How to Operate Vaillant ecoFit Pure Combination Boiler, Adjust Hot Water & Heating & Lots More,

Подписаться 44 тыс.

Просмотров 89 тыс.

50% 1

I will go through the boiler step by step showing you how to adjust your hot water temperature and the most efficient temperature to set it at.
Your central heating temperature and the most efficient temperature to set it at.
How to Re-set the Vaillant ecoFit Pure Combination Boiler.
How to turn ON and OFF the "Comfort setting / hot water Preheat" on the Boiler!!!!
How to turn ON and OFF your boiler.
Adjusting all these will make you boiler last longer and use less gas saving you MONEY and of cause reducing climate change.
If you want to support me further then please leave a Donation in my “TOOL BOX FUND” that is really appreciated.
www.paypal.com/donate/?cmd=_s...
Please don’t forget to SUBSCIBE and click the BELL for notification of my new videos.
Share me with your friends.
Visit my Web site at www.markballard-ltd.com
Where all my videos are categorised to make them easy to find, along with links to parts and products I recommend.
Links To Other Help Videos.
How to adjust set and turn on and off Vaillant 24 hour boiler timer
• How To Operate and Adj...
How to clean Vaillant magnetic Filter. Vaillant Protection Kit.
• How to Clean Vaillant ...
How to clean Vaillant Filter/ Spirotech Filter. Vaillant Protection Kit.
• How to Clean Vaillant ...
How to top up Vaillant ecoFit Pure Combination Boiler. F22 Fault.
• How to Fix F22 on a Va...
How to Fix a Radiator NOT Getting Hot! Most common Reason.
• How to Fix Cold Radiat...
Is your boiler continuously losing pressure. What the problem could be.
• Boiler Keeps Losing Pr...
VIDEO: How to replace a leaking Radiator Valve. With out draining the system.
• Replace Radiator Valve...
How to replace a radiator valve EXTENDED version.
• Replace Radiator Valve...
How to replace a Radiator with out draining the system.
• How to Replace a Radia...
How to remove a radiator for decorating.
• How to Remove Radiator...
How to refit a radiator after decorating.
• Video
How repair leaking radiator blanking plug.
• How To Repair a Radiat...
How to flush out your radiator.
• How to flush Out a Rad...
How to add inhibitor into your, with out draining the system.
• Video
How to Paint/Spay your Radiator. with a sparkle finish.
• Radiator Spraying / Pa...
How to clean the MagnaClean Professional 1
• How to Clean the Adey ...
How to clean the MagnaClean Professional 2
• MagnaClean Professiona...
TOOLS, Einhell Classic TC VC1930S Wet & Dry Vacuum Review.
• Einhell Classic TC VC1...
The Gas Safe Register.
www.gassaferegister.co.uk
If you want to support me further then please leave a Donation in my
“TOOL BOX FUND”.
www.paypal.com/donate/?cmd=_s...
Chapters
0:00 Vaillant ecoFit Pure, Operation / Introduction.
1:52 How To Operate Vaillant ecoFit Pure Display and Buttons.
2:50 How to Turning Vaillant ecoFit Pure ON and OFF.
3:15 Vaillant ecoFit Pure Display Icons and Meanings.
4:24 How to adjust Vaillant ecoFit Pure hot water temperature
6:55 How to Turn ON and Off Comfort, Preheat on Vaillant ecoFit Pure Boiler.
8:40 How to Adjust Central Heating Temperature on a Vaillant ecoFit Pure Boiler.
10:27 How to Reset a Vaillant ecoFit Pure Boiler.
11:40 F22 How to repressurise Vaillant ecoFit Pure Boiler F22.
14:19 How to Set Vaillant 24 Hour Boiler Timer.
If you want to support me further then please leave a Donation in my
“TOOL BOX FUND”.
www.paypal.com/donate/?cmd=_s...
I've been a gas engineer for over 20
The aim of my channel is to help you with your central heating and plumbing systems. From the general operation and maintenance to the more advanced fault finding, installation and repairing of your systems.
Please don’t forget to SUBSCIBE and click the bell for notification of my new videos. share me with your friends.
And if you have a similar story or a question you can leave it in the comments.

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 97

@ravnyppon234 6 месяцев назад

This saved my post-Christmas crisis and that also from videos/instructions to other (older versions of) Vaillant. Thank you indeed.

@suedeharo9438 Год назад

Thanks so much .. I bled my radiators then got in the shower !!! No hot water ... you have saved me . The F22 fault has been solved. Amazing as I am a 58 year old female with no tech knowledge at all ! Getting back in the shower now!

@K0ALA. Год назад

Have a lovely shower Sue

@steelcitydomains2356 8 месяцев назад

Exactly the same for me just bled mine got the same

@user-fg9bx6ut8y 3 месяца назад

Thank you so much Mark for perfectly demonstrating and clearly explaining. As a single 60 plus female, your videos are exactly what I needed after having a new Vaillant ecofit 830 boiler installed a year ago. I have already confidently adjusted my hot water and radiator temperatures and can repressurize the boiler when needed. Again with confidence! I've now subscribed to your channel and will happily make a financial contribution 😊.

@pisancheto1 Год назад

Thank you so much.. I’ve been freezing all day and trying to find out what’s Wrong with my heating system and it was just a simple push of a button! You’ve saved my life 😅

@davestarr.8772 2 года назад

Really helpful video. I had a new Vailant combi installed back in the summer, but had no idea how to drive the menus, and I'm an engineer! Who knew that the gate icon was supposed to represent a radiator, or that the rad temperature could be adjusted. It all makes great sense now - thank you so much for this, and for your other video explaining leaks and the need to re-pressurise the system ocasionally.

@roberthughes3544 2 года назад

Thanks Mark, Having had my 30 year old Potterton boiler replaced last summer with a Valliant ecofit boiler I have found your videos very informative and easy to follow. Enjoy your coffee on me!

@DambudzoRuzhowa Год назад

Thank you for this video. It's so well explained and covers exactly the points that I needed. I've just bled a radiator, which brought the pressure down to 1.1 but I couldn't work out from the manual what to do. You've helped me to get the pressure back up to 1.6 and I've also changed both radiator temp and water temp by a couple of degrees. Thanks for the help!

@manojshukla1665 Год назад

Beautifully and simply explained and illustrated! Thank you so much Mark - you are a life-saver! I was struggling to find out how to top up the pressure. Bought you some coffee to have in-between making such helpful videos! Stay blessed. 🙂🙏

@stevied8855 2 года назад

Thanks Mark, Great video. Clear and simple. No fluff added here that we don't need. Thanks, Stevie in Scotland.

@CrazieChick43 Год назад

Thank You, thank you, thank you 💖 I'm clueless when it comes to boilers. My previous one was simplified. I have a Vaillant Eco Plus now. It is so much easier to get around, thanks to you and your easy to follow instructions. My main concern was the bar (water pressure), and it was lower than I thought. After watching your video, I thought, "I can do that!" And so I did. Thank you so much.

@jacquelinemellor1207 Год назад

Love this, after 1 watch sorted pressure out!!! Thank you Mark 👍

@lynetteireland Год назад

Brilliant video. I was actually able to sort out the radiator temperature and water thanks to your video 🤗

@dawidptak6433 Год назад

Best boiler video I ever seen. 9pm. And you fixed it for me. Thanks

@sarahw3007 8 месяцев назад

Thanks so much Mark really clear and repressurised my boiler 😊

@samanthahardy9903 Год назад

Thank you so much for doing this video. I checked my hot water and it was set to 55. So I reduced it to 47 and don't need to add as much cold water.

@deejaydannyj5621 Год назад

Fantastic job, very clear instructions. Love your videos, extremely helpful. Keep up the great work.

@estle Год назад

Very useful and clear advice. Thank you! 👍🏼

@simplyonemortality8122 2 года назад

Great video, very informative - thank you! You have helped demystify some elements of my boiler for me in this video and hopefully it will also save me some money long term (by reducing my hot water temperature/the amount of cold water I use... and save my fingers from being scorched and then reaching for the cold tap). I also see you have a video on removing your radiators for decorating too, I will be heading here next! Your knowledge/this channel is super helpful. Thanks again :)

@RichardFenn-ox7oq 3 месяца назад

Thank you so much for these videos that simply explain the boiler. Very helpful.

@amycyndy1722 8 месяцев назад

Very detailed, I was able to fix the low pressure issue with the help of the video. Thank you very much

@oakinsola536 Год назад

This was so incredibly helpful! Thank you so much 🙌🏽🙌🏽 🙌🏽

@ranjitpatel496 Год назад

Thank you for video Iv fitted many Vaillants,mostly Worcester so very useful.

@manvhestercity1894 2 года назад

thank you very much exactly what i needed 😊

@lyndsyscott-ward3047 Год назад

Thank you so much. Absolute life saver.

@user-gl7hn5yo8d Год назад

This video was very helpful,thank you.

@dputhapa5280 Год назад

Thank you so much for video I fix myself at home with the help of this video ....keep it up really appreciate

@indiarose2963 Год назад

Thank you, you're a life saver!

@baseera6532 2 года назад

very helpful video, thank you so much!

@tonyjennings8199 Год назад

Super - nicely explained with additional information (ideal temperatures & topping up, which is what I was looking for).😃 From some previous googling, I thought I the highest temperature for efficiency was 55 because it meant it was condensing most efficiently. I am going to look around and try to understand this aspect better (perhaps a video from you in the future about this would be a good entry in you collection) 🤨

@meagera333 2 года назад

Fantastic video and very useful 👍🏻

@T-bit Год назад

Cheers, just had this boiler fitted and it seems the water comes out very hot no matter what I set it! I'll turn off comfort mode and retry. Thanks again 👍🏼

@rangjungyeshe 2 года назад

The manual that comes with the boiler is really poor, so your video was really helpful. The screen was completely blank until we turned up the thermostat, then we had access to the home screen and your instructions worked just great.

@cathybruce10 Год назад

Agreed the instructions are terrible!!

@SnafflepussGladrags 2 года назад

This is so helpful and easy to understand, much better than the manual, thank you! I'm going away for ten days - should I turn the boiler off/change the settings/put it on standby?

@avneet1819 8 месяцев назад

Really good video thanks

@tahira7601 8 месяцев назад

Very good video and it is very useful video thank you very much 😊😊

@TheRoybeasley Год назад

Great video. Also worth noting that if you have Vaillant's SensoHOME controller/thermostat you won't be able to change the flow temperature to the rads using this procedure.

@crazygeorgelincoln 2 года назад

Hosing association ripped out our multipoint and stuck one of these in, we do not have central heating, The multipoint you could adjust the temperature at the tap ,much more convenient.

@pauliep2617 Год назад

Thank you, greet video

@eribekevictor3678 Год назад

Thank you so much

@MADONNASTHUNDERPUSS Год назад

Thanks, helped me repressurise

@MarkD-303 9 месяцев назад

Great thank you ,👍

@iggyace145 2 года назад

Great thanks

@paul_my_plumbs_uk 2 года назад

Happy New year mark 🍺🍺🍺🍺

@rickrickboom5423 9 месяцев назад

I find a twenty pence piece works wonders for my stiff valves.

@davidboyd9061 Год назад

Thank you Mark very helpful videos. Im currently trying to stabilise my Vaillant ecoFit Thinking air maybe in the system as the presser swings high low. I see there is a purge program would you advise this please?

@laszlopetrov4022 2 года назад

Perfect

@psarinuk Год назад

Hi Mark, great video as always. I have just moved into a house with Vaillant Ecofit Pure 835 boiler and have set the DHW to 50 and CH to 65. Howver every time I check the boiler when the central heating is ON, I see 76 on the display. So why is that the boiler is not following my set temperatures? I am also sure that my DHW is hotter than 50. Please help.

@dee106ful Год назад

If you have an electronic timer you have comfort or program mode. In comfort mode it allows the room stat to control when the heati g comes on. If you use programme mode you have to set each days time to come on. Well if you can predict days when you want the heating on thats fine. So if you want to save energy you needcomfort on.

@reeree80 Год назад

Hi thank you for your help. my valves are already both horizontal which way and how much do i turn it please.

@danmetalgod1 2 года назад

Hi there just recently moved into my new apartment I have this boiler I was watching you video was wondering how you turn on as if you want it without the timer as I am new don't know what do

@user-wt9gh3fj9y 8 месяцев назад

Hi Mark, thanks for the video. I have the version of this boiler with only the left hand screen i.e. no timer or dial. Is there a way to control the timing of the heating?

@bobmarley6161 Год назад

Hello I have this boiler.. When the heating is on after a hour or so it flashes 3.1bar.... Is this normal.... Or do I need to get it looked at.... It all seems to be working well... Thank you for your help....

@456Brian 2 года назад

hi Mark just a bit of advice please my so is going to fit a mixer shower and I'm not bad at DIY when connecting will turn cold water of question do i turn the boiler of as well its a combination boiler thanks Brian

@rameshb9525 2 года назад

Does the heating setting adjust the gas flow, or cycles full gas on/off?

@Andrew-hx6lm Год назад

I've got an Eco fit pure 418 vaillant boiler for my indirect vented hot water cylinder tank in my closet. Fitted 2019 and It comes with a condensation pipe too. The pre-set temperature was set 75 C, I've lowered it to 65 C for hot water and radiator just save a bit of gas and see if it helps the efficiency. I don't want to really go below 60 C that may create harmful Legion's bacteria in the cylinder tank. Can you tell me this is ok? Thanks

@bigbadwolf200335 Год назад

Hi, how do you change the settings so you don’t get constant hot water, thank you.

@krishnamehta4786 Год назад

Hi Mark.. need help...your video was great. My problem is that I need to pressurise boiler... the hot water valve is so so tight that I cannot move or turn...(2nd valve)..please how do I loosen it.

@steelcitydomains2356 8 месяцев назад

Just come to you as the same f22 after bleeding the rads up...just gonna sort it now all being well :)

@steelcitydomains2356 8 месяцев назад

Be back shortly to see how I got on....if I can do it ..anyone can following the amazing calm clear instructions :)

@foufdog 2 года назад

Excellent helpful video thanks you. I will check the comfort setting and temperature settings as you explained. My problem is the pressure keep going up to about 3.8 bar and then next day after the heating has been off all night it has only dropped down to 3.1 bar when cold I bleed a radiator and got the pressure down to 1.6bar then after the heating was used, it done the same again🙈 any idea what would cause this? I already had the service done and the plumber is useless, doesn’t seem to check anything and actually left us with a leaking magma filter which has now been replaced with a new one, which I believe was the fault of the plumber doing it up too tight🙉🙈 what a nightmare I’m having with this plumber, Please help

@danimayb 2 года назад

Pressure will always rise a bit and drop during the boilers operation, But should settle back to what it was set at. (Should be 1.5, or 1 at the very minimum). First, Make sure your pressure/filler tap is fully closed and you can't hear any movement of water coming from it in the pipe (If it is closed but still sending water in, Then plumber time). If you have a filter you can drain water from there, If not, the radiator is the only option as you did. If the pressure tap is fine and after draining water but still the pressure keeps rising as high as you say, Then you could have a problem with the expansion vessel inside the boiler which will need servicing - Either needs pumping up, Or it's too small for the job, Or is faulty. One other possibility is the pressure gauge is faulty, You never know just throwing that in there.

@foufdog 2 года назад

@@danimayb thanks for the reply. The expansion vessel was checked on the service 2 weeks ago and apparently it's ok. The filling loop is definitely not leaking as I just took that off the mains tap end to check the valves were not letting water past. Someone else said it might be a pin hole in the heat exchanger! I have dropped the pressure to 1 bar again with the system cold. Then turned the heating on, it went straight to 1.4bar with central heating on then was at 1.7bar when turned off after an hour or so. Next morning after being off all night from cold it was 1.8bar. so basically it is never returning down to original set pressure. Always slowly rising! I will call Valliant today as it's still under original warranty 😬 hopefully they can have a look.

@r3sid3nt3vil8 Год назад

hi i need your advice my ecofit pure only heats the hotwater for taps via the centrel heating if i turn of the heating (summer mode) even with the hot water temp set (50+ degrees) the boiler wont turn on to heat water either manually or via (old)honeywell control program , it wil only turn on to heat water when the radiator temp is set and then the radiator symbol flashes when it turns on i also dont have that comfy option when i press the hotwater settings is my boiler faulty?

@paulmurphy63 Год назад

Hi Mark - My new valiant boiler will not go above 60 degrees for hot water, that's the max setting. This is normally ok but sometimes it would be great to have the water a little hotter ie Washing up. Is there anyway of increasing this ? TIA

@kamalkamal2563 5 месяцев назад

we have same boiler but coft don’t showed. can i set for instant hot water when i turn the on tap ? pls let me know . thank you .

@crazyaboutmagazines Год назад

Is there any way to turn off Frost protection? It's a nuisance because my boiler regularly drops to 12 degrees and then the pump kicks in for an hour! This happens regularly when there is no chance of frost

@TheNailSpecialist Год назад

Hi Mark, I've had this boiler fitted and the hot water works fine I've atdjusted the temprature which was straight forward. I've gone to place the heating to on (I'm a cold person) turned up the Honeywell thermostat and the heating symbol and flame haven't appeared in the screen like in your video at 3:47. No sound to say the boiler is on. Is there anything I can check before I have to call someone out please? I've turned it on and off and tried again but still nothing, they didn't really show me how to use it properly or leave a user guide which is why I searched for your video. The boiler is just like the one in the video with the turning 24hr clock (Baffled why the whole thing isn't digital)

@cjonyeme Год назад

This is very helpful and thank you very much. Unfortunately, my water top up went up to 2.0 instead of 1.5. Please is there a way to reduce it?

@mob9334 Год назад

Drain water from 1 radiator, any radiator in house and then check the pressure

@Quidditch54321 Год назад

@@mob9334 Hi, the water pressure is too high on mine so I drained the radiator (actually water came out from the radiator immediately, so it wasn't that) and it is still too high, in fact the pressure has gone up. Advice, please.

@alfonsohorcajada4399 5 месяцев назад

Hi Mark, I have an ecofit pure and need to do a standard service, how much should i expect to pay for it in London?

@pennyfinzel738 Год назад

Have been all over RU-vid Looking for the Hot Water control, which is burning hot right now. I have the Vaillant ecoTEC Sustain Combi Boiler. Please HELP!

@lndlcy 2 месяца назад

I want to know how to raise the bars or tin the thing on and off

@sarahsarah4271 2 года назад

How do you get the egg timer symbol off

@nandiko123 Год назад

What do I do if I try to turn the heating off and it says loading and doesn't switch off?

@Judefornoreason261 Год назад

My Vaillant ecoFit Pure combo boiler doesn't have these two valves, but the pressure has dropped to 0.7. How can I put it back up, if I don't have the valves you have in the video?

@MarkBallardLTD Год назад

Maybe you have a filling loop. Check this video of mine a filling will work same on your boiler ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-G1qADHtsquM.html

@danishapereira8637 2 года назад

I can't seem to turn the valves. It looks like they're stuck. What do I do?

@barryewart3584 Год назад

my valient eco bolier as 3.2 on the led screen and the rads have never been that hot and all so the led screen wont stop flashing i turn the room temerstat down so boiler went off thought i might damage the boiler can anyone help and tell me if this is nomal or do i need a engineer thanks baz

@sarahsarah4271 2 года назад

Is it ok to have 1.8 bar

@veestar9837 7 месяцев назад

My mum passed away and someone switched her valliant off, how do I switch it back on?

@mikeys4u 5 месяцев назад

My rads are set to 70c but it heats up to 53c and does not get hotter. Rads are bled. Thermostat set high. It then goes to 40c and back in a loop.

@MrTheomighty1 8 месяцев назад

I’ve put mine in for the first time today so on the boiler my radiator setting is set at 45 given we are in today’s climate and prices are sky high. My thermostat on the wall in my hallway is set at 15. Why can we just not have 1 setting to warm up our homes. I’m a little confused as to why the boiler has its own radiator setting and then there is another setting on the wall in the hallway. I’m just watching my boiler temperature for my radiator. I have it set on 45 as I’ve mentioned but yet I have the radiator symbol flashing and it says 48 is this temperature going up because I have my water on the boiler set at 50 and it’s getting upto the 50 before it switches off, it’s hit 50 and now I have a flashing sand timer ⏳ flashing and my temperature has gone from 50 down to 42 and is dropping but my boiler is still making a noise it’s as tho is still operating it’s now on 41

@francaperotti8343 Год назад

My boiler is showing F 15 we have no hot water or heating need help

@unownnnn Год назад

Annoyingly the ecofit sustain model is missing those 2 switches for repressurisation, so I'll have to keep looking for a video for mine 🙄

@cathybruce10 Год назад

My display doesn't show the gage!

@Cashfizzy Год назад

it's not been helpful because my pressure is all the way to the top and you haven't taught us how to make it go back down

@MarkBallardLTD Год назад

That not to do with the boiling operation. That's probably been caused by over filling most likely. Just bleed off water from a radiator air bleed point may take some time but safest way.

@Cashfizzy Год назад

@@MarkBallardLTD ok

@Quidditch54321 Год назад

@@MarkBallardLTD Hi Mark, the water pressure on mine is also too high. I bled a radiator (it didn't need it) but the pressure has gone up. Advice, please. Thanks.