How To Mount Multiple Swags To A Board 

I was thinking the same thing. Velcro or a pole mount would allow for cleaning.

You can add more swags or make the swags wider! It all depends on the width of your pattern and what you would like your valance to look like.

Hey Scott I need a lot more help then what I thought I did I went to your site and can’t find patterns

+craftymom7 The swag patterns I make and sell on my website take a yard (36") give or take depending on the drop. The jabots depend on the length you need. Example: 34-1/2" long + 1-1/2" sewing allowance = 36" x 2 (for a pair) equals 72" divided by 36" = 2 yards

+Scott Weaver Hi, thanks so much for your reply. I truly appreciate your help. I am trying to recreate a custom swag and jabot valance , that I have, but the material needs updating. Please let me know if your patterns can help me, here are the measurements: The board is 126 in long and 8 in wide, 5 swags each are 42 in wide at the top and hang is 16 in. ( They overlap from left to right. ) Jabot ea, are 37 in long and have 12 in of pleats across and 8 in plain material to wrap around . The material is a good weight, not sure what it is tho. Thanks,

+craftymom7 Hi Again! Yes I make these sizes all the time and if you like please go to my website and find my email address so you can send me a picture of what you have and your address so I can figure shipping charges. 29.99 for the swag pattern and 19.99 for a pair of jabots. Both are fully pleated with the folds slightly pressed for pleating memory. Thank You, Scott www.factorydirectdesignersworkroom.com

You do a video how to hang it