I'm learning CW on a 1903 British Postal [straight] key. Ever since I've used his technique my error rate dropped to zero! He shows you starting at 2:15. It really works. Now I'm picking it up at a much faster pace! I'm learning from this man just watching him. He is a Master! When I get good at CW I'll buy a GHD. Right now I couldn't do it justice. Great video.
@@Jabeanboy it reminded me of my days as a radio operator working in the navy and later on I was transferred to the wireless communication school as an instructor teaching tactical communication
Fascinatting technique. I wish I had learned that way on my old j38. It wouldn't help me much with my homebrew doorstop-spring key now. Great to see someone who really knows how to pound brass.
Opět jsem tu abych viděl a slyšel tu nádheru! Jsem doslova unešen tímto senzačním zařízením na nácvik telegrafie! Mít tu možnost a prachy, bez váhání bych to bral!! Japonci jsou na elektroniku fakt geniální, to se jim nedá upřít. Skvělá technika, hodná 21.století!!! CONGRATS, VY 73!!
If you're using a straight key with a lovely raised knob like that one, it's much easier to use if you bring it to the front of the bench and position it directly in front of your right (or left) arm/hand.
good instruction, i dont have my forearm resting on the table either. i use a j45 leg key and have used cw for 40 years and still dont have carpal tunnel, u don't need to send more than 18 wpm but it can be easily done with a straight key and the majority of people i hear using bugs send lousy cw.
_not_ having the ellbow rested, has its limits during long QTCs. (i speak from navy experience) However, his wrist technique is perfect and can be applied with resting ellbow as well as with floating ellbow... he is a good teacher.
This is a great instructional video for CW ops , and the man here is a master . You can tell he's been pounding brass for a lot of years . GHD sure do make beautiful keys !
In the video how the key is keyed and is totally wrong, one places their arm on the table with the wrist doing to the work, not the arm. Doing as in the video one will develop pain in the arm after long sending periods.
@@n9eerptr most people believe the opposite. Forearm and fingertips, no rapid flexing of the wrist as it's not built for it and you'll develop an injury.
@@PaulTaylor1 No most do not believe the opposite. Professionals do it with arm on the table. And the master for learning and sending the code, William G Pierpont, N0HFF (SK) who wrote The Art & Skill of Radio-Telegraphy and taught the military how to learn and send code for years teaches a totally different method. Also in the video the code being sent is lousy, timing is way off. It is also slow, try sending at 20wpm for 10 minutes with this method. And one adjust the key for ones good feel, not with paper and a weight. Different speeds require different adjustments.
@@n9eerptr And at Portishead Radio, in its day the largest marine radio station in the world, all its operators used the floating arm method, as do most Europeans and Asians.
I disagree - that is far too large a gap and too much tension. You would not be able to send for very long without getting "glass arm" now termed RSI. His grip on the key is absolutely perfect and I always recommend one with a skirt. = DE GW4XXF +
You don't find many ops in the USA sending with their wrist off the table like that. Most Americans prefer to use a bent lever to keep their arm down on the table. Seems like too much work to lift your arm the way he does. GHD also sells the straight keys with the bent lever for the USA. They're a FB key for sure...
ellbow should rest. if you do longer QTCs with floating ellbow you will get a sloppy rhytm (QSD) as you tire much faster. Aside from that... domo arrigatou
@@RicktheRecorder This myth as you say is supported by William G Pierpont, the writer of "The Art & Skill of Radio-Telegraphy". He was well known for teaching the sending and receiving of CW and was long time advisor to the military. Alai dor about every type of key used for CW, bug or electronic, a side to side stroke with arm and hand on the table is used and for good reason. Take it from someone who had to send CW for hours at a time. But to each their own, main thing is to get the timing for sending correct.
No not the way. With the arm and fist up high one will get a tired fist and arm when sending long messages. Proper way is first the knob it too high and second need to position so arm is lying on the table, like one writing with a pin, how many write with their arm or hand up off the surface, same with key. Nice looking key, but not the best design. Look at the way the Navy use to do it when they used CW. They had like J38s with knob down and low so op could rest low on the table. Yes the op has good fist, but how long before his arm gets tired.
All european keys have hight knob. The technique of this OM is perfect but in the italian navy they were used to put the elbow on the table. But the technique of moving the wrist is better prevent pain in the wrist because you actually use the forearm to transmit. There's no force applied by the wrist that naturally follow the forearm. All of European professional cw operator worked for a lot of hour on ship using this technique. Search for I4CQO.
@@outdoorbeginners2068 Yes many that have taught sending with straight key do say rest arm on the table. The way it is done in the video one will get pain in the arm after long periods of time. And what about using a bug or a electronic keyer, does one hold their arm off the table, heck no. As was written in "The Art& Skill of Radio Telegraphy" by William Pierpont who gave instruction to the US Navy on learning to receive and send the code saying "The key should be located far enough back from the edge of the operating table, about 18 inches, that the elbow is just off the edge of the table. The operator's arm rests lightly on the table with the wrist off the table" The wrist, not the fingers or the whole arm, does the work as the key goes down and up. Keep the wrist off the table." I when learning and using the code as a Novice and sending for longer periods rest my arm on the table for having off the table did develop pain and had much less control of the key.
@@n9eerptr One just loves the self-confidence of Americans. Just because one William Pierpont taught a particular method suitable for a specific low-profile design of key, doesn't mean its more right or better than other methods. "The way it is done in the video one will get pain in the arm after long periods of time." is obviously nonsense if three-quarters of the world's professional operators use that method. It plainly doesn't cause injury.
@@outdoorbeginners2068 I think you hit it, most European keys are made with high knob, where most US keys like Vibroplex and old keys like the famous J38 have the forward shaft coming down and knob very low. So how one sends probably depends on where the knob is. But I do see having low and arm on the table makes it more confrontable. Try just holding your arm out in front of you for 5 minutes like the sending in the video vs resting on a table. One would not normally write on paper with arm high, same with sending. Just makes sense to me. But I use a electronic keyer. Use to be good with straight key, used ole $2.95 key from ARRL as Novice and took my 20 wpm Extra in front of FCC with I think they gave me a J38, passed with no issues. But after getting off CW for 20 years when returned was so bad had to use electronic keyer. Still have couple J38s, but too lazy to relearn it, hi.