Тёмный

How to Open and Make a Key for a Really Cool Vintage Padlock 

Pask Makes
Подписаться 1,2 млн
Просмотров 93 тыс.
50% 1

My Brass Hammer Waitlist: paskmakes.com/the-brass-hammer/
I recently got hold of a vintage brass pancake lock similar to the one I made last year. Unfortunately it didn't have a key although it did give me an opportunity and a challenge to open the lock and make a new key.
It was my mate Luke who found the lock, you may remember him from past videos. Luke makes awesome stuff and you can check out his work here / make_smith
As always I'm happy to answer any questions.
If you would like to support this channel you can do so here
/ paskmakes
You can also help me out by purchasing one of my shirts, you can find them here paskmakes.threadless.com
Check out my new website
paskmakes.com/
Check out my Instagram to see more of my work / paskmakes
Also you can check out my photography at my website (nothing to do with making but you may be interested in what I do) www.neilpaskinphotography.com
My email can be found in the about section of this channel.
For real mail,
Pask Makes
P.O BOX 768
Yandina
Queensland
4561
Australia

Хобби

Опубликовано:

 

16 мар 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 161   
@PaskMakes
@PaskMakes Год назад
My Brass Hammer Waitlist: paskmakes.com/the-brass-hammer/ This was a cool little project that I really enjoyed and something a bit different. You can check out my mate Luke's awesome work here instagram.com/make_smith/
@TasareAlda
@TasareAlda Год назад
This was definitely interesting enough to share thanks!
@ShinoPuppy
@ShinoPuppy Год назад
Hey, it's LockPickingLawyer, Aussie edition! In all seriousness, I really enjoy these non-standard projects!
@PaskMakes
@PaskMakes Год назад
I'm not sure about that but glad you enjoyed it! The video was an enjoyable change for me too - something a bit different!. :)
@theoriginalrecycler
@theoriginalrecycler Год назад
Lock picking larakin
@RobDeHaven
@RobDeHaven Год назад
Even tho @bosnianbill is no longer active on YT, I think Pask is more in line with Bill. Great video tho! Really enjoyed it.
@JustJimWillDo
@JustJimWillDo Год назад
"This is the lockpicking Queenslander and what I have for you today…" ""I'll open that again just to prove it wasn't a fluke." Lovely work, Neil. Here's another word for your vocabulary, what you were doing with the nails to start with is called 'impressioning' the lock.
@georgecunningham9175
@georgecunningham9175 Год назад
".......and I thought it was interesting enough to share............" Watching you watching paint dry would be interesting enough to share on this channel. You never fail to amaze and amuse, and i look forward to each video, though in practice I have, nor do I believe that I will ever have, occasion to create or perform anything you accomplish on this channel - I suppose I just like absorbing knowledge that is not directly relevant to my life - or I just enjoy your knowledge and talents and the resulting videos!
@deliaguzman1138
@deliaguzman1138 Год назад
Neil, everything you do is interesting enough to share! Thanks for this cool into these locks!
@PaskMakes
@PaskMakes Год назад
Thanks very much Delia! :)
@a88senna
@a88senna Год назад
I was never really as interested in metal working as I was with woodworking, but your videos have got me super interested, and I love the added variety you now bring to the channel.
@PaskMakes
@PaskMakes Год назад
That's awesome glad it's got you interested! I reckon making is making whatever you use and it's more fun to explore different techniques. :)
@a88senna
@a88senna Год назад
@@PaskMakes exactly, what put me off was not having the tools or techniques, but really I had enough tools to still do a bit, and the technique of trial and error is as good as any when it's only a hobby for me.
@PapaDan
@PapaDan Год назад
Very cool Neil. Another educational video for me. I worked for the railroad for 25 years and I’ve seen a lot of padlocks. First time I’ve ever seen a push luck let alone a push lock that did not have a key with it.
@PaskMakes
@PaskMakes Год назад
Thanks Dan! From what I've read these locks were used on railroads and this one is from New Zealand. :)
@bobbyjackson4452
@bobbyjackson4452 Год назад
Great job once again. Sometimes these small maintenance/housekeeping tasks are more fun to watch than the big projects. Thank you. :)
@PaskMakes
@PaskMakes Год назад
Glad you enjoyed it Bobby! :)
@josh_watson
@josh_watson Год назад
You said this video is different than the normal, but I don’t see how. You wanted to make something cool, then you did and we all loved it. Pretty normal to me. Cheers!
@Zogg1281
@Zogg1281 Год назад
That padlock is really nice, and I love how you showed how to make the key to the right bidding for the lock. 😊👍👍👍👍👍
@ralphnorman4636
@ralphnorman4636 Год назад
Thank you for showing a new type of lock never seen before, "Except for the one you made" New to me at least.
@MrSmileyn
@MrSmileyn Год назад
LockPickingLawyer may approve this !
@ubertalldude
@ubertalldude Год назад
It's amazing how close your homemade lock resembles this one. Great work on making the key for this one, what a fun and interesting little project! You have a great channel and all your videos are informative, entertaining, and relaxing. Cheers!
@PaskMakes
@PaskMakes Год назад
Thanks very much Alex! I'm super pleased with my lock, probably one of the pieces I'm most proud of. :)
@Vickie-Bligh
@Vickie-Bligh Год назад
That was fun, interesting, and informative. It may not be your 'usual' fare but it's still a fabulous video where we see you puzzle out a solution and fabricate it. Thanks Neil. Loved this.
@PaskMakes
@PaskMakes Год назад
It was a fun one to make too Vickie - glad you enjoyed it! :)
@tomnorman5461
@tomnorman5461 Год назад
Old locks are awesome!
@DanKoning777
@DanKoning777 Год назад
I've been using Boeshield T9 for 10 yrs after a friend gave me a can to compare to WD40; haven't gone back since. I use in all my exterior door locks, padlocks, and as a lubricant-it's amazing. Great video Neil.
@PaskMakes
@PaskMakes Год назад
I agree Dan - it really is awesome stuff. :)
@CrabOfDoom
@CrabOfDoom Год назад
Few things as lovely as good, old locks and keys.
@PrimalEdge
@PrimalEdge Год назад
not sure why, but I am fascinated with old locks like that, especially skeleton keys. groovy video!
@PaskMakes
@PaskMakes Год назад
I'm with you - they're just cool! :)
@GM-qq1wi
@GM-qq1wi Год назад
I'm a fan of these new videos and various projects. It's interesting to see how other people go about fixing/restoring and improving things around their home and workshop. It's given me the motivation to work on some projects for myself instead of focussing all my creative energy on others ideas. Putting aside some mental energy to visualise my own goals.
@PaskMakes
@PaskMakes Год назад
Glad the videos are helpful! :)
@thomas-gk9jp
@thomas-gk9jp Год назад
The great return of the hacksaw !! 😁 Always a pleasure to watch your videos
@PaskMakes
@PaskMakes Год назад
Thanks Thomas - I reckon I still use a hacksaw pretty much most days. :)
@uncletiggermclaren7592
@uncletiggermclaren7592 Год назад
How cool. I had one of these locks when I was a kid, found it in our scrapyard. Never thought of trying to make a key. My brothers and I used to carry a LOT of cool stuff away, eventually our dad started charging us per Kg. :)
@GlenCychosz
@GlenCychosz Год назад
Congrats on over a million subs. You deserve it. Have you ever watched lock picking lawyer?
@andyc972
@andyc972 Год назад
That couldn't have gone better - nice lock !
@williamellis8993
@williamellis8993 Год назад
Nice, Neil. I'm glad you decided to share this with us. Bill
@adelheidsnel5171
@adelheidsnel5171 Год назад
That is so clever using the nails as a template!!!!
@captbuscemi
@captbuscemi Год назад
Wonderful! I still think that brass lock you did is your best build to date, I just love rewatching those vids, this makes a great companion to the original videos.
@PaskMakes
@PaskMakes Год назад
Thanks very much and glad you still enjoy the original build! It really was one of my favourite projects too and can't believe it actually worked. :)
@elisabethreeves1786
@elisabethreeves1786 Год назад
Definitely worth publishing this video!
@juneritchie2498
@juneritchie2498 Год назад
Great attention to detail.
@PaskMakes
@PaskMakes Год назад
Thanks very much June! :)
@rhoula
@rhoula Год назад
3:28, Hey honey do you want some metal shavings with your coffee? Pask: No babe I have some at the shop. :) Thank you so much for another excellent video. Always a pleasure to watch your videos, over and over again :)
@melindajohnson3394
@melindajohnson3394 Год назад
A contour gauge...to pick a pick. Amazing!
@dragade101
@dragade101 Год назад
Impressioning is a good attack for locks with exposed bitting like this (see tubular locks and they are picked and decoded with just one tool as well)
@oneupmanship
@oneupmanship Год назад
I have this exact lock, it was in my grandfathers possession. I've had it for many years and it works. Cool to see this.
@PaskMakes
@PaskMakes Год назад
Awesome! Glad you enjoyed it! :)
@corinkayaker
@corinkayaker Год назад
Great work mate! I love the one you made and it is fantastic to see how close it looks to an original!
@PaskMakes
@PaskMakes Год назад
Thanks very much mate! :)
@ianvicedomini2648
@ianvicedomini2648 Год назад
Nice little project Neil. 👍🏽👌👏
@BenNawrath
@BenNawrath Год назад
Very cool! I like little oddball projects here and there. Especially one that solves a problem like this!
@PaskMakes
@PaskMakes Год назад
Thanks Ben - it was a bit different but I enjoyed making it too. :)
@alannaribich3622
@alannaribich3622 Год назад
I received one of these without a key as a gift last year and making a key for it was a fun little project.
@rayjohn4444
@rayjohn4444 Год назад
Thanks very much - greatly enjoy and appreciate all your postings - very inspiring and educational. - Ray Southern CA
@RookieLock
@RookieLock Год назад
Great work! At first I was worried you were going to disassemble the lock to measure for a key. I should have know better ;P Very nice !
@valvenator
@valvenator Год назад
I had one of these locks sitting around and planned on making a key the way you made yours. I found an uncut key blank online, so I figured I'd save some work and just buy the blank. When It arrived I popped it into the lock to make sure it fit. Lock popped open, no cutting necessary. 🤯 Needless to say I wouldn't trust it to keep any valuables safe.
@keithgoldston2859
@keithgoldston2859 Год назад
I can watch you do just about anything in the shop lol
@alanmuddypaws3865
@alanmuddypaws3865 Год назад
Skilled maker and now lockpicker too! Is there no end to your talents? Always a pleasure to watch you work.
@PaskMakes
@PaskMakes Год назад
Glad you enjoyed it Alan although I'm definitely not a lock picker. :)
@chaserwilliams1
@chaserwilliams1 Год назад
Man! That was super cool!!! I love locks, especially older ones like that. I have a goal to make a nice brass lock one day.
@PaskMakes
@PaskMakes Год назад
I agree Chaser - you should have a go at making one, it was an awesome challenge. :)
@jimbenge9649
@jimbenge9649 Год назад
A little gem of a video. 👍
@rickmoore
@rickmoore Год назад
Nice quick little project, thanks!
@MsDrawn
@MsDrawn Год назад
Thank you for this, I have 5 of these that need keys and I am going to did them out storage and get to work.
@dandy2157
@dandy2157 Год назад
Those look exactly like my great grandfathers US army footlocker lock that I still have, only mine has a warded key not a push key
@brianscott1898
@brianscott1898 Год назад
This is very much a video that fits you., always great to watch such a great creator
@JoriDiculous
@JoriDiculous Год назад
Neat trick that might come in handy should i ever get a lock like this :)
@MHPloni-kl5ec
@MHPloni-kl5ec Год назад
Yes, definitely interesting and of value. Thanks for sharing. We're with you, mate!
@samanthadean1083
@samanthadean1083 Год назад
Awesome job!!! I didn’t know this trick! ❤️❤️❤️👍🏻👍🏻👍🏻
@strangeblacksmith
@strangeblacksmith Год назад
That's a cool lock. I want to make some locks in the future, this looks like it might be a good start.
@PaskMakes
@PaskMakes Год назад
Thanks very much! I have to say, I think there would be easier locks but if I managed I'm sure you can too. I definitely want to make more locks. :)
@jonathan2585
@jonathan2585 Год назад
You never cease to amaze me with your skills
@PaskMakes
@PaskMakes Год назад
Thanks very much Jonathan! :)
@Justinsviewfinder
@Justinsviewfinder Год назад
As always, enjoy your videos. Very cool seeing the process in making a key for this lock. Kudos!
@PaskMakes
@PaskMakes Год назад
Thanks very much Justin - glad you enjoyed it! :)
@charlvanniekerk8009
@charlvanniekerk8009 Год назад
its really awesome to see what an original one looks like and how one can go about opening it. Thank you for the short and sweet video i can say it was really enjoyable
@PaskMakes
@PaskMakes Год назад
Thanks very much Charlie - glad you enjoyed it! :)
@firesurfer
@firesurfer Год назад
When you need to copy/transfer something, use a printer with a scanner bed. Make a copy 1:1. I used it for computer motherboards to transfer mounting holes for standoffs. It saves tedious measurements and is much more accurate. Spray some contact cement on it to mount it.
@garagemonkeysan
@garagemonkeysan Год назад
Awesome video. Super interesting. Need to get me one of those ratcheting tap wrench. Mahalo for sharing! : )
@threeriversforge1997
@threeriversforge1997 Год назад
Great, as always. I love those short little project for the quick sense of accomplishment they give you. Don't know if I could make a lock, but I've made a few skeleton keys for locks I've found. I'll be sure to remember that pin nail trick for future reference!
@PaskMakes
@PaskMakes Год назад
Thanks Vaughn - it was a project I just wanted to get at and I thought it was worth filming. :)
@colinbrewhaha
@colinbrewhaha Год назад
good of you to use a coaster for the coffee!
@panedrop
@panedrop Год назад
As always, I really enjoyed this one.
@tinkeringinthailand8147
@tinkeringinthailand8147 Год назад
Top job Neil.
@MCsCreations
@MCsCreations Год назад
Fantastic work, Neil! Really interesting process indeed! 😃 Thanks a bunch for sharing! There's always tips we can get from those videos! Stay safe there with your family! 🖖😊
@PaskMakes
@PaskMakes Год назад
Thanks very much! :)
@JimG31547
@JimG31547 Год назад
Great project thanks for sharing.
@jackwriter1908
@jackwriter1908 Год назад
Now I want one of those Padlocks...
@N0B0DY_SP3C14L
@N0B0DY_SP3C14L Год назад
Nice one! I did almost the exact same thing except I used a couple of popsicle sticks and elastics to hold the brads.
@PaskMakes
@PaskMakes Год назад
I was surprised how easy it was! :)
@Saavik256
@Saavik256 Год назад
I dig through a lot of antique flea markets on a fairly regular basis, yet in the past 20 years I've never seen this type of padlock here in my neck of the woods (Central Europe).
@mattkent655
@mattkent655 Год назад
Awesome as always Neil
@brentfowler2317
@brentfowler2317 Год назад
I'm glad you shared. And very well done my friend!
@kellcomnet
@kellcomnet Год назад
It may be different than your typical video, but I enjoyed it.
@jessiemae6873
@jessiemae6873 Год назад
What a fun video! Thank you.
@TheUncleRuckus
@TheUncleRuckus Год назад
It's not the _Scrapwood Challenge_ I was hoping for but I will take lol. 👍👍
@rayjohn4444
@rayjohn4444 Год назад
Best site period
@stephendoherty1275
@stephendoherty1275 Год назад
Awesome! Thank you for sharing.
@JDKempton
@JDKempton Год назад
Really glad you shared this, always great to watch you work👍
@PaskMakes
@PaskMakes Год назад
Thanks very much! :)
@sapelesteve
@sapelesteve Год назад
Nice work Neil! 👍👍🔐🔐
@loganwolf1359
@loganwolf1359 Год назад
Really liked this video.. wish I could give it more than one thumbs up!
@nobuckle40
@nobuckle40 Год назад
That was pretty cool!
@54mgtf22
@54mgtf22 Год назад
Love your work 👍
@alanmooney3466
@alanmooney3466 Год назад
Fascinating!
@jamesa7506
@jamesa7506 Год назад
👍 another cool lock 🔐
@Vikingwerk
@Vikingwerk Год назад
Clever work!
@KarlBunker
@KarlBunker Год назад
Neat project! It's funny that "6 Levers" is embossed right onto the lock, since that's useful information when you're trying to pick the lock. I guess it's not supposed to be a high-security lock, but the manufacturer going out of their way to help out lock-pickers seems a bit odd. 😀
@loucinci3922
@loucinci3922 Год назад
Enjoyed Watching. Thanks for sharing
@Rubbernecker
@Rubbernecker Год назад
Great video!!
@simonashley7
@simonashley7 Год назад
Yet another brilliant, informative, video.
@MaddMaxxWoodWorks
@MaddMaxxWoodWorks Год назад
pretty cool stuff.
@robshamel3210
@robshamel3210 Год назад
That’s really cool.
@birdseyeview1543
@birdseyeview1543 Год назад
Always wondered what those odd keys were for...
@mackellmo1083
@mackellmo1083 Год назад
so good!
@BillsCountrysideAdventures
@BillsCountrysideAdventures Год назад
Great video
@timmymartin317
@timmymartin317 Год назад
Very nice!
@swagmanexplores7472
@swagmanexplores7472 Год назад
Ingenious !
@julietphillips1991
@julietphillips1991 Год назад
Smart work, if there is such a thing!
@brentnearhood8874
@brentnearhood8874 Год назад
Thanks! Pask 🔒🔑
@christopherharrison6724
@christopherharrison6724 Год назад
Yet another interesting video thanks
@azashukri5322
@azashukri5322 Год назад
This was fun!
@clemoniii
@clemoniii Год назад
Quite interesting, thanks!
@mariushegli
@mariushegli Год назад
I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.
@seth1371
@seth1371 Год назад
4:25 just signed up for the waitlist.
@johnsonhunglo1993
@johnsonhunglo1993 Год назад
Neil, do you find 'weekday' posting more relaxing? Stay well!!!
@G.S.W.SewmesomeMusic
@G.S.W.SewmesomeMusic Год назад
He’s a bad man with a hacksaw lmao 😂👍☮️
Далее
Impressioning a Key for a Keyless Collectable Padlock
12:26
I Built 4 SECRET Rooms In ONE COLOR!
29:04
Просмотров 11 млн
How to make Kumiko from Nails
11:09
Просмотров 289 тыс.
I made a padlock with a secret opening
9:07
Просмотров 3,2 млн
Forging a Key for an Old Lock - Slavic Smith
16:52
Просмотров 47 тыс.
three lever antique cabinet lock key make
18:58
Просмотров 3,4 тыс.
DiResta Vintage Padlock
12:14
Просмотров 4,1 млн
Forged Wood Carving Knife from a Car Spring
15:46
Просмотров 351 тыс.
Can I Make A Padlock? Part 1
10:01
Просмотров 244 тыс.
Reality check #latman #wings #flintlockwood
0:13
Просмотров 26 млн
CJ попал в GTA V 😂
0:28
Просмотров 4,5 млн