in this video I show you how to install a bl touch very easily! read the description carefully !!!!!
👇 Scroll down the description for links and info! 👇
Attention !!! There is a new firmware version for the bl touch v3 so you don't have to remove the c7 capacitor anymore !!!!
And in the download file there is the ender 3 pro it does not matter if you have normal there is nothing that changes in the firmware, it is only the structure !!!
Subscribe, share, and like! 👍
don't forget the little comment too! ⌨️
🔗 video link: 🔗
Bl Touch:
fr.creality3do...
file with software and firmware:
www.dropbox.co...
or
drive.google.c...
First layer test: www.thingivers...
.................................................. ...............................................
Gcode to copy paste instead of the old one:
; Ender 3 Custom Start G-code
M140 S {material_bed_temperature_layer_0}; Set Heat Bed temperature
M190 S {material_bed_temperature_layer_0}; Wait for Heat Bed temperature
M104 S160; start warming extruder to 160
G28; Home all axes
M117 Auto Level GO!
G29; Auto bed-level (BL-Touch)
G92 E0; Reset Extruder
M104 S {material_print_temperature_layer_0}; Set Extruder temperature
M109 S {material_print_temperature_layer_0}; Wait for Extruder temperature
G1 Z1.0 F3000; move z up little to prevent scratching of surface
G1 X0.1 Y20 Z0.3 F5000.0; move to start-line position
G1 X0.1 Y200.0 Z0.3 F1500.0 E15; draw 1st line
G1 X0.4 Y200.0 Z0.3 F5000.0; move to side a little
G1 X0.4 Y20 Z0.3 F1500.0 E30; draw 2nd line
G92 E0; reset extrude
G1 Z1.0 F3000; move z up little to prevent scratching of surface
M117 Come on Printe my beauty!
; End of custom start GCode
.................................................. ..............................................
🔥 Subscribe here: bit.ly/3b1gNvB 🔥
🔊 Join the discord: bit.ly/39ZSOge 🔊
🔵 Joined FB group: bit.ly/3bapCDv 🔵
💜Join my Instagram: 3d_zack 💜
💲 If you want to support me: 💲
💚 utip: bit.ly/3da61or 💚
❤️ Tipee: bit.ly/38Y9dAj ❤️
💙 Paypal: bit.ly/2Qorr7K 💙
💛 wishlist: amzn.to/2w7fn41 💛
💜 alliexpress wish list: bit.ly/2IVmy1N 💜
🖨 My printers: 🖨
✔️ Ender 3: amzn.to/2xPIfOJ
✔️ Ender 3: amzn.to/2xPIfOJ
✔️ Ender 5: amzn.to/2IQYvRA
✔️ Wanhao D9 400: bit.ly/33BOscV
✔️ Orange 30: amzn.to/2Qosk04
📩 for any commercial request: contacte.3dzack@gmail.com 📩
🎥 A big thank you to ThomyBro for the assembly do not hesitate to support it: bit.ly/2QqM3vY
23 авг 2024
