How to manually release electronic parking brakes (2012 Tiguan)

Подписаться 6 тыс.

Просмотров 1,3 млн

50% 1

You don't need to go out and buy an expensive scanner. Just follow these steps and you'll be on your way in no time.
Don't forget to subscribe =)
/ x5overland
/ x5overland
Top Secret Link - bit.ly/2leOCoM
Camera & Audio Equipment:
DJI Osmo Pocket - amzn.to/2WaxL5M
DJI Mavic Mini - amzn.to/2OaLrcB
Canon M50 - amzn.to/3gYPsNJ
Rode Wireless Go - amzn.to/2W6BK3e
128GB Micro SD Cards - amzn.to/2ZXu18z
Freewell ND Filters Mavic Mini - amzn.to/2ZjDxno
Ulanzi Osmo Pocket Holder - amzn.to/3eoN1SA
Outdoor Gear:
Alpicool C15 Fridge - amzn.to/3g1CxJG
Spot Gen3 GPS Messenger - amzn.to/2PVy4xI
Weboost 4-GX OTR - amzn.to/2ZmoB87
Yeti Ramblers - amzn.to/3gYR3Dd
Engel Cooler - amzn.to/3iOPUjd
ARB Awning - amzn.to/2Zg1ADF
Traction Boards - amzn.to/3iS4lDa
Kelty Bestie Blanket - amzn.to/38Pwmq7
25MM Wheel Spacers - amzn.to/2CpZB75
Hi-Lift Jack - amzn.to/2DsSStk
Lighting & Electronics:
LED Fog Lights - amzn.to/3iTrGnP
LED Under Hood Lights - amzn.to/2C3IvMj
Midland CB Radio - amzn.to/2ZkzFCA
Smittybilt Air Compressor - amzn.to/32aM0v5
SD Card Reader - amzn.to/38QdiIp
SanDisk 1TB SSD - amzn.to/2BU2IUV

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 388

@X5Overland 5 лет назад

Thank you guys so much for your support! Please help our channel grow by hitting that SUBSCRIBE button =)

@goranpopovic3590 5 лет назад

Hello. I have 1 question about brake pads. I changed rear brake pads but constantly have annoying sound( like metal to metal but rumbling ). Mechanical guy sey this is normal because its pads is new. I dont believe so much but i must to ask you ,it's normal or not( sound from brakes pads)!?. Thanks

@X5Overland 5 лет назад

Yeah, for the first few days I'd say its pretty normal to have some sound, It should go away over time. If it seems like its making more noise than you think it should, try having your rotors resurfaced.

@bernardgmunger 4 года назад

One little note for next time: the pads have to slide in and out (braking and releasing brake power). It's best to put just a *touch* of anti-seize grease on the interface between the caliper holder and the pad, where the pad's guides extrude on either side, to guide the pad at the right place. Not too much, you don't want it to smudge the pad or the disk. Also, a manual tool for actuating the mechanical side of the electro-mechanical brake (clockwise) instead of a power tool. You both risk hurting yourself (yep yep yep) and doing damage to the small gear in which you put your TORX 40 bit to turn... A ratchet or T-40 screwdriver and manully turn... It 's a lot of turns, but not worth the risk of damage to speed things up with a power tool.

@erwinroman4217 6 лет назад

No need to remove the motor. Remove the connector and apply slight pressure with a clamp. Then attached a 9v battery to the motor with clip leads. If the motor runs then strains, reverse the clip leads. As the motor runs tighten the clamp slowly to retract the piston. When the motor stops, you're done. Just did mine and it's a piece of cake. After pads are replaced, with the engine off, pump pedal slowly and in a few strokes it will be firm. No need to bleed as the fluid circuit was not opened. Cycle the P brake a few times and you're done.

@X5Overland 6 лет назад

I hadn't even thought of that...Genius. That would have saved my knuckles haha. Thank you for your comment!

@sakitlikod1 5 лет назад

Is this same procedure for 2012 Audi Q5? Ty

@alanw5812 4 года назад

i use 12V

@Lutonguy999 4 года назад

Really good video helped me a lot. Just one thing to note before doing this job you should buy the small T30 screws and replace them as mine where really rusty and hard to take off

@bernardgmunger 4 года назад

One little note for next time: the pads have to slide in and out (braking and releasing brake power). It's best to put just a touch of anti-seize grease on the interface between the caliper holder and the pad, where the pad's guides extrude on either side, to guide the pad at the right place. Not too much, you don't want it to smudge the pad or the disk. Also, a manual tool for actuating the mechanical side of the electro-mechanical brake (clockwise) instead of a power tool. You both risk hurting yourself (yep yep yep) and doing damage to the small gear in which you put your TORX 40 bit to turn... A ratchet or T-40 screwdriver and manually turn... It 's a lot of turns, but not worth the risk of damage to speed things up with a power tool.

@X5Overland 4 года назад

All very good information. Thanks for sharing!

@Leanintosteer Год назад

This worked brilliantly whilst doing my discs and pads on my 2015 tiguan today. Thanks for the informative video 😊

@brianjames4169 4 года назад

Wish I would’ve seen this earlier today. Would’ve helped eliminate a world of frustration.

@X5Overland 4 года назад

Yeah, the driver's side was super difficult, I wasnt about to struggle through the passenger side too lol. But now we know!

@alekseisukhoi8914 11 месяцев назад

this is one of the rare videos where everything was said briefly and to the point. Thank you buddy!!

@adamjoefellows 2 года назад

I love you with all my heart!!!! Lol If it wasn't for this video I don't know what I would have done. I had everything torn apart and was stuck cause I couldn't compress the piston! Thank you so much for taking the time to explain this and make this video!!!

@Tom_Clark7 2 года назад

You Sir are a life saver, had my car all jacked up new pads in and couldn’t work out why the piston wouldn’t just push back like the fronts. Did a bit of Googling then went out and bought a caliper wind back tool which still didn’t work after a lot of messing around (the circle plate didn’t fit my vehicle) and found several videos on YT talking about using software to retract the piston but eventually found your video. Thanks to you the car is now back on its wheels and usable again

@andylong3859 2 года назад

After doing this would you pump the peddle a few times then apply the handbrake switch on and off a few Times to calibrate it ?

@foreverfornever1124 2 года назад

Great Vid!! A 2 hour job for free 99, gotta love "do it yourself" mechanic's!! Much appreciated 👌🏽

@sirpeepster 3 года назад

First off, a great bodge!! Just do be careful as the OBD also recalibrates how tight the motor goes when handbrake is applied so using this method, there is a small chance of cracking your rotor. Cool hack though

@X5Overland 3 года назад

Wow, I've never heard of that happening! That would be awful lol. Thanks for letting everyone know =)

@jimmychow4917 2 года назад

very nice video. Saved me a lot of time. no need to get an ODB II to rewind the e brake.

@richardhuffman58 3 года назад

Best video I’ve seen so far! Thank you for sharing!!

@X5Overland 3 года назад

Thank you!

@smartnothard2400 3 года назад

@chriscreates4300 9 месяцев назад

Glad I found your video, got a brake job to do tomorrow. Thanks

@rickcski8082 3 года назад

Apply 12vdc in the reverse polarity to the parking brake motor. This is how I do it on my 2008 Audi S5.

@X5Overland 3 года назад

If I had to do this job again, I would definitely do it this way haha.

@cheyennequathamer5100 11 месяцев назад

Honestly THANK YOU for this video. Holy crap a life safer

@PoLoBaseGod 3 года назад

Take a 9v battery and some wire and it will also work if u press on Connector

@davedecker4276 4 года назад

Awesome my friend! Virtual beers to you for saving me huge amounts of grief and time. Thanks so much. Cheers, Dave

@X5Overland 4 года назад

Glad I could help! Cheers

@davedecker4276 4 года назад

@@X5Overland Spoke too soon! Dash says parking brake owners manual and can't start car. Light on parking brake is flashing. Hmmm

@X5Overland 4 года назад

Oh no! Thats not great news. Hmm. Can you pull the ebrake? Does anything happen?

@davedecker4276 4 года назад

@@X5Overland I think the battery went low. Left the ignition on. I'm charging the battery and hoping that was the issue. 80% sure that's what it is

@davedecker4276 4 года назад

Yup, that was it . All good now! Thanks a gain

@ricric828 2 года назад

Un video excelent,nu este usor de realizat,uneori trebuie si tester,dar cine este meserias ,meserias ramăne🙋👍👍

@tbrooks655 3 года назад

Saved me hours of frustration 🙃 thanks

@davidanderson696 2 года назад

Good video but my favourite bit was the guest appearance by the dog

@HeadsUP253 Год назад

I use to do what you did in this video, but just unplugging the electric parking brake connector harness and i would just connect 2 wires with 9v battery connected to retract the piston instead of removing the parking brake motor

@ch0wned Год назад

You can do it with a 9V? That is amazing information, thank you!

@HeadsUP253 Год назад

@@ch0wned yeah bought a small alligator wire clips and 9V battery will retract the electric parking brake piston :))

@jimbax1 10 месяцев назад

Thank You! 👍

@derekbond3512 3 года назад

Great information a great help, thanks for taking the time and effort to put this out, thanks again for sharing.

@X5Overland 3 года назад

You're Welcome =)

@ciprianionutapetroaie7314 6 месяцев назад

did you release electronic parking brakes on all wheels or only on the brakes on one, I'm a beginner with volkswagen Passat b5.5 1.8 t petrol, I can do what you did and you release the electronic parking brake

@AkramKotka 3 года назад

Good job you've done, and sorry for your hand.....

@stevenharvey4695 3 года назад

you can’t just push a piston in if it has the handbrake on it as well You have to screw it in. some vehicles have a left hand thread

@turbowank16v 3 года назад

Thats what i wondering.has vw done away with the wind back type piston on these calipers.so how did a c clamp just push this back.

@ravn-zx5vz 3 года назад

You cant push it when you have a regular hand brake. On this car there is a electric hand brake that has another sistem amd when the brake is retracted you can just push the piston.

@joen4127 4 года назад

Couldn’t you do the brake job without the electronica parking brake engaged in other words off? Just have all of the grounded wheels chucked so it doesn’t roll while you’re working on one side

@smartnothard2400 3 года назад

Good point - I wonder if this would work. For autos put to park and for manual use a gear? Maybe a brick too?

@bigherm4456 Год назад

This was very helpful thank you soo much for this video.

@cyruslarosa5291 5 лет назад

You are a god send! Thank you so much!

@X5Overland 5 лет назад

You are very welcome!

@thomashoggatt297 2 года назад

Thank You Thank You. All great suggestions .I 'm going to try it.

@Lexx1994 2 года назад

Thanks for the video. I did this but I have a problem , I saw that you removed the motor housing pretty easy, just pulled on it, I had to pry it open, was pretty hard to take off, the bolts also, there was a lot of white dust coming off. Did all things good but now I can't reassembly it, that o-ring is a pain in the ass, the housing doesn't get past it and I also see that the o-ring is pretty loose.. tried lubing everything up with silicone grease but nothing. Any suggestions?

@alfonsosierra406 2 года назад

Just did everything in this video changed both rear brakes and now breaks are extremely squishy pushing all the way down. Am I supposed to loosen the piston the back after tightening it ?

@QUANT_Trader88 Год назад

Man this video saved me

@nirmaldoodee8952 3 года назад

Do you believe it will work with a mitsubishi eclipse cross??? I has pretty same type of electronic brake module as in your video 🙏?

@faisalthakur8392 3 года назад

VERY INFORMATIVE AND HELPFUL VEDIO AND PERSON

@X5Overland 3 года назад

Thank you for your kind words!

@eliudherrera7435 3 года назад

Exactly what i needed . Big Thanks

@X5Overland 3 года назад

Happy to help!

@bmircea3960 3 года назад

After tightening that screw under e-brake , before mounting e-brake must be unscrewed ?

@matthew-ui6db 2 месяца назад

thanks, lovely vid!

@kevmak2600 4 года назад

So sorry but had to laugh.....great to see I'm not the only one that hurts myself all the time. Great info too BTW.

@X5Overland 4 года назад

Haha, even the small projects draw a little blood. Thanks for the comment!

@alkarim5890 Год назад

What’s the bleeding procedures for this electronic caliper ?

@stickan1993 4 года назад

Hello, do you know why I can go clockwise forever when I release the pressure? When I have removed the motor and manually turn clockwise I can keep going

@X5Overland 4 года назад

Oof, Im not sure. Is this on a tiguan as well?

@stickan1993 4 года назад

X5 Overland yes, but i also asked on a forum and they say it doesn’t matter, just thought it was weird that yours stops and mine doesn’t

@X5Overland 4 года назад

Thats interesting. Hopefully it all works out. Manufacturers are making it needlessly difficult to change your own brakes lol.

@stickan1993 4 года назад

Yeah, dealership in Sweden only changes the caliper, they charge 500$ plus job. The motor cost 50$ lol

@X5Overland 4 года назад

Dang! Thats ridiculous

@AsianBlackR3501 3 года назад

Can you remove the power connector and apply 12V power in reverse to the motor to retract it?

@X5Overland 3 года назад

We've heard a few people ask this and we aren't sure if it would work or not. If you happen to try it, let us know if it works!

@williamgrant1127 3 года назад

Yes A 12 volt trickle charger works great,try forward and reverse

@juergenscholl2843 3 года назад

It works, perfectly.

@gregarmstrong4653 2 года назад

Thanks, this really helped

@capitalsbeast Год назад

hi nick from x5overland]

@heliosc7 5 лет назад

Can you still do the ebrake trick on a 2016 Tiguan? Or did they change anything?

@X5Overland 5 лет назад

I'm not entirely sure. I don't see why they would change the braking system so it might just work. I would take the tire off and see if it looks the same as this video. Best of luck!

@keithdunderdale8027 4 года назад

Great video You should really wear gloves to save your handsa nd fingers!! brake dust is not good for lungs and skin.

@X5Overland 4 года назад

Thanks! Yeah, gloves are a must. I always forget to buy a box when parts shopping lol

@babar68350 2 года назад

Thx Man ! you saved my life ! :-) it worked perfectly.... (on an Audi A4 B8 - 2014)👍

@X5Overland 2 года назад

Happy it helped! I sold that Tiguan real quick haha.

@ivanbautista7489 4 года назад

After u tightened the e brake motor... did u have to “un-tighten” it...

@X5Overland 4 года назад

No, I just put everything back together and pulled the e-brake as usual. I wouldn't "tighten" it, that was a poor choice of words. I just spun it clockwise until it stoped but I didn't torque on it.

@akmjolnir-v4r 3 года назад

Any idea if this works on Gen 2 Tiguans? (2018)

@X5Overland 3 года назад

I cant imagine why not. A lot of people have been commenting to just put 12v backwards on the motor and it will retract but i haven't tried it

@jansolo55 3 года назад

@@X5Overland It will work . Take a spare battery, connect on two cables, release the socket and connect the 12 V + to - , and - to + , so the motor will retract . Change the brake pads, and then activate several times the parking brake on/off to bring it on right place .

@yammysweetchocolate Год назад

So when you are retrecting will motor stop itself??

@peterjohnstudios1142 3 года назад

Thanks so much for this!

@X5Overland 3 года назад

You're so welcome!

@jasonmorales1927 3 года назад

Question? After you wine the motor to allow for the piston to push in, do you have to loosen it or did you just put the ebrake actuator back on without doing anything?

@X5Overland 3 года назад

Im not sure I understand your question. After you wind the motor back to push the piston in, all you have to do is complete the brake job and then pull the e-brake switch as usual. It will take a little longer for the brakes to engage but they will eventually. Hope this answers your question! Best of luck

@yuzeyy7357 2 года назад

@@X5Overland I think he meant that when u tighten that "O ring" on the motor to push piston in, when u finish it, do you have to release it after the piston is in?!? 2:48 on your video

@jcjcjcjcjcjcful 3 года назад

what is the status of the car when you did the brake change? Do you release the parking brake and shut off the car?

@X5Overland 3 года назад

As soon as we put it in park, the e-brake sets itself. So we put it in park, shut the car off, and I believe we disconnected the battery before working on the car.

@jcjcjcjcjcjcful 3 года назад

@@X5Overland So if u put in park, the ebrake sets itself, then u shut the car off, the ebrake is still set? I guess im trying understand how do you leave the ebrake 'unset' with the car off so you can actually do the brake job? Otherwise with the ebrake set, can u even remove the caliper bracket?

@X5Overland 3 года назад

Thats a good question lol. Im not sure why the caliper came off so easy. Maybe we didn't have the ebrake set after all? In any case, the electric motor won't let you push the piston back in without doing what we did in the video or applying 12v so the motor retracts.

@jcjcjcjcjcjcful 3 года назад

@@X5Overland yea i understand the part about retracting the motor/gear so u can push the piston in. I just wonder if the ebrake is automatically set everytime u shut off the car, how do u even loosen the caliper bracket at all lol.. i guess i'll see what happens when i do mine

@X5Overland 3 года назад

I have never thought about that lol. Best of luck!

@emmanuellemoa6220 7 месяцев назад

Thank you sir

@anmiwo9 4 года назад

doing this this weekend on my S4. When you reset the parking brake is the car on and should it be in neutral or park?

@X5Overland 4 года назад

I dont recall. I believe we started the car so the brake would "release" then pulled the ebrake while the car was running and in park. It look about twice as long for the motor to squeeze the brakes but it did. Afterwards, it ran in like normal. Best of luck!

@pablo123b 4 года назад

question did you have to losen the torx on the o ring before putting the electric brake back on?

@X5Overland 4 года назад

No, i just put everything back together and pull the electronic ebrake.

@pablo123b 4 года назад

@@X5Overland thx buddy for the quick reply

@X5Overland 4 года назад

No problem! Hope everything worked out!

@jimmychow4917 3 года назад

very good idea. Thanks

@X5Overland 3 года назад

Hope it helped!

@leovaldivia4185 Год назад

Will this work on 2012 Audi a6?

@ch0wned Год назад

It should.

@angeltome425 2 года назад

Does the e brake have to be on or off to begin this ?

@freogael6557 Год назад

I'd hazard a guess that it has to be off, so with the front wheels either chocked or the rear end on stands to prevent any movement.

@NFTPTCG 4 года назад

Great Video

@X5Overland 4 года назад

Thank you!

@bryanv.8066 3 года назад

You didn't do something VERY important on a brake job. Resurfacing of the rotors, AND fully lube the pins that go into the caliper bracket, the two bolts you took off screw into the pins, they must be fully lubed with a grease so that they move freely. Very important

@X5Overland 3 года назад

Very good points! Thanks for the comment!

@edwardcristian391 3 года назад

Works on Audi a4 b8 2010 ?

@smartnothard2400 3 года назад

Does anybody know if a 2018 model is the same?

@aatifhusain7201 4 года назад

Good idea boss

@usa6035 4 года назад

Thanks 👍👍👍

@X5Overland 4 года назад

You're welcome!

@6482Gh 4 года назад

how do you clear the fault code afterwards

@X5Overland 4 года назад

Hmm, we didn't have a fault when we did ours so I'm not quite sure. Sorry!

@PANDIT.01 4 года назад

Thanks

@X5Overland 4 года назад

You're very welcome!

@deehutchinson3127 4 года назад

Top video👍👌

@X5Overland 4 года назад

Thank you!

@jasonjay7650 4 года назад

Will it be the same on the rear as my golf R?

@X5Overland 4 года назад

Unfortunately, i have no idea. Best of luck though!

@alihusni8620 4 года назад

Tanks info ser

@X5Overland 4 года назад

You are very welcome =)

@alihusni8620 4 года назад

Greetings black Indonesian nails or Indonesian mechanic

@alihusni8620 4 года назад

And greetings blisters fingers

@kingofkings2934 3 года назад

Can't you just put it in neutral ?

@X5Overland 3 года назад

Uuuuhhhh, very maybe lol. I did not try that.

@kingofkings2934 3 года назад

@@X5Overland yeah after doing It i don't know if it did anything i was able to slip it off but in any event you have back it off to get the new pads to fit.

@georgianaarbaselu8045 4 года назад

Goog job

@X5Overland 4 года назад

Thank you

@carloscalderon7272 4 года назад

Easy but watch u f g fingers lol

@rokitman5753 3 года назад

Its called a skin sacrifice a good mech gives a little to the skin gods evey now a then 🚜

@X5Overland 3 года назад

Haha, exactly!

@christiankirkenes5922 Год назад

You have just genuinely saved my bacon bro

@lauracummings2008 6 лет назад

Fantastic video

@chariffaridCF 4 года назад

Thank you so much 😍

@X5Overland 4 года назад

You're very welcome!

@SpaceHamster11 2 года назад

Just did this on my 2017 Tiguan. Worked like a charm! I had OBDEleven specifically for this... and of course got an error message when trying to retract the electronic parking brake the "correct way". Thanks for the backup plan 🙂

@retomoto5060 5 лет назад

Jesli nie masz scanera to podlaczasz baterie pod zaciski 2kable i cofasz bez rozbierania a potem cofasz tloczek prościej i szybciej i masz gwaracje ze ow oring będzie nadal szczelny pozdro

@A_Renaissance_Man 4 года назад

Giving blood to the Gods assures the job will be done correctly.

@afraid_to_shoot_strangers8066 4 года назад

This is awesome 🤝🏻

@johnmichael1220 Год назад

Mate the quicker way around that was to start the engine realise the parking break then push back in life Is a little easier than taking all that apart and causing more work for your self

@steliandragomir6815 3 года назад

There’s an easier and safer way to release the parking brake. Just disconnect the electrical connection, take a 9 or 12 volt small battery with two cables and connect them to the receiver pins on the parking brake module. This way you avoud any potential damage by removing the module from the caliper. You can reverse the polarity if the piston starts to come out.

@X5Overland 3 года назад

Yeah, a lot of people have commented that. I haven’t done it myself but it sounds much easier haha

@maljar97 3 года назад

Thanks wery wery much. I will try on my Passat b7 2011

@Kai...999 2 года назад

I find this way easier. You’re literally removing two bolts and rotating a screw mechanism that drives the piston. It’s more simple than finding a 12V battery and wiring it up. If you got far enough to remove the caliper you probably have the tools to manually release the piston.

@djgq1007 2 года назад

I will try on my 2019 Jetta?

@daveblogs5019 29 дней назад

@@Kai...999a small 9volt battery also works. And 2 wires obv.

@hedley326 3 года назад

I know this video is a saver but will the piston not retract if you just switch the vehicle on and release the brake electronically? Or does it not retract enough. I've also found that instead of a c-clamp , a wood clamp is less harsh on parts. Great video though.

@gerfome 2 года назад

My car is a Renault Scenic. Has an electronic parking brake. I accidentally flattened the battery, and hand brake jammed on ( think a safety feature).. My grandson an apprentice mechanic, used a scanner , but could not release the handbrake. It gave a message " right rear brake fault". We think the cylinder has jammed that one on. Going to get the car moved to his garage, tomorrow,.Thanks for the video, most informative.

@hunter-5150 2 года назад

Thank you so much. I was about ready to start hitting my car with a hammer it was frustrating me so much

@gdechello7614 2 года назад

L O L I was just showing my son that you’re not doing it right unless you are bleeding. Hahaha great video thanks!

@Matty_1985 4 месяца назад

Does this exactly process work for the 2014?

@kevinmondragon8726 2 месяца назад

My exact same thoughts bro did you end up doing it ? I have the same year model. We tried to do it an couldn’t with a caliber tool twisting it but I’ll let you know by Sunday afternoon if it works broo

@SCARSOFEUROPE 28 дней назад

you can put a 12 volt loader on both connectors and turn it back

@thomasandersen9041 Год назад

Waow. Short, presis and just the right info, no jibb jabb. Thank you for this short and great info vid

@richardwallinger1683 5 лет назад

excellent video .. not nice to see you mash up your hand .. I did a similar , HOWTO LOOSE A FINGER end making a dial gauge holder on my Myford Lathe . sensitive plasters available from LIDL are super sticky and breathy . Every mechanic needs a box of them for the inevitable scrape . your electric driver is well powerful.

@paulthecarwhisperer250 8 месяцев назад

Do you need to wind back the piston or just compress with a c clamp? I’m trying to understand why sometimes people wind it back but sometimes c clamp works

@larrypeters2038 3 года назад

Has anyone tried doing the brakes with the car running while in neutral? Or maybe turning the car off in neutral? Does the motor only engage while in park?

@X5Overland 3 года назад

I haven't tried it but it seems like it may work. It may not pull the brake pads far enough out to change them though...i think when you release the EPB, it only pulls the pads back a tiny bit. You'd need more space in order to fit new (thicker) pads. If you do try it, let us know how it goes! =)

@raymundocarlos5790 2 месяца назад

You Made Look So Easy ...Perfecto .....

@kevinmondragon8726 2 месяца назад

Eso es lo que yo dejé

@shiemigagjuro 6 месяцев назад

There is much easyes way which I use just unplug power supply and conect the socket with a 12 volt power from other battery or battery charger ETC. Piston on caliper goes back and forward when you change + or - polarity.

@danbarefoot9133 3 года назад

Why can't you just put the vehicle in neutral with key in run? Haven't tried this yet myself to test the theory but makes sense to me and would save a whole lotta extra disassembly and reassembly.

@X5Overland 3 года назад

Sounds like it might work but I haven’t tried that.

@doca8792 2 года назад

Love the video. Absolutely hate electronic park brake. I have an OBD scanner that’ll do this, but your method is actually faster. Appreciate it.

@FLYESTCREATIONS Год назад

I dm you… 🙏🏽 hope you respond to your ig business page in need of some serious help

@AsianBlackR3501 4 года назад

In Mercedes 2015 CLA250, you can go to instrument cluster and scroll down to PADS REPLACEMENT and press OK. The caliper piston will be retracted by the motor.

@X5Overland 4 года назад

Thats incredibly helpful!

@sealoftheliving4998 2 года назад

Crazy Company of cars. Why they install Electronic Park Brake which is another investment if there is a problem. Unlike Manual Hand Brake there is no problem. It will last forever. Many times encounter with this idiot electronic park brake that it won't run the vehicle because the Electronic park brake won't function.

@abdullast3434 Год назад

Hi. My rear brake right side is stuck. The car moves and the parking brake releases normally. But the disk get very hot and smelly. What is the problem