Check out Pt. 1 (plywood boxes) here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-trGsIg_D0mM.html Check out Pt. 2 (face frames) here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FM-vHUX4RqY.html Check out Pt. 4 (spice rack) here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gNgxr3OD_Jg.html Check out Pt. 5 (baking pan organization) here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8bDZoL3tkf0.html Check out Pt. 6 (shaker doors) here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--VTCq2thw5w.html Want to support the channel? Here's what you can do: - Subscribe to the channel - Hit that Like button - Leave a comment - Amazon Affiliate: amzn.to/2LaN1Ib In this video I go through the steps to build and finish the full extension pantry storage trays for a set of custom cabinets I am building for our laundry room remodel. I used hard maple for the sides and 1/4 inch plywood for the bottoms. No fancy joinery here. Just glue and reinforced with oak dowels. I used General Finishes water based high performance top coat for the finish. Be sure to subscribe so you don't miss future videos covering other storage setup and the doors. All of the build process for these cabinets could be applied to many other projects such as a kitchen, bathroom, etc. Let me know what you think in the comments section below. 22 inch full extension slides: amzn.to/3DF9F8p Rear slide mounting brackets: amzn.to/3Ynj2Dd SawStop 1.75hp PCS: amzn.to/2X4gWsP Ridge Carbide 10-inch Saw blade: amzn.to/3bATmcp Bosch 18v Drill: amzn.to/2OmrItJ Makita Trim Router: amzn.to/2TZFrcX Bosch 18v Jigsaw: amzn.to/3jDtxOA Bosch ROS: amzn.to/3rxri1W Titebond Wood Glue: amzn.to/2LzTdv4 Bessy Parallel Clamps: amzn.to/2z4LHG3 Bessy 6-inch F-style Clamps: amzn.to/3e3LGl4 General Finishes High Performance Top Coat: amzn.to/3CGhavk General Finishes Extender: amzn.to/3XtttVy Thanks for watching. If you have any comments or questions please leave them below or hit me up on social media or my website. Hit that like button and don't forget to subscribe! Thanks! Subscribe: ru-vid.com Twitter: twitter.com/DanPrudlow
It does work but I needed to take off 1/8 inch and with just the straight blades and hard maple I would have had to take a zillion passes so I just used the table saw. A shelix head is on my wishlist so once I get that I think it will be much more useful for me. Thanks for watching! 👍🏻
