How to Mount the Vector Optics Frenzy 1x20x28 Red Dot Sight on a Glock Pistol ? 

It will hold up for .45 ACP, but I am not sure if it will hold up for 10mm.

All Glock 17, 34, 19 etc.. NOT SLIMLINE COMPATIBLE For Frenzy-S 1x17x24 use adapter Vector Optics Footprint MAG / RMSc SKU SCRDM-09 red-dot-sight.eu/products/adaptateur-compatible-glock-empreinte-mag-rmrc-pour-frenzy-s For Frenzy-X 1x20x28 use adapter Vector Optics Footprint TEK / Docter SKU SCRDM-01 red-dot-sight.eu/products/vector-optics-montage-type-rmr-pour-glock For Frenzy-X 1x22x28 use adapter Vector Optics Footprint MOJ / RMR SKU SCRDM-08 red-dot-sight.eu/products/adaptateur-compatible-glock-empreinte-moj-rmr-pour-frenzy-xl

It is important to tighten all the screws to the correct torque of 1.5 Nm (11 lbf·in) and to apply blue Loctite (Loctite 243) on all the screws.

Thanks@@reddotsight1013 for the reply. I have the same mount with a Vector Optic Frenzy SCRD-1911 1x17x24 that I have been wanting to install for sometime now but hesitant to do it coz it might loosen up after extensive use. I am using a Roni Kit for my Glock in the meantime. I might go ahead and install it after seeing your video.

@@reddotsight1013this optics mount is junk. My buddy still torqued his to specs on a 10mm Glock and it’s wobbly after 800 rounds of use. I suggest to get a MOS Glock and do it right. Don’t half ass it.

New from Vector Optics is an adapter for Glock 17 MOS, which is very well made. It is only compatible with Frenzy-S red dot sights (Footprint MAG / RMSc). red-dot-sight.eu/products/adaptateur-compatible-glock-mos-empreinte-mag-rmsc-pour-frenzy-s

The sticker is no longer necessary on the new adapters which are identifiable by the inscription "Fit Glock."

The adapter used is exclusively compatible with non-MOS Glock models that have a slide width of 25.5 mm (1.0 inch). Your Glock 20 Gen4 has a slide width of 28.5 mm (1.12 inches). Therefore, this adapter is not suitable for your model of Glock. Regards, Raphael from RedDotSight.

The D1 adapter is not compatible with models 20, 21, 20sf, 21sf, 29, 29sf, 30sf, G30. Vector Optics does not make other models.

I forgot to give the information 1.5 Nm (11 lbf inch)

@@reddotsight1013 Perfect.. thank you so much

Asegúrate de que el visor de punto rojo esté bien fijado al arma. Repositiona los tornillos en el punto medio de su recorrido para empezar los ajustes desde cero. Dispara 3 cartuchos, luego ajusta 1 graduación. Repite este proceso: dispara 3 cartuchos, ajusta, y así sucesivamente hasta obtener el resultado deseado. Si no logras calibrar el visor correctamente, te recomendaría llevarlo a un armero, quien podrá ajustarlo en aproximadamente 10 minutos. Buena suerte.

I am applying thread-locking fluid on the screws (Loctite 243).

@@reddotsight1013 thanks sir..

Ja, es ist für eine echte Waffe.

De hecho, no es necesario quitar la corredera 👍

@@reddotsight1013 ok realizado el pedido por Amazon , gracias

@@KatanaKatana1100 Gracias por su confianza 👌

Yes, it is essential

@@reddotsight1013 but then is it still possible to remove the sight from the gun after the screws are glued? Also, how to change the battery in this case? (sorry i have not much idea about this red dot sight)

@@victorlcl With blue glue (Loctite 243/242) you can still unscrew the screws, but if you use red glue (Loctite 270/271) it will not be possible to unscrew the screws. For your information, the CR2032 battery has an operating life of 2 to 3 years.

@@reddotsight1013 i see. That's a very useful info! I'm gonna buy this red dot sight

yes

@@reddotsight1013 Would it work for a BB GEN 4 too?

@@steveboone7390 It doesn't work with the blowback softair but it depends on the brand of your replica. You have to check if your BB is compatible with Glock sights

@@2sirb2383 Thanks

@@2sirb2383 it's not the softair but the co2 version that is by Umarex that shoots 4.5mm bbs and not 6mm bbs, so is a faithful replica of the realsteel version.

does not work with Slimline

Torque Screwdriver Wrench

It is normal for the adapter to lift; it does not make contact with the front of the pistol slide. When you screw in the two small screws, the adapter must be parallel to the pistol slide.

No, the kit is not compatible with the Slimline versions

@@reddotsight1013 do you know which with slimeline versions compatible?

@@pimelpirat1553 here is the link for the Slimline versions eu.glock.com/en/technology/slimline !!!!!!You should not use this kit for the Slimline!!!!

@@reddotsight1013 okay okay thanks

No, it's not compatible. This adapter is designed for the TEK/Docter footprint.

Yes, it's compatible

The CR2032 battery has a life of 3 to 5 years. This is really not a problem.

@@reddotsight1013 thank you!

Parallax: 1.0 MOA at 100 yds. But is this important on a pistol for short range shooting !?

@@reddotsight1013 It will be used in a Glock G19 MOS. I'm watching your video here from Brazil.

@@Moaximenes Don't miss the next video will be on mounting the Vector Optics 1x22x26 red dot on a Glock MOS.

Vector Optics Frenzy 1x20x28 SCRD-35 / SCRD-40 + Adapter Glock Vector Optics

Bei neuen Modellen mit dem Adapter mit der Aufschrift "Fits GLOCK" brauchen Sie das Klebeband nicht mehr zu verwenden.

Puede consultar nuestro sitio web.red-dot-sight.eu/

I just saw your RU-vid channel and you are not a great filmmaker, just like me. Instead of making useless comments that waste your time, you should use that energy to improve your videos.

yes, it works

@@reddotsight1013 wow thanks for your quick reply