 месяца назад

Ink Absorber Counter po yan sir

@leahlopriego389 Год назад

Thanks😊

@Tech-aidSupport29 Год назад

You're Welcome It's our pleasure to help We are grateful for your support.

@saranyan4685 Год назад

This method is not working for me.. wat to do..😢

@francineannemartizano1651 8 месяцев назад

Hello my printed didn’t work but the code is P2

@Tech-aidSupport29 8 месяцев назад

Try to move the printhead to left side and clean stain on encoder strip

@PinchuPandaValorant 10 месяцев назад

what if i never replace pads and keep doing ur method

@Tech-aidSupport29 10 месяцев назад

Yes It works even without replacing pads

@PinchuPandaValorant 10 месяцев назад

@@Tech-aidSupport29 work for g6070?

@greenapple2287 2 месяца назад

Bakit sakin sir kahit nasa service mode na nagbiblink padin yung orange

@Tech-aidSupport29 2 месяца назад

Hintayin nyo lang po hanggang ang stable

@varshaam7802 8 месяцев назад

Hwy while printing its showing Orange light again

@Tech-aidSupport29 8 месяцев назад

What is the error code??

@masturamdyon9782 2 месяца назад

Mine is not working after press Stop 6 times. Tried it twice

@Tech-aidSupport29 2 месяца назад

Turn off your printer and try again

@masturamdyon9782 2 месяца назад

@@Tech-aidSupport29 did it few times. Still the same

@kouayethierrydieun2972 Год назад

Merci

@Tech-aidSupport29 Год назад

You're Welcome It's our pleasure to help. We are grateful for your support.

@sakinahmajid9574 7 месяцев назад

My printer doesn't make on

@Tech-aidSupport29 7 месяцев назад

Try to replace power supply

@BalaDhungana Месяц назад

my printer did not work, I try 10times.

@Tech-aidSupport29 Месяц назад

It might be a board problem

@harisutradhar5079 Год назад

Thanks sir

@Tech-aidSupport29 Год назад

You're Welcome It's our pleasure to help. We are grateful for your support.