How To Move The RF OUTPUT Channel On A Sky Box 

Nice, sorted out my interference straight away, I spent £10 on a new magic eye, new connectors which didn’t solve the problem, you helped my in 4 minutes…😊

Ahh perfect. Cheers pal. My Bedroom TV started all fuzzy. I put purchased a new aerial lead but that didn’t fix my issues. I was just about to purchase a new IO link box as I’d switched out all wiring and still no fix. Turns out my RF channel was in 21so I flipped to 38 and this instantly removed any fuzziness I had. Much appreciated.

Hi Tom - we have suffered with intermittent interference on analogue TVs in the house through RF2 for years. Finally tried this and moved the output from 68 to 38 as you suggested. Much better picture quality and no interference. 👍

I am following you video, which is very helpful. Would you suggest testing each manual analogue channel number from 22 - 50 to see which one stops my intermittent loss of picture? Do you know how to find out what rf is being used by other things in my area?

Hi. I have done all this after swapping sky hd boxes after a software issue with mine. For some reason the eye now won't change channel but it does with the old box. Any ideas would be appreciated. Thanks Tommy

Do you have a sky + hd box with a Ariel in because what is it like and do you still get the same channels on the sky + hd box

Thank you!

We are relocating our tv in lounge, our plan is to run the cable under the skirting boards, the problem is the tv is connected to tv in bedroom by I/ o splitter box and we don’t have any more space under skirting board for this cable, is there any other way this can be done?

Hi Tom I understand that new Smart TVs do not now have an analogue facility ? How can you send the rf sky signal to a new tv ?

Thank you

Can you make it over to Cork in Ireland b4 2pm tmrw? There's a pint & a challenge in it for ya 😂😂

hi need you help pleasse . i need to spitter my lnb to run freesat hd on my tv and a sky hd box. i brought a splitter . i lose of of the sky channels. the freesat hd is fine . any surguesstion please

If I buy Triax Link RF Output for Sky+ HD box, will I be able to use its RF output to connect to a RF in on my Panasonic Freeview HD Recorder and find freeview channels this way, i.e. to use sky+ hd as an aerial

Hi Tom. Excellent video tutorial. I have 3 separate sky boxes with 6 TVs. If I change the RF out on each box to 44-46-48 respectively, could I loop the 1st box RF out to the 2nd box RF in then 2nd box RF out to 3rd box RF in. From the 3rd RF out to an amplifier/splitter and then to each TV. Program each TV CH 1 to CH44, TV CH2 to CH46 and TV CH3 to CH48. Would this allow me to swap TV channel to view each box?? Afraid to try just in case I mess it up. Cheers.

Spot on Thanks

Hi, my hd box show dish input1 and dish input2. Is this the equvilent of rf1 and rft2 on these new boxes or something different please.

Hi Tom Thanks for your help

So basiccly i could plug my old CRT That has no scart using it like an RF Out Modulator. be good that as standalone Modulators are like the same or more money. but i guss if i pay for OD Sky via internet it could be used for internet tv sky instead of that big dish on a B/W tv that uses RF in

How do I put the aerial to my tv plz tom plz

Handy going to look into this 🙄

Sorted it, thanks

I pressed 38 thinking it would b grand but now it gone fully fuzzy

could u please tell me why my 2nd tv has no hd signal only horrible analog came down in morning and hd was gone just the blurry standard .I didnt do anything to the box its tv 2 on magic eye

Might be worth mentioning that on older boxes like mine it's SERVICES - 4 - 0 - 1 - SELECT