How to Mount Shred Lights on Meepo Envy & Voyager | EASY SKATEBOARD LIGHTING INSTALLATION

Подписаться 6 тыс.

50% 1

In this video I'm going to show you how to mount ShredLights onto the Meepo Envy electric skateboard. This method also works for the Meepo Voyager, and the updated Meepo V5 electric skateboards. There are little plastic clips on the cables that connect the motors to the ESC on the Meepo Envy and Voyager. These clips really get in the way if you're trying to mount ShredLights to the back of your board, but there is a recommended solution from ShredLights and that's what I do in this video.
I no longer recommend buying Meepo boards, and I'm not linking to them on my channel. If you would like to know why, you can watch my review of all of the issues I've had here: • Why I do NOT recommend...
You can buy any ShredLights and any mounts you need through my affiliate link here: shredlights.com?aff=281
Use code: RONAN10 for 10% off any ShredLights product.
And, if you want to buy my Nobleman K2 helmet please use my affiliate links:
Nobleman K2 helmet:
www.noblemante...
Nobleman site:
www.noblemante...?sca_ref=1315791.X4eASQlLum
You can also get a 5% discount on the K2 helmet, or any product Nobleman sell by using my discount code: ronan5
Thanks for watching, and please subscribe.
#shredlights #MeepoEnvy #MeepoVoyager #electricskateboard #eslate #eskatereview #irishtechreviewer #IrishRU-vidr #NoSmallCreator
FOLLOW ME ON
Twitter: bit.ly/3j8m0Gk
Instagram: bit.ly/32ZUHIy
Car Instagram: bit.ly/341EBgL
Facebook: bit.ly/3i0r2mR
♫Music♫
Artist: Dyalla
Track: Ebb and Flow

Опубликовано:

16 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 7

@ronanhutchinson 5 месяцев назад

I no longer recommend buying Meepo boards, and I'm not linking to them on my channel. If you would like to know why, you can watch my review of all of the issues I've had here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qXOF2Iiwskg.htmlsi=K06kUWIoZbxIQC72

@eBoard3R 7 месяцев назад

*Took the cable holders off my board to replace the thick riser on my Flow with thinner risers.* ⚡️🤟🏽🤟🏽⚡️ I got some cable holdin bits from someone's old Evolve board to hold down the cables in the back of my board, works well. Similar stuff on amazon/aliexpress Nice video dude 🤙🏽

@ronanhutchinson 7 месяцев назад

Cheers bud! Glad you liked it. Do you find much of a difference on the Flow with the lower risers?

@eBoard3R 7 месяцев назад

@@ronanhutchinson I've always preferred havin a board as low as possible, definately changed the ride feel, more fun and less divey due to havin less leverage over trucks. Stock one is 10-12mm plastic, I replaced it with 3mm cork. I dont ride super loose trucks so no wheelbite. My other mini I use thick+thin so comes up to 8mm, due to clearance issues. Worth experimentin to see what feels right for you. Thinner risers or wedge riser in back to de-wedge.

@ronanhutchinson 7 месяцев назад

@eBoard3R great stuff! Yeah I’ve made tweaks to most of my boards. I actually recently got an old Boosted V2. I swapped the deck for a brand new one cause I accidentally got it run over by a car just after I got it 🥹🥹 and I’ve put new wheels and bearings on it too. It’s setup pretty much how it would have been from Boosted and I love it. Haven’t tried the new deck and wheels yet though cause the weather’s been too wet 😒😒

@eBoard3R 7 месяцев назад

@@ronanhutchinson I saw that, I thought you got lucky cos you were ridin it after and it was seemingly fine. Well, at least the electronics were fine, Boosted boards still warm me cockles, the one that made esk8 more accessable, look forward to seein more of it on the channel, keep on top of RLOD with an Amnesia chip and you're good. Not sure who does Amnesia in UK/Europe but maybe the facebook boosted uk group would know

@ronanhutchinson 7 месяцев назад

@eBoard3R it actually was fine. But I had a truck snap on my Envy… I’m gonna be doing a video about that. And a bunch of other issues I’ve had. So between that and the car, I was a little worried there might’ve been damage on the Boosted that I couldn’t see. After swapping the deck, I’m pretty sure it’s fine. So I’ll keep it as a spare. Yeah, thankfully I’ve had no RLOD issues with it. And 🤞🏻I won’t. But I’m thinking I might try get a battery with an amnesia chip. Just to be safe.