How to Mod an AR Bungee Mag Pouch to a Fast Mag Pouch 

Very clever cheap solution . thank you guys. I hope you find more handy tips

congrats, you have successfully made what was essentially the prototype for the HSGI taco. BUT AT A FRACTION OF THE COST

I showed this to a bunch of guys in my unit (We're Infantry) and you solved a lot of our problems we had with those same magazine carrier's. Thank you brother!

3:26 is when the tutorial starts

as a cinematography student, I can say that the production quality of your videos is top notch. you guys should easily have 100k+ subs

Hey guys awesome video. I just did this with one of my pouches. Although on the subject of kydex pouches so you guys can be aware of why they didn't properly work. First off, most kydex mag pouches are super tight because so many mags have different shapes. You are supposed to actually heat them up and then fit your mag inside. As they cool they form for your Mags. Secondly, they are really meant for real use, so the weight of the PC is a big part of how they work. If you aren't running training plates (5lbs+ per plate) you will lift up your PC, but if you have the weight it will give you more leverage on your pull. So if you heat them up and have some weight behind them the kydex pouches are phenomenal. If you still have them you might wanna give my advice a try so the investment isn't a complete loss. About the insert coming out of the pouch, its really a manufacture quality and retention at that point.

Probably the cheapest yet most beneficial tip I've come across! Playing airsoft, I had some pistol mag pouches with almost no retention and the bungee kept sliding off of the mags, so I was afraid of losing them. This solved my problem perfectly! It worked great, even tough the two pistol mag pouches were joined together :)

This just might be the single most brilliant solution to our mag pouch needs. Well done.

Hey guys I Just whant to say that am I wery happy because this small airsoft RU-vid scene has got these two experts and I hope this Channel Will had 1 000 000 subscribers one Day and I have one request can you start making video twice a week because for my and other 1.1k of People One video per week is a bit. Your big fan Vedran OUT

Don’t know how I never saw this video before. This is perfect for what I’m needing awsome again guys 👍🏻

Now that works better. I'll send back new ones today.

Thanks for the tip. Just did this mod to my bungee mag pouch, saved some money and have the same feature of a fast mag pouch. Very underrated airsoft channel, hopefully you guys will get more attraction in the new year.

You guys deserve much higher ranking. 2 experts soon to be discovered By many more. Keep it up guys, you Rock 👍🏻🔥👌🏻

Man you guys deserve WAY more subscribers. You guys are so informative! Keep up the awesome work, it's only a matter of time before y'all's channel takes off.

Great idea! Thank you!

This is very helpful to me. I finally stepped up to the SSR15 DMR build to replace my cancer tactical gen 2 and got a chest rig I’ve been trying to properly set up

Pretty damn clever solution. I definitely like it. Great job fellas.

This is genius, well done guys. My pouches hold 4 MP5 images or 2 or 3 M4 mags. I've always used velcro flaps, which yes they make a noise, but when in action your gun is loaded, so once you've fired enough rounds to change mags under fire, the enemy typically have an idea you're there. If I switched to single mag pouches tgus would certainly be something I would do, but I tend to operate with 9 magazines usually as standard.

Impressive how the best solutions are usually the simplest. Thanks, man. God bless you

Brilliant. Thanks a lot for this!

Amazing vid. Not to mention a awesome looking gun hanging in the back ground. Love the paint job on everything. Amazing

Simple, cost free and effective - You got to love it :)

Thanks. This helped a lot in making my double mag pouches hold my mags better in place

Good job guys. Been doin this for years. Got the idea from ats. If you run it through the middle molle seam. Itll hold tighter. Atleast thats how i do it on my tac tailor triple mag pouch. Note that: the bungee is more susceptible to damage cause its in the open (ie if you get caught on a branch, etc.) but i also run a double bfg ten speed over it. Rarely put 2 extra mags in the bfg. But lies flat when not in use.

omg this is nice i am going to do this to my pouches. thanks guys

Older video but only just watched this today. Already converted all my mag pouches this way and I'm in love. I be to lazy sometimes to buy the real good stuff. And broke lol

wow that's smart thank you, gonna try it for sure

Wooooooow!!!!!! Thanks for making this super simple mod known since I have tried to make up my own plastic inserts to no good success. I will be saving money over spending a bunch. THANKS FOR THE ADVICE!

Great tip. Thnx !

Great help. Hope that during actual combat it doesn't fall when crawling. Good job! Appreciate the new idea.

Thanks. I am going to try this.

God I love this video. I show this to my infantry boys. Good man.

Cool mod. Thanks.

soooo good i watch now like more than an hour to find a good vid for moding my bungee pouch and HEAR IT ISSS !!!!! THX

Great video. Very good trick

Awesome video bros!

Niiiice tip! Thank you guys!

kill it with the tips! cheers

Great helpful video. Thanks 👍

Clever cheap solution, thanks

Very good hack, thanks

Good info

Awesome!

damn your smart AF, why haven't I thought of this! great work!

This is even a better solution than buying fastmags! With this you can decide what type of mag you need based on the scenario. I was going to buy fastmags from TT but now i think i will buy the bunge ones and change them to fastmags whenever i need. You just increased the modularity of TT products. They should pay you :D

About to take this one now for all 4 of my mag pouches! Great tutorial, and an awesome solution. Now I don't have to buy the Tacos! Thanks for putting this out there!

Ik ga dit zeker proberen! Thanks!:))

I tested it out. 1. My cords were too short to do it like in your video. So I didn’t do that last threading, and they were still a little too short 2. Yes, I got it to hold a loaded mag but after trying to fine tune it putting it back in; it was difficult because the fabric was bunched up. If I had a longer cord and a clip like y’all do, I can see it working.

Well you just saved me a few hundred dollars thank brother

very good solution, but i tried this on condor mag pouches and it didn't worked out at all as intended cuz condor pouches are way softer than your tasmanian tiger pouches

If you have a flap pouch with velcro instead tuck in the flap its really simple and holds mags well

is it possible to do this on a triple mag pouch? and if so can we get a tutorial since that is one of the most popular mag pouch formats. the one in this video is too fast to see clearly what you are doing even on 0.5x speed

Damn imma do this now

You only show how to do it with a single mag holder, but I see you have it set up for 2 on the left, your right. How do we do it for three and two connected mag holders?

That's great that more affordable way to taco pouches.

can u use these to fit ak mags ??

What kind of clips are those again?

How can I do that with a vest that has them built into it? I can’t take my pouches off 😩

The problem is that I have three pouches stick together so i can't do this and now I don't know what to do. Can you help me?

Looks like a great mod. Is there a way to do it for the pouches that are joined to each other as a triple?

Hey, does anybode here know, if this will work for different mag-sizes? I want to build a chestrig which can hold G36 and M4 Mags - do the larger G36 pouches still hold m4 mags with this mod?? I know i could use the TT - fast mag pouch, but i want to have 5 rows of molle on the outside, so i can still mount an admin pouch infront of my mags. And any "fast - pouch" only has 4 rows, so i thought this trick could be the solution. would be greatly appreciated if someone shares his experiences. :) edit: the g36 mags are "cleaned" so those connectors are gone

Fuck that's clever! Really good tip! I would love a video showing how you do this but not in super speed! I know it's probably very easy but I'm not very used to do all of this stuff. Maybe you can upload the video you used for this video but in regular speed? Thank you either way!

Can you give me a link to the plate carrier and those pouches you're wearing in the video?

Where can i buy this inserts?

I'm looking into kydex rather than elastic retention just to keep things sleek. Would there be any problems with importing Esstac Kywis into Belgium if you wanted to?

Will this work for the pouches that have a pistol pouch attached on the front?

Hello! Do you think this could work on triple mag pouches as well? Maybe linking the middle ones together and the extremities to the back molle? If anyone as done it I'm waiting to hear about it. Cheers!

Is there a similar way for Mag pouches that are sewn together?

Do they mag fast mag holders for belt set ups that fit galil 556 rock and lock mags

Would you say this modded mag pouch is better/more efficient than a purpose made fastmag pouch, you showed at 4:52?

what size of shock cord are you guys using? I'm looking at 1/8 inch but I'd like to be certain

Are those airsoft mags or real mags? I'm curious about the weight to retention ratio of airsoft vs real.

You can heat up Kydex with a hair dryer to Lighten the Tension.

Can you do this on triple mag pouches?

How did you tie the double one!?

Cool but i have a triple mag pouch and yea i can't aplicate that

How can you do it with a triple molle mag pouch? Thanks

do they fit ak74 mags after the modification

Is there a way to do this with in-built pouches? If so how? I can send you a photo of it if needed

How to do like this with my triple bungee magazine?

Great video great tip. Here some advice... i got carried away looking at your skilked armswinging, pointing and what ever you wre doing there. It will improove your vids if you manage to get rid of that habit. Its contraproductive and distracting.

I have double mag pouches. Can this still work?

is there any way to do this on a triple mag pouch?

They never showed that the mags were loaded (which would be a lot heavier) when they did the shake test. Has anyone tested this with loaded mags???

what brand is the mag pouch?

What brand pouch ?

Why did you put the most important part in fast motion..

Can this be done with a 6 mag m4 pouch

or just buy the elastic pouches edit: nevermind you cant put the mags back in

Video starts at @3:20

now do it with loaded mags ;)

Video was too fast to pay attention how you set it up… good thing RU-vid can slow the speed down

3:35

holy shit go faster next time - good vid though - trying it now

sadly for airsoft I use an ar mag pouch that has 3 sewn together

Need to do new video on how to tie pouch and don't fast forward the process this video is very hard to understand how to tie!!!!!

So, is this whole fake Russian accent supposed to be the new and improved FPSRussia?

What's the accent? Sounds slavic.

Will this work on a triple mag pouch

does this work with double mag pouches?