How to manually adjust VTX Power on TBS Unify Pro32 Nano from 25mw to 400mw VTX 

FINALLY!!!! Sometimes the written word just isn't enough. TBS needs to do instructional videos for this stuff. But it's guy's like you that make this hobby a community. It's guys like you that end up helping the FPV community. I read the manual over and over and couldn't get it. Awesome info video thanks again.

Wow this is so helpful even in 2024. Thank you so much. I'd be lost without your video 😂

I have struggled with this damn thing for days and simply could not get it unlocked. Until I found your video. Great job and thanks for helping me.

Thank you so much. I was starting to get frustrated with it until I watched your video. It’s a short 3 seconds!

Finally. Looked all over to find out how to do this and nobody has it but you. Thanks

Hi, thanks alot for making this video. very easy to understand and it helped me unlock my tbs vtx,..... i had no idea why it was at the wrong channel and only 25 mw...... 😁👍

Very good tutorial. I have read the manual, but the timing made me very confused, since it is not exactly the stated time needed (as you mention, as well). This makes it very clear. Thank you for sharing!

Great video. I keep coming back to this video when I get a new Unify Pro32 nano. Eventually I'll remember this.

This deserves more viewers

finally a clear video on this nano pro 32. thanks!!!

Thank you, you are the only one I found that described the process correctly. Made perfect sense. 🤘😁👍

Thank you for making this.

Damn, thank you so much. I was getting really shitty range with mine and couldn't figure it out.

thank you very much your video is well explained and helped me to unlock mo vtx nano, greetings from Mexico

Thanks mate you help me a lot

Thanks for the video.

Thank you for your great video. I made a huge mistake when bought a TBS Unify Pro32 nano for my 5 inch quad. Can I mod it to my 5 inch? Just solder it to flight control or do I need something else?

It works! Thank you

GREAT THANKS

THANK YOU!!!

When I press that button - nothing happens - the leds continue their intro blinking show until they finish going through the menu items and then only blue led stays on indicating the vtx is locked. The same happens on my other two Unify Pro32 Nanos... Purchased at different times from different stores, so it is practically impossible they allcome from one batch with faulty buttons.... I tried short press, mid press, long press, double click, holding buton pressed while powering up, pressing the button after the intro flashing sequence is over - same result... Has TBS changed the way to unlock the full power recently.

Thanks bro, why can't the included instructions be this clear....

Thank you 👌👌👏👏

Merci à vous 👍

Thank you :)

I do I know if my Pro32 Nano is unlocked or not? Should I just try flying out and see if it can go further? its on a whoop

Nice!

Hopefully this will fix my issue. Only getting horizontal lines lines at 25mw. No video, 2 different cams. Verified 2 different bands/channel combos.

Thanks.

Yo Blake, nice video, helps a lot - do u have any information on the temperature settings?

Thanks :-)

Thanks!!!

nice video thx👍👍👍

Great video, but I still have a weird situation. My red/orange light does six teirs, instead of three. When you plug it in, it's supposed to blink what ist's set for...One red blink, X blue blinks, two red blinks, X blue blinks, three red blinks, X blue blinks, then it 's supposed to got to normal or standby mode, (red and blue light solide) Well mine keeps ging, 4 red blinks, X blue, red5 and 6 blinks, then repeats. not sure if cam shot. What board are you using is that an aio crazybee F4? I'm almost done building a toothpick, the Gnarly primo3, I'm using the crazybee f4 with built in flysky rx. I go very light on my telemetry, so I din't even hook up smart audio. Powered nano and cam ss(RunCam Nano) seperately, off the 5v pads on fc, and then just connected the video wire between cam and vtx. I was wondering, did not hooking up smrat audio wire form the unify nano cause it to throw some weird error? I've done it that way a bunch of times, on other builds and other vtx's, I use flysky on sub 120mm quads wth Evolution radio, and a dock king, so I really don't need BF OSD on my smaller buisds. Any ideas you have, or any others stopping by, would be greatly appreciated, thanks!!

👏👏👏👏👏

top tks

hi whats the power consumption of that board in the standard settings? it consumes 25mW?

Wow convoluted

Idk why but mine refuses to go past 100mw 2 blinks....any idea?

This is so fn frustrating. I've got both lights but no ability to get any more than 25mW. I can go through the changes in the OSD and it even shows in Betaflight Configurator under the Video Transmitter tab as 1W+, but it's still showing 25mW in my OSD. I've done this exact process 5 or 7 times already. It shouldn't be this difficult. I've got the Unify PRO32 HV. It should be the same, right?

hello, i have done the same thing as you with the tbs nano vtx. In my goggles still say 25mw, is this normal? thanks

What about unify pro hv , i can't manage to use sa using osd

Very helpful! Maybe a dumb question but can i use Crossfire LUA Scripts on my QX7 that doesn't have a Crossfire Module ?

Where'd you get the tweezers? Really like them.

Does this boost your range?

Hello , can i set via smart audio ? And do i need to press button unlock if want to set 400mw via smart audio

I figured power out finally, but I can’t get the damn thing to stay locked once in unplug battery. Please don’t tell me I have to hold that fragile little button 20 seconds every time I fly? 😤

mine won't go past 100mw 2 blinks.. when adjusting it says it did.. get 3 blinks but then it goes back to 2... this is stupid next time HGLRC cause you don't have to do this crap..

thank you bro