How To Mix & Process Sub Bass (Mixing Tutorial)

Подписаться 125 тыс.

Просмотров 158 тыс.

50% 1

In this mixing tutorial, I will show you how to mix and process sub-bass. Mixing bass can be difficult, and the sub-bass is even more difficult because the low-end is so energetic. This tutorial will show you how to get the bass to sit perfectly in your mix, and allow you to get a tight and fat low-end sound. This is an FL Studio 20 tutorial, but the same mixing techniques can be applied to other daws as well, such as Ableton, Cubase, Studio One and so on.
The kick and the bass are two of the most important elements in your mix. Together they make up the foundation of your song and together they provide most of the energy in a track, and it's therefore very important that these elements are sitting right in the mix. You don't want any problems to occur in the low-end, because that's the best way to ruin your mix. You want a punchy and phat low-end with a lot of impact, and in order to get that your low-end needs to be mixed properly.
If you want to know how to mix low end then this tutorial is for you. This mixing tutorial will focus on bass compression, EQ, Resonant frequencies, Sidechaining, how to make the bass and other low-end sounds mono, and so on. In other words: Everything you need to get your bass to sit perfectly in your mix.
Check out part 1 here "How to mix kicks": • How To Mix & Process K...
☑️ Get Fabfilter Pro Q3 here:
www.pluginboutique.com/meta_p...
☑️ Get the LFO tool here:
www.pluginboutique.com/produc...
a_aid=5d496680b59cd
☑️ Download the free SPAN plugin:
www.voxengo.com/product/span/
Sidechaining explained: • Sidechaining Explained...
How to use traditional sidechaining in FL Studio: • How to sidechain in FL...
5 ways to sidechian in FL Studio: • 5 Ways To Sidechain In...
The easiest way to sidechain in FL Studio:
• The EASIEST way To Sid...
How to Sidechain using an EQ: • FL Studio Pro tip: Sid...
------------------------------------------------------------------
RECOMMENDED STUDIO GEAR:
(Amazon links below)
AUDIO INTERFACE:
☑️ Focusrite Scarlett Solo: geni.us/scarlettsolo-3rd-gen
☑️ Focusrite Scarlett 4i4 (3rd Gen): geni.us/scarlett-4i4
REFERENCE HEADPHONES:
☑️ AKG 612 PRO: geni.us/akg-k612pro
☑️ Beyerdynamic DT 990 PRO: geni.us/DT-990-pro
BUDGET MONITORS:
☑️ 5": Yamaha HS5: geni.us/Yamaha-HS5
☑️ 7": ADAM Audio: geni.us/Adam-Audio-T7V
☑️ 8": Yamaha HS8: geni.us/Yamaha-HS8
PROFESSIONAL MONITORS:
☑️ 7": ADAM Audio A7V: geni.us/ADAM-A7V
SUBWOOFER:
☑️ KRK 10S2 V2: geni.us/krk-10s2v2
MICROPHONE:
☑️ Audio-Technica Cardioid Condenser Studio XLR Microphone: geni.us/at2020microphone
☑️ Vocal recording booth/stand for microphone: geni.us/microphonebooth
XLR CABLES:
☑️ TISINO 35 ft Balanced XLR cable for mic: geni.us/xlr3ftoxlr3m
☑️ Monoprice 6 ft Balanced XLR Cable for monitors: geni.us/monoprice104761
SHORTCUT KEYBOARD:
☑️ Backlit FL Studio Shortcut Keyboard: geni.us/flstudio-keyboard
☑️Get The Complete Idiot's Guide To Music Theory Here:
geni.us/idiotsguidemusictheory
As an Amazon Associate, we earn from qualifying purchases.
--------------------------------------------------------------------------------
✔️ VST & Effect Plugins:
pluginboutique.com/?a_aid=5d4...
✔️ Premium Loops And Sample Packs:
www.loopmasters.com/?a_aid=5d...
--------------------------------------------------------------------------------
❤️ Support this channel on Patreon:
/ firewalkmusic
❤️ Support us with a one-time PayPal donation:
www.paypal.me/firewalkmusic
⚠️ Do you need professional feedback on your track? Mixing or mastering? Check out my gigs on Fiverr: www.fiverr.com/firewalk
00:00 - Introduction
00:21 - how to mix kick and bass in the low-end
00:36 - common mistakes when mixing bass
01:20 - how to EQ sub bass
01:50 - How to make bass mono in FL Studio
03:19 - Low-end sweet spots
03:32 - Adding extra low-end harmonics
05:02 - How to compress bass in FL Studio
05:40 - Human hearing and low frequency bass sounds
07:38 - The fundamental frequencies
10:38 - How to sidechain bass in FL Studio 20
11:40 - Control the kick tail with LFO tool to get a tight kick and bass
Follow FireWalk on social media:
/ djfirewalk
/ djfirewalk
/ firewalk_music
/ firewalk_music
📧 Other inquiries?
firewalk.official@gmail.com

Видеоклипы

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 346

@FireWalkMusic 5 лет назад

Check out part 1 here "How to mix kicks": ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Sa9jEey1c3o.html ☑️ Get Fabfilter Pro Q3 here: www.pluginboutique.com/meta_product/2-Effects/16-EQ/4957-FabFilter-Pro-Q-3?a_aid=5d496680b59cd ☑️ Get the LFO tool here: www.pluginboutique.com/product/2-Effects/33-Modulator/824-Xfer-LFO-Tool-Modulator-Effect?a_aid=5d496680b59cd ☑️ Download the free SPAN plugin: www.voxengo.com/product/span/ Support us on Patreon: www.patreon.com/firewalkmusic Want professional feedback on your track? Mixing or Mastering? www.fiverr.com/firewalk

@PivotLoL77 4 года назад

Wow cool ok thanks

@ProtonJamsProductions Год назад

Kool

@chrisperkins9709 5 лет назад

Honestly dude, you explain things in such depth yet make it really easy to understand. This is a truly outstanding video that I'm gonna refer to a lot when mixing stuff. Thank you!!!

@FireWalkMusic 5 лет назад

Thanks! Glad you found it useful. I always try to make things as simple as possible. :)

@One_of_Many750 5 лет назад

Chris Perkins Remember, Always Use Your Ears When Mixing, Not Your Eyes. This Is A Great Template To Start With, Making Adjustments To Fit Your Genre, And Personal Style.

@KTrill-xs2md 3 года назад

Yo bro I couldn't find the TP bass line in FL studio, 2:44

@chrisperkins9709 3 года назад

@@KTrill-xs2md It's not an FL Studio plugin but is a free VST you can download, just Google it 👍

@1Surinamer 3 года назад

This is an old video but for some reason i always look for tuts from Firewalk The way he explain not to long or not to quick. Just perfect! A great FL teacher! 👍

@FireWalkMusic 3 года назад

Thanks! Glad you like the videos! The great thing with videos like this is that even though they are not brand new, the content is still as relevant today as when they were made. If I were to make a video about this today, then I would have done it exactly the same way :)

@johnporf9546 5 лет назад

Hey man, great job on these videos. I remember months ago, I had great ideas but my mixing was so terrible that everything I made sounded like complete garbage. Then I found this channel and the results are freaking phenomenal. Your videos have helped me go from knowing nothing, to the point where I can produce some decent results. Thank you. This is by far THE GREATEST tutorial chanel for producers on RU-vid.

@FireWalkMusic 5 лет назад

Thank you, I'm very glad to hear that. That's why I started this channel in the first place, so it's great to hear that people find the videos helpful! :)

@vcross3424 4 года назад

i can say that after watch your (how to mix series )and this , my song finally start sounding like a song , thank you FireWalk, love your channel so much.....

@FireWalkMusic 4 года назад

Thanks! Glad you found the videos useful :)

@MaulikOfficial 5 лет назад

*Legend back with sick tutorials*

@FireWalkMusic 5 лет назад

Thanks! :)

@poindextertunes 2 года назад

Hey man, thanks for getting to the point. A lot of these YTers want to tell a story or act a certain way(loud and obnoxious) for views and I end up Xing the video 30secs in. Its nice to see a video thats not pretension. Time is money 💯

@JayThomasofficial 4 года назад

Omg thank you for this! Life changing . That frequency chart though! Thanks a million . Something big clicked

@FireWalkMusic 4 года назад

You're welcome :)

@Forwardslashhug 3 года назад

Wonderful and in depth. I love the sense of professionalism. Thank you very much!

@FireWalkMusic 3 года назад

Thanks! Glad you liked it :)

@chris8651 5 лет назад

you've drastically improved the way I handle my bass from now on, Thank you so much! This is incredible

@FireWalkMusic 5 лет назад

You're welcome! Glad you found it helpful :)

@chris8651 5 лет назад

Create an aux for you bass track and add the rbass plugin, set it to the root note of your track... go a step further and create another aux send from your bass track and set that to x2 the freq of the first Rbass for even higher harmonics. Mix the three tracks to taste paying attention to their combined.. then Smile

@needleinmyback 2 года назад

hi chris

@lukemurray5742 4 года назад

Just found these tutorials / Massive thanks for explaining things in a clear and straightforward way / This will help me a lot :)

@FireWalkMusic 4 года назад

You're welcome. Glad you found it helpful :)

@vineemusic 3 месяца назад

in the age where everyone is just making content for engagement its difficult to find such high quality content to learn from thankyou guruji

@HALOWEENTHER 4 года назад

thanks for this!! its very useful tips and amazing content full of knowledge and wisdom,subscribed!

@artificialmario 2 года назад

Solid. Thank you!

@Madrush1 Год назад

Great tutorial FireWalker, appreciate it to explain us all. Also i love the way we can see on the timeline the main titles so if we are in search for tsomething specific info we can fast forward to it.❤💯

@FireWalkMusic Год назад

Thanks! Glad you liked it 😀

@msgsaltsweet 5 лет назад

Thank you for great tutorials. Simple easy explanation gives all the necessary information.

@FireWalkMusic 5 лет назад

Thanks, glad you liked the video :)

@noahsmith4148 5 лет назад

The videos you make are great! Thank you!

@FireWalkMusic 5 лет назад

Thanks! Glad you like them :)

@paqiuman966 5 лет назад

These kind of tutorials... love them. Very helpfull

@FireWalkMusic 5 лет назад

Glad you like the videos! :)

@YannBula 4 года назад

you're so clear and straightforward, thanks!

@FireWalkMusic 4 года назад

Thanks, you're welcome

@jl9205 2 года назад

Some excellent tips here!

@FireWalkMusic 2 года назад

Glad you liked it! 🙂

@leslieatahumusic1330 3 года назад

Thank u so much!💯 This helped me so much, thanks once again.

@FireWalkMusic 3 года назад

You're welcome

@BluemountScore 5 лет назад

Interesting and rare infromation in here. Thank you!

@FireWalkMusic 5 лет назад

You're welcome. Glad you liked the video :)

@1BluvfreshBeats 6 месяцев назад

4 years ago I couldn't grasp this,4 Years later I'm saying ooooooh that's what firewalk talking about i get it now...on the flip side of this is help to those like me who love to have a punchy sub bass following your bass notes of a melodic pattern in your compositions

@VeljkoMarinkovic 5 лет назад

Thank you very much for sharing your knowledge!

@FireWalkMusic 5 лет назад

You're welcome :)

@W0lfm0ther 3 года назад

you are a legend thank you so much for sharing your knowledge 🙏🏾

@FireWalkMusic 3 года назад

You're welcome :)

@Darfail 4 года назад

Incredible tutorials thanks so much

@FireWalkMusic 4 года назад

Thanks, you're welcome :)

@DJVICTORIUS 4 года назад

Very impressive video an you explain all this things about bass ,this video really help me to sort out bass and kick Thank you!!

@FireWalkMusic 4 года назад

Thanks, glad you found it helpful :)

@haihy123 3 года назад

Great job, thank u for the help

@psychoandreas7096 3 года назад

This is gold 🥇

@FireWalkMusic 3 года назад

Glad you found it helpful! :)

@andybutane3176 5 лет назад

Great videos !!

@FireWalkMusic 5 лет назад

Thanks :)

@charlesmason538 Год назад

smart to hunt for frequency not in the scale, never thought about this!

@Drumvicious_ 5 лет назад

AMAZING tutorial !!!

@FireWalkMusic 5 лет назад

Thanks! Glad you liked it :)

@danielp7754 3 года назад

You're the best FireWalk, great advanced and easy to understand tutorial !!

@FireWalkMusic 3 года назад

Thanks! Glad you liked it :)

@KTrill-xs2md 3 года назад

Yo bro I couldn't find the TP bass line in FL studio, @

@FireWalkMusic 3 года назад

@@KTrill-xs2md Hi, it's not a native FL Studio plugin. I believe you can find the download link in the video description. It's a free plugin.

@deadlyyeet3360 2 года назад

This is gold, Thank you

@FireWalkMusic 2 года назад

Thanks! Glad you liked it :)

@Redemm 3 года назад

Great Video!!!

@FireWalkMusic 3 года назад

Glad you enjoyed it

@LarinYK 3 месяца назад

thank you for your tutorials, ive learned so much from watching your tutorials

@sewnixltdofficial7687 5 лет назад

Thanks man! I don't even have FL studio,I'm Presonus Studio One user but I don't skip single video from *FireWalk* . 🔥 👣

@FireWalkMusic 5 лет назад

Thanks, glad you like the videos. I know there are a number of people using other daws who watch these videos, so I always try to make my mixing videos and such relevant for everyone :)

@MusaDays808 5 лет назад

Lol, Same Here Mate. Except I've Been Loving & Using This #FLStudio Shit & It's Awesome 😉 I Now Use #StudioOne For My Vocals & For Mastering 🙂

@nebyusamuel7858 3 года назад

these videos are gems

@FireWalkMusic 3 года назад

Thanks, glad you found my videos helpful :)

@trancephile2412 5 лет назад

Perfect tutorials

@FireWalkMusic 5 лет назад

Thanks, glad you like the videos! :)

@horizonmusiic 4 года назад

Thanks dude! Really helpful!

@FireWalkMusic 4 года назад

You're welcome :)

@mikerimi3092 5 лет назад

tnx 4 tips....another good one

@FireWalkMusic 5 лет назад

You're welcome :)

@skygazer3696 2 года назад

The tutorial I want to know.. Keep sharing

@FireWalkMusic 2 года назад

Glad you liked it:)

@TheManishpatwa 3 года назад

iam an ableton user, but this video is so clear and precise and very informative.. great work..

@FireWalkMusic 3 года назад

Thanks! Glad you liked it 😊

@aqtaii 4 года назад

Great teacher

@FireWalkMusic 4 года назад

Thanks! :)

@prodcamb.2380 4 года назад

Helpful!

@FireWalkMusic 4 года назад

Thanks :)

@lucacamorcia6740 4 года назад

Thanks!

@FireWalkMusic 4 года назад

You're welcome :)

@SavBeatz97 3 года назад

I never though of the scale reference. Genius.

@FireWalkMusic 3 года назад

Glad you found it helpful :)

@Ekalavya_ 5 лет назад

Really great video. I got to know many things by this video. We thank you for putting in so much of time and research to help producers like us. I also am requesting a lot regarding mixing noise to EDMs. And it's importance. Please do make a video on that too. Thank you 😀

@FireWalkMusic 5 лет назад

Thanks, glad you like the videos, and thanks for the suggestion, I'll put it on my list. :)

@Ekalavya_ 5 лет назад

@@FireWalkMusic Thank you very much. I appreciate your help

@tebogolebona5879 3 года назад

Thanks you helped me

@FireWalkMusic 3 года назад

Glad you found it helpful :)

@HenningUKN 5 лет назад

Well, R.I.P my sleep schedule.

@chris8651 5 лет назад

you had one of those???

@HenningUKN 5 лет назад

@@chris8651 😂

@FireWalkMusic 5 лет назад

Sorry about that :P

@Thaofficialsensei 3 года назад

I’m tellin ya

@Nizzix075 Год назад

Well bro obviously ur doing it for improvement so props to you m8

@paulmark992 4 года назад

3:58 “If you google frequencies of notes” *uses Bing

@FireWalkMusic 4 года назад

You need to bing frequencies of notes :P

@paulmark992 4 года назад

@@FireWalkMusic :|P

@Wuffinmusic 3 года назад

Mate thankyou so much, exactly what i was looking for, my bass sounded so flat and not it sounds proffesional

@FireWalkMusic 3 года назад

Glad you found it helpful! :)

@Danoffsideofficial Год назад

Brilliant video this has helped me massively with processing my sub bass, i just wondered why you move the eq with low and hi cut to the bottom at the end?

@ViktorNova 2 года назад

Solid concepts. Though I would say that on the demo song on this video you don't really need compression because the notes never change, and you don't really need side chaining because your subs on the offbeat anyways and doesn't even start until the kick is pretty much gone and stops before the kick sweeps down into the sub region (and in many cases this can be accomplished more cleanly/simpler just by adjusting the envelopes on the subsynth)✌️

@slowpokeproductions 4 года назад

Great video tutorials here, and I don't even use FL Studio! Your voice is great...it's kind of a cross between the narrator for "How It's Made", and the guy who narrates "MotorWeek"!!!

@FireWalkMusic 4 года назад

Thanks! :)

@FrequencyFilthy 2 года назад

good video :)

@FireWalkMusic 2 года назад

Thanks 🙂

@yadavshashankkumar 5 лет назад

i can call this video "THE BEST FROM THE BEST"

@FireWalkMusic 5 лет назад

Thanks! Glad you liked it :)

@Joshua_Griffin Год назад

I've been turning these into Kshmr chain presets XD Thanks very much

@2190studio 3 года назад

Thanks for this video. Any video on mix levelling?

@FireWalkMusic 3 года назад

Yes, here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6mW_W2L9ado.html I have a whole Playlist filled with mixing tutorials :)

@livewireproduction2023 5 лет назад

That's my channel! Legend!!

@FireWalkMusic 4 года назад

Thanks :)

@DAW.G Год назад

I like how u explain

@FireWalkMusic Год назад

Thanks 😀

@zenith_journey 5 лет назад

Not sure if u touched on this but I’d like to add something that is pretty important for low end. Don’t use plugins that make everything go to mono by summing the left and right channels. E.g. don’t set the low end band of ozone’s imager to 100% narrow. Because if there’s side info it’ll just sum it to mono and sound bad, so u haven’t achieved anything. I think the safest way is to just use mid side eq and do a high pass of the side frequencies. Great stuff!

@FireWalkMusic 5 лет назад

That's true, but in this case we're using a sub bass, which in most cases are just a (more or less) pure sine, and those don't tend to have much side information, so it won't change much when summed to mono. In other cases though, you're better off just putting the ultra low frequencies in mono and then let everything else be spread out a bit. :)

@2rawforabaggie_ 2 года назад

Thanks

@FireWalkMusic 2 года назад

You're welcome :)

@Streetwisedj 4 года назад

Very clear, thanks! Can you also do a video on mixing 808's?

@FireWalkMusic 4 года назад

Thanks. It's on my list, but I can't guarantee when it will be

@AshishRaturi 5 лет назад

4:04 You can Find the Fundamental frequencies in parametric EQ by right clicking a Band and Selecting Key......

@FireWalkMusic 5 лет назад

I know. But I generally find it easier to just use a list rather than load another EQ and then start menu diving to find all the frequencies, besides, I wanted to show the coloration between frequencies and notes. There's also a lot of people watching these mixing videos who's using other daws than FL Studio, and for that reason it's usually better to use simple tools that everyone can use, and not just FL studio owners :)

@djdeto7382 5 лет назад

Noobs producer watches tutorial of pros and pros watches from fire walk So I just watch directly yours ;)

@FireWalkMusic 4 года назад

Haha :D

@termostatmusic6363 3 года назад

Thankyou

@FireWalkMusic 3 года назад

You're welcome :)

@ryanpwm 4 года назад

Wow I feel so dull. I've been mixing for 7 years and I EQ in all sorts of ways, but for some reason I always was trying to get my sub bass to be cleaner through heavy handed notches. I just didn't even think of lightly touching up the fundamentals. Facepalm.... thanks!

@FireWalkMusic 4 года назад

It's not always needed. However, for basses that sounds a bit "detuned" or that just doesn't sit quite right with the other sounds, this trick can make all the difference :)

@premchristopher6119 3 года назад

Thanks Firewalk! I like your example of the frequency identification based on the Key of the bass and then boost while taking the ones that are not in the scale of F. This was fine for the dance beat, how will it work for example on a song in the key of F, as there are many chords that will apply in a song For eg. F, Am, Dm, A#, C as a normal progression? Which frequencies do we work in this case?

@DubFanStep 4 года назад

Hi! Nice tutorials you have made. Could you do tutorial with maximus? I have used it a lot but I still feel like you could open it´s secrects in short tutorial.

@FireWalkMusic 4 года назад

Thanks! Yes, I have more videos about maximus planned.

@crazyjoe2270 4 года назад

Hi mate. 08:08 How do I know what frequencies ARE NOT in my scale? Thanks & keep up the great work!

@JayThomasofficial 4 года назад

Can someone help me figure out /learn more about what is happening at 7:47 -9:27 please . I get the idea but I have little to know practice , know how or how to know which frequency aren’t in f minor etc . The frequency chart from earlier im guessing ( along with a graph/ chart showing the f minor keys etc ) is how I can more or less how I will figure out by process of elimination which of what notes ( I don’t know how well or NOT I’m explaining this LOL. ) are technically in or not in f minor-- looking forward to practicing this ASAP-- I cant wait to watch more of your channel . So glad I found this and you !! ( I’ve never full grasped some stuff in this area of producing . You have the perfect way of explaining it more my brain . 🙏 grateful !! Thanks again.

@FireWalkMusic 4 года назад

There are helpers in the piano roll to show you the various scales, which will then be indicated when choosen. You can also download midi files to help you, by making ghost notes, and you can also just google any scale, like "A minor scale" for example, and it will tell you the notes in that scale.

@JayThomasofficial 4 года назад

Thanks so much !!!

@pogchamp7983 3 года назад

There's a preset for setting mono bass frequency in the Patcher plug in within FL Studio also btw.

@FireWalkMusic 3 года назад

Good tip! 😀

@anthonyfcollins 4 года назад

Hi. Thank you for such an insightful and genuinely useful tutorial, very much valued. Subscribed. Please could I ask, with regard of removing unwanted frequencies of the sub bass (in accord with the musical scale), how would you adapt this technique such as when the sub bass is not just a constant as it is here, but say if it is a pattern/shifting etc? My guess is automation with the EQ’ing that tracks the corresponding note changes, unless there’s any easier method?? Thank you guys kindly

@FireWalkMusic 4 года назад

The idea is to just make small subtle changes to make the root note sound good. By removing frequencies that's not in the scale, it shouldn't interfere with any of the notes in the scale but will instead help to make it sound more in key overall. I wouldn't use this technique on leads for example, but for a sub bass with low frequencies it's no problem.

@anthonyfcollins 4 года назад

@@FireWalkMusic Thank you very much for the reply and advice duly noted!

@mahmoudassran6503 5 лет назад

🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

@FireWalkMusic 5 лет назад

Thanks :)

@justarandomuseronyt1065 3 года назад

super detailed video!!! I have a question though.When you took out the unwanted frequencies and boosted the frequency which is in the key,what will I do in the situation where I have a bassline consisting of more than one note?

@FireWalkMusic 3 года назад

Hi, it's the root note, and the corrections are minor so you shouldn't have do worry about it. If you want to know the key of a track just by listening to it you could use a piano and start pressing keys constantly while the chord progressions go by. Once you find the key you can press constantly, and it sounds good regardless of which chord is playing, you've most likely found the key of the track. Therefore, boosting the fundamental frequencies of the root note, and taking out some of those that's not in the scale won't have a negative effect when the notes change.

@N1K5TA 5 лет назад

Fl stock plugins will give you the same result folks.. eq (boost and cut) then FL waveshaper for light saturation then another eq to remove some of the higher harmonics added from saturation then a compressor/limiter to control the volume and give it a light glue...sidechain with grosssbeat. learn your DAW stock plugins they might not look as fancy but they do the same job😎👍

@FireWalkMusic 5 лет назад

FL Studio have some great plugins to begin with, and it's true that you'll be able to get most things done with the stock plugins. That said, some third party plugins can offer things that the stock plugins can't. For example the Pro Q plugin offers 96 dB pr octave slopes, which is ideal for reducing resonant frequencies and such. PEQ2 can't produce slopes that steep, so you'll end up taking out a much wider frequency range. In terms of compressors, they all basically do the same thing, but there's still much difference in how they sound. Some emulate analogue gear and add warmth that others don't and so on. In the end of the day though, we're all different and we all perceive sound differently, so I always tell people to just use whatever plugin they like. :)

@N1K5TA 5 лет назад

@@FireWalkMusic do a blind test using stock and 3rd party plugins ...99% of punters wont notice and the other 1% wont care ,,,I have used most and yeah the fancy ones can get you there quicker sometimes ..there is no right or wrong in the tools used to be creative...use what you like, Im just letting the young producers out there know(probably your main demographic )that are on a budget.... they don't need to buy the latest vsts with all the bells and whistles to produce good music ...luxury not a necessity 😉👍

@pete4463 4 года назад

I was really digging the video until I saw you use Bing at around 4 minutes.. Had to leave after that. lol jk phenomenal video, you're a great instructor.

@FireWalkMusic 4 года назад

haha :P Actually I use Chrome as my default browser, but it's so messed up with all kind of crap so I decided to use explorer for the purpose of this video, since it's nice and clean :D

@Aisongs4You 4 года назад

Which main level should the main bass be when i eq it i usually have it on 12 DB

@sammpaul 5 лет назад

Thanks for the tutorial. Could you also make a music theory tutorial?

@FireWalkMusic 5 лет назад

You're welcome. This is planned, but I'm not sure when it will be yet.

@sammpaul 5 лет назад

@@FireWalkMusic Ok

@mikedevey2748 5 лет назад

great video, couple questions. When using EQ to remove some of the notes not found in the scale, what happens when the bass is playing a different note, as the EQ is static, would it cause any of the other notes to sound worse? The other question is when adding LFO tool to the kick, because your cutting off the end of the kick would you then need to reintroduce sub content? Thanks!

@FireWalkMusic 5 лет назад

Presumably you'll be using notes that's within the scale you're in, so lowering harmonics that's outside of the scale shouldn't interfere with any important tonal frequencies. This will ensure that the sub bass sounds more in key overall. Regarding the kick, in this case the lfo tool only removes the last part of the tale from the kick, so no important low end content is lost. This avoids overlap between the kick and the sub, and creates a stronger low end overall.

@femibrooks 5 лет назад

Question! When iam recording vocals, fl Studio randomly chooses the track to record to on the playlist, can " I " choose a specific track to record to on the playlist??

@FireWalkMusic 5 лет назад

You need to make a new (empty) pattern first, then insert that pattern into the playlist and press record. It will then be recorded into that pattern.

@SidMassiveXM 5 лет назад

It's cool how you EQ precisely to the notes depending on the scale, I just wonder how analog producers from the 80s and 90s did it without fab filter!

@FireWalkMusic 5 лет назад

They didn't. Modern music production can' really be compared to the way it used to be. Even the pros didn't have access to the kind of processing and tools the average bedroom producer has today. Back in the early days there was no EQ at all. If you listen to some old trance classics from the 90's and compare them to modern tracks, you'll hear that they lack crispness and sound a bit muddy overall.

@cody42693 5 лет назад

@@FireWalkMusic Woah, what? There seriously was a time in electronic music where there was no EQing?

@carlok6949 5 лет назад

Hello, can you please make a tutorial on how to fit pad in the mix nicely and getting pad level right?

@FireWalkMusic 5 лет назад

I might just do that. In the meantime, I do have a video on how to EQ pads: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BL4TxGUDu9Y.html

@liamsarmell2775 Год назад

You should show us how it sounds with the RBass and without it at the same volume (Since we perceive louder sounds to sound better)

@liamsarmell2775 Год назад

RBass makes your low end less deep but makes it mores clearer in the midrange. The deepest base you can get is an unprocessed Sinewave

@soteria. 5 лет назад

Takker og bukker!

@FireWalkMusic 5 лет назад

Bare hyggelig :)

@christiensebastien2442 5 лет назад

And what is the processing order for saturation? Should I put my saturation plugin before or after the compression? It seems to make more sense to put it after, but I have no clue what the proper technique is.

@FireWalkMusic 5 лет назад

The order of the processing is important and produces a very different result. Generally, when it comes to plugins before or after a compressor the general rule is the same as with EQ, when you place it before the compressor it generally produces a warmer and rounder sound, but when placed after the compressor it often produces a cleaner and clearer sound. It all depends on what you're after. :)

@digoo4942 3 года назад

How can i do surgical eq when there is no high peaks only there is smooth curve peaks in sub bass??

@KaMui1987 4 года назад

Hey, first: thanks for the tutorials - they are great! :) I just have a (maybe dumb) question regarding TP BassLane: couldn't you just put it on the master in the end of the mix and set it to like 100hz? So that you have every frequency in this spectrum in Mono?

@FireWalkMusic 4 года назад

There are no dumb questions, just dumb answers. :) At least that's what my mom used to tell me. Yes, you are correct. You could do that. you usually want different things to have different amount of mono information. It's generally a good idea to make sure that everything below 80 hz is mono, so in that regard you could use that on the Master. However, you want various other elements to have everything below say 200 hz in mono, and some things 100 and so on. There's no harm in doing both :)

@KaMui1987 4 года назад

@@FireWalkMusic Thanks for the response! Haha, my mom used to say that, too. I think I just wasn't sure and thought it might be a drastical thing to do. :) Ah ok, that does make sense! Overall I really want to thank you again. You answered a lot of questions that I had when it comes to mixing. I wish you all the best for the future and keep the high quality content that you deliver. Greetings from Germany/Berlin! :)

@FireWalkMusic 4 года назад

@@KaMui1987 Thanks! Much appreciated :) I will!

@TheSlayeRaul 4 года назад

Like !

@FireWalkMusic 4 года назад

Thanks :)

@Suchitttt 5 лет назад

Nice, any tutorial about what quality should be send to Spotify ,iTunes ,beatport, they have different file format and different peak level,label distributer only want 1 single wav file. So how the music streaming site process my audio.thanx

@FireWalkMusic 5 лет назад

Good suggestion, I'll put it on my list :)

@studioonewrld 5 лет назад

Hi, can you please make tutorial on how to make a mixing template for beats, (kick, 808, clap, snare, hi hat, open hat, percs & more)? Would greatly appreciate it. Thanks.

@FireWalkMusic 4 года назад

Thanks for the suggestion. It's on my list :)

@mbonar2694 3 года назад

bass doesn't always have to be mono! stereo bass done well can sound soooo sweet :)

@FireWalkMusic 3 года назад

There are no rules in music. Whatever sounds good. :) The general consensus is that sub-bass should usually be in mono in order to sound good in clubs and such (to prevent phasing etc.), but there's no rule that says you CAN'T use stereo on the sub-frequencies under any circumstances. :)

@qnodoubt9354 4 года назад

Best RU-vid Musical learning chanel by far!!! Hit that thumb if you agree with me

@FireWalkMusic 4 года назад

Thanks! Much appreciated :)

@NghiaHoang-pz9qp 5 лет назад

thanks you FireWalk,, I can replace ''renaissance bass" with something ? Because I don't have it :(

@FireWalkMusic 5 лет назад

Yes, there are many similar plugins, like the loair plugin for example

@ishmorris9888 Год назад

would you still suggest R Bass doe sub enhancement or something newer?

@mukulkataria9128 3 года назад

What about adding a saturator on the bass for fattening and adding harmonies.

@FireWalkMusic 3 года назад

This is often done on mid bass. It can also be done on sub bass, but in that case I would probably split the bands

@shizumaruofficial 5 лет назад

I am adding a cinematic-like stereo bass drop for an interlude section of my instrumental metal song, where there are no instruments playing. 1) Should I convert it to mono, in my case? 2) Should I do a low and high cut as well, just like in your tutorial?

@FireWalkMusic 5 лет назад

I would convert the lower frequencies (below 100 hz) to mono and leave the rest. In such cases where you have just one bass sound playing (or very few sounds) then I would not bother to low cut the frequencies, because it would sound thin. The low and hi cut is there just to make room for everything else in the mix. When there's nothing else in the mix, you can leave it. Just add some automation instead so that you enable the low and hi cut again when the quiet part is over.

@shizumaruofficial 5 лет назад

@@FireWalkMusic Thank you, sir! Much appreciated.

@tiredextremely 3 года назад

As an amateur musician, I'm competent with writing melodies and drum patterns and such, but trying to learn this kind of technical work feels impossible. Even after re-watching slowly, it's hard to understand the what and why of any of this... I'll keep trying, I just felt like I needed to shoot that thought into the world.

@BRIANROSER 3 года назад

It gets easier in time. Your brain is a neural network remember that. All you have to do is keep feeding it this information and it will subconciously figure out the what and the why's. You only ever realize this conciously in hindsight, after your brain figured it out already. As per frequencies, think of each sound you select as a jumble of frequencies that sound good in itself, a good sample will always sound good on its own. But since you're creating a track that is a mix of many different sounds, to get the cleanest and best possible mix you will need to cut and add frequencies of each sample so that they fit together as a whole. This way you end up carving a "single" sound that is your track, made from carved and cut sounds and samples, all fit to sound well together.

@dgermany030866 3 года назад

oh my God I totally agree with you. I have been trying to understand this for years losing my mind!!! This is no help either

@1Surinamer 3 года назад

@@dgermany030866 i know what you mean and i miss the explanation about the what and why. But there are other videos that explain things. now i know about compression a little about frequencies so i slightly understand this video. And now i have to watch other videos what side chaining exactly is. And if you understand all the ingredients come back here and make the cookie. If you got a little bit understanding about things i will assure you that this teacher will teach you how to do what you want.

@dgermany030866 3 года назад

@@1Surinamer okay ur right