No video :(

How to Paint Wood Paneling Like a Pro | Benjamin Moore

Подписаться 36 тыс.

Просмотров 293 тыс.

50% 1

How to Paint Veneer, Wood, or Faux Paneling like a pro. With the right prep work, you can transform your old paneling and achieve a beautiful new look.
Whether you have high-quality varnished hardwood, simple veneer, or faux paneling, painting over paneling can give you a fresh, new look. It also avoids the hassle of having to deal with issues with the wall surface beneath the paneling. The key to success is putting in a little extra time on the front end and prepping the old surface properly.
00:24 - Step 1: Assess the surface
00:31 - Step 2: Clean the surface
00:50 - Step 3: Spot prime the surface
01:11 - Step 4: Spackle and caulk seams
01:20 - Step 5: Sand, vacuum, and tack
01:29 - Step 6: Prime the entire surface
01:41 - Step 7: Paint the surface
#howto #diy #benjaminmoore #paint
Learn more at www.benjaminmoore.com
For more painting tips and inspiration, connect with us on:
Facebook - / benjaminmoorepaints
Twitter - / benjamin_moore
Pinterest - / benjamin_moore
Instagram - / benjaminmoore
Subscribe to Benjamin Moore's RU-vid channel: / @benjaminmoore

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 121

@TheOtteroo 7 месяцев назад

We just finished this project over the holidays. Three coats of spackle over two weeks sanding in between each coat, three coats of primer, and two coats of paint, and we still have lines. It's a nice fantasy thinking they'll disappear, but paneling lines never will go away. We should have gutted the room and put up drywall. Save yourself the headache and do it right the first time, there are no shortcuts.

@rollwtide88 7 месяцев назад

Add 1/4” sheet rock on top of it, No need to gut the room.

@jeremymitchell9970 6 месяцев назад

Exactly right

@jeremymitchell9970 6 месяцев назад

The electrical boxes will have to be replaced with remodel boxes, but 1/4 inch sheetrock would work

@kimb4698 6 месяцев назад

Weighing the very options of simply replacing w drywall. Seems a lot of work to paint 3 large 12 foot walls of paneling.

@midcenturymodern9330 Год назад

If I know life, 30 years from now we will see videos on how to uncover and restore that hideous 1970's wood paneling. 😂

@worldsheaviestjamband93 Месяц назад

Why would they paint over this amazing old wood paneling?!?!?

@I_AM_JOY88 12 часов назад

😂😂

@soapbox187 11 месяцев назад

So I am half way through this project in my basement and I can say you are better off leaving the grooves and just adding an extra coat of paint to ensure no dark spots. I did the spackle method in an inconspicuous area near a corner closet and it looks hideous as if an amateur drywaller couldnt tape a joint and Im pretty decent at drywalling. No matter how much you feather the light will always cast a shadow on the uneven part and make the grooves VERY visible. I left the grooves, added an extra coat like I said and made it look like an 19th century farmhouse wooden slats. It looks beautiful! Just budget for an extra gallon of primer sealer.

@scott1564 10 месяцев назад

I've used spackle on drywall holes and it works well, but it seems to bond to the drywall itself. My parents and I painted their paneling years ago without filling the grooves, it came out fine. It still looked like painted paneling, but it looked good. I'm not even sure we primed it, though we should have. Just 3-ish coats of paint. Anyway, I don't recommend spackle for reasons stated. It won't bond to the wood or veneer very well. It isn't designed to. Neither, for that matter, is caulk.

@soapbox187 9 месяцев назад

@@scott1564 i used three coats of primer sealer after lightly scuffing the veneer and ready for the top coat which i suspect is going to be at least 2 or 3 as well. The sealer adhered well it was just the dark panelling that really busted through.

@Mdesougi 9 месяцев назад

@@soapbox187can you post a video or pictures of the before and after ? Or maybe the after at least ?

@jeremymitchell9970 6 месяцев назад

Oil based killz works good for hiding slight color variations when painting paneling

@NYsFinestDiva 2 месяца назад

Next stop, my house 😅

@twofacepalmer1212 2 года назад

Even after painting - the panel seams are still visible (@2:03). I think it would have been better to have allowed time for the filler to cure, dry and shrink before priming. Sand where needed and then add more filler where needed.

@mahoganychinchilla 5 месяцев назад

By filler do you mean the spackle?

@justme8649 5 месяцев назад

@@mahoganychinchilla It looks like they used DAP spackle (kind of expensive I think ... what - around $10 for a 16 oz tub?). When I did mine, I didn't use spackle, I bought a bag of USG 'Easy Sand' 45 min. drywall mud because I had more than one room to do. A lot cheaper (it's also know as hot mud and you need to mix it with water). But yea... prime the grooves and then fill them in with whatever filler your using. Wait for it to dry and then sand. Look for any shrinkage and then use the filler for any shallow/low spots, sand and recheck. You'll need to use several coats of primer if your using a water based primer. If you go with an oil based primer... make sure you have any/all windows open and fan(s) going.

@twofacepalmer1212 Месяц назад

@@mahoganychinchilla Yes, filler = spackle, which is what they used in the video. But as justme8649 pointed out... drywall mud is a lot better.

@karinagomez9831 6 месяцев назад

Thank you for this video, I am moving into the house basement since my mom is moving in with us and the whole basement is an ugly brown wood paneling I can't wait to transform that space into my mini apartment!!! 😊👏👏

@sew04ss 4 месяца назад

Bless you for taking care of your mom

@kitten141234 3 года назад

Thank you so much! My parents house is like this and i want my room to be beautiful but the wood paneling is so ugly! :) now i know i can fix it and finally have a beautiful pink room

@madisonnunez4268 2 года назад

Me too !!

@madisonnunez4268 2 года назад

I wasn’t muñes white becuase it i want ti decorate my room a vintage Style, but the wood its not it.

@SK-qu4wo 2 года назад

@Queen Kay How did it go?

@EchoRhythmMusic 11 месяцев назад

Just bought a boat and this REALLY helps with my cabin

@randismathis 2 года назад

This video is so informative 👏. My home was built in the 1940s . My entire bedroom is shiplap and I hate it 😒. No insulation I believe because it's very hot in the summer

@RedceLL1978 Год назад

Well, probably better to insulate instead of just painting over it, don't you think?

@ShockResistor Год назад

Youre so lucky to have a home. Apartments are a nightmare.

@randismathis Год назад

@@ShockResistor Thank you 😊

@courtw3231 3 года назад

Thank you look like a process...

@ryonlyon 3 года назад

Good idea to smooth out the bead of caulk? Why use caulk and not just the patching compound?

@benjaminmoore 3 года назад

Thanks for the question. We recommend to apply caulking wherever there is a seam to lessen the likelihood that the paneling will shift, which can cause the paint to crack. We do recommend to smooth out the bead of caulk.

@sweetmslovinglife 2 года назад

Best demonstration and information I’ve seen.

@bettyanne8372 2 года назад

Thanks for all the info and tips in the comments. Question: Does the caulk need to dry before applying the spackle?

@benjaminmoore 2 года назад

Yes, the caulk needs to be dry before applying spackle. We recommend to follow the caulk manufacturer’s guidelines in regards to dry time.

@barbarachambers3759 2 года назад

What type of caulking is needed?

@benjaminmoore 2 года назад

We recommend using a paintable siliconized acrylic latex caulk.

@speedshack3366 2 года назад

Awesome video

@NottyGurlStyle 2 года назад

This is great! Can’t wait to get started

@noname-jh3bd 2 года назад

I am going to be closing on a house in a couple of weeks, and I have four rooms to take care of, that have paneling. Luckily, I have a power painter, so I have my work cut out for me... Great info though!

@NottyGurlStyle 2 года назад

Congratulations!! Same for me too lol there’s wood panels in the enclosed porch area that I want gone. This will definitely help.

@karinagomez9831 6 месяцев назад

Same here closing in march amd the whole basement is wood paneling.

@HappyH-25 2 года назад

How do I tell the difference between veneer and wood paneling?

@benjaminmoore 2 года назад

A veneer is topped with a thin layer of wood that is usually thinner than 1/8”.

@HappyH-25 2 года назад

@@benjaminmoore thank you!

@Catbirdmom2 3 года назад

I have previously painted paneling with crown moulding at the top and shoe at the bottom. I don’t mind the look of the lines but I HATE the little holes where the grooves in the wall meet the trim. What is best for that; caulk or putty?

@benjaminmoore 3 года назад

Thanks for the question. We recommend to use whatever you are more comfortable with. Caulk tends to be more flexible than putty. However, putty is typically easier to sand compared to caulk. If applied properly, either will work.

@KH-3414 Год назад

Spackle

@Elsa-qy9hr 8 месяцев назад

It shows caulking and spackling???? We're supposed to do both or one or the other??? Both seems a bit much

@skystormfishing 2 года назад

You can still see the lines even after he painted. It takes 10 coats of primer rolling sideways to completely eliminate the lines by filling them in, trust me.

@ryanking2859 2 года назад

Have fun when the house adjust due to weather changes.....that caulk will crack up and show all over that wall.

@daleblazer Год назад

Has anyone tried this and spray on texture after the primer? My daughters home has this, someone already painted over it but did not fill in the grooves. I will probably go ahead and do that then thinking of spraying on an orange peel texture.

@jeepgrand1994 2 года назад

I just ripped off the old paneling my parents had in there kitchen for over 30 yrs now. I put up nice wainscoting and almost finished. But, the living room is next w/the same paneling on it. Question, maybe 30 yrs ago they painted over it, do I still go through the steps of washing and light sand before or just fill the paneling lines because it already has paint over it?

@benjaminmoore 2 года назад

As long as the existing paint is clean, dull and dry, you can just apply new paint over top after filling the paneling lines. Since the last coat of paint was applied that long ago, the very best recommendation is to apply a coat of primer before painting. A great primer choice is Fresh Start High Hiding All Purpose Latex Primer.

@IIIllllIIIIlllll Год назад

2:03 still shows the gaps between panels. How do you prevent those?

@benjaminmoore Год назад

Great question! Using caulk or spackle to fill in the gaps prior to painting will minimize the gaps as best as possible.

@sarahbeee5240 3 года назад

Wouldn't joint compound be better than spackle? Definitely more affordable

@c50ge 3 года назад

I would think setting compound 1st would be stronger?

@twofacepalmer1212 2 года назад

Both spackle and joint compound shrink. You can still see the panel seams due to shrinkage @2:03, but I too would have gone with joint compound... just would have let the joint compound cure, dry and shrink 1st and then add more where needed before the primer.

@dominicsarria-wiley8985 Месяц назад

@@twofacepalmer1212Yepp exactly. Joint compound all the way!! Spackle sucks

@tanyakathy5987 Год назад

Could this technique be used to fill cupboard fronts with grooves? Is there a groove depth that is too deep for this technique?

@benjaminmoore Год назад

Hi! This technique can be used on cupboards as well, generally the groove depths on cupboards would not be too deep for the caulk. Please note however cupboards are usually painted with higher sheens like satin or semi-gloss and some of the pattern may still show through.

@karibgold5394 2 года назад

Caulking and then wood filler? Will the wood filler go over the caulking smooth? Seems kinda tricky to do this!

@benjaminmoore 2 года назад

The video suggests to use caulking on the panel seams (where two panels meet). The spackle should be used to fill in the remaining grooves of the paneling. If you have additional questions, please reach out to our product specialists directly at info@benjaminmoore.com.

@KH-3414 Год назад

What type of finish should I us, semi gloss or eggshell?

@benjaminmoore Год назад

Finish is a subjective choice, either would work well. The eggshell will show fewer imperfections than the semi-gloss but the semi-gloss will be easier to clean.

@Tippike 7 месяцев назад

What if the wood panel has been painted over?

@benjaminmoore 7 месяцев назад

If the panel has been painted, however, you are still looking to fill the seams, the spackling, sanding, and priming would still be necessary before painting.

@SVW1976 3 года назад

Can still see the lines.

@Catbirdmom2 3 года назад

They are better though. This isn’t a complete coverup. You’d have to put plaster all over the wall for that.

@SVW1976 3 года назад

@@Catbirdmom2 I would argue painting without filling those gaps like I just did looks much better. Otherwise just replacing with drywall is the proper way.

@Catbirdmom2 3 года назад

@@SVW1976 I sort of agree. I don’t mint the lines. I do mind the little gaps at top and bottom. So I’m filling them this afternoon.

@SVW1976 3 года назад

@@Catbirdmom2 We can agree on that. I dont like those gaps either. Are you planning on using putty or caulk?

@ParabellumX 2 года назад

I have over 20+ years painting and staining numerous surface areas. I once had to mask paneling lines in an elderly gentleman's living room and kitchen. No need for caulking; that's an overkill. First, apply two layers of joint compound in the lines. After completely drying, follow up with two coats of Kilz primer, making sure to cover the entire surface area evenly. Lastly, use a paint that has primer in it. The key to successfully hiding those lines is the generous use of primer (and making sure to sand that joint compound down evenly) before painting.

@arrw 2 года назад

What grain sandpaper should be used?

@benjaminmoore 2 года назад

A 180 grit sandpaper should be used.

@zombillyboogie9370 Год назад

What do we use to caulk what kind of fillers?

@benjaminmoore Год назад

We recommend caulking the seams with a product that is flexible and paintable. The filler is a regular wall spackle. Please speak with your local Benjamin Moore store for recommendations and availability.

@francischanbello 2 года назад

Do you have to use spackle after applying the calk?

@benjaminmoore 2 года назад

If the caulking fills in the grooves and dries flush with the paneling, you do not need to use spackle.

@Benary96 2 года назад

What should I do if I have sections of the paneling that is ripped away like there's still structure but the top layer is damaged would I just putty over it and paint like drywall or would what would I do? 🤔

@benjaminmoore 2 года назад

Thanks for your question. Please send your inquiry and pictures (if possible) to our product specialists at the following email address info@benjaminmoore.com for direct assistance.

@ChristopherJones16 2 года назад

Youre probably going to have to use Spackle to fill in what was ripped away to even out the surface just like you use Spackle to fill in the lines on the panels. Just do your best to get it flush and smooth with the rest of the panel.. apply more spackle than whats needed that way you have more room for error when sanding it away to make it nice and flush. Simply painting the damaged area will not hide the damage but only you know how damaged it is.. if its visibly damaged then yes you need to spackle over the damaged area or cut out the damaged area and patch it with another piece of paneling which will just created more seams that you will have to caulk.

@rmodglin9278 2 года назад

What kind of calk is best to use for this?

@benjaminmoore 2 года назад

We recommend to use siliconized acrylic latex caulk that clearly states it is paintable.

@stratplayr6997 11 месяцев назад

As someone who hates sanding, this would drive me completely insane. I'd rather just rip down the paneling and put up drywall.

@scottsatterthwaite4073 3 года назад

Depending on how the paneling is installed it is probably better to remove it. Most DIYers just nailed up the paneling without using any adhesive.

@awildelife 2 года назад

It depends. I don't wall behind my paneling and don't have the funds to redo half my house in sheetrock so this is a better alternative for people like me.

@cv7357 2 года назад

@@awildelife Me too:)

@ferasrn Год назад

This is a really good point in fact the most important thing missed in the video. If the paneling is nailed and alot of areas of sway and play.. meaning you push them in and you can see the lines or edges sometimes pop out...thats gonna be a waste of all that hard work. Either the panels get nailed really well which i still dont think it will hold up well especially if you have kids pushing around or u know... adhesive might help but removing them and putting adhesive sounds worse than just removing and putting up drywall and call it a day

@11ORTIZ11 Год назад

Just shoot staples in the seams or use sheetrock screws in the seans prior to caulk and spackle etc.... This should help. Also texture before painting would help hide imperfections. Good luck on your project

@shyjones6272 3 года назад

What kind of caulk are you using?

@benjaminmoore 3 года назад

Hi, that is a paintable siliconized acrylic latex caulk.

@iqrasaleem9490 9 месяцев назад

Hi! Can I use all purpose ready mixed joint compound as a speckling compound ? And if I am painting an eggshell paint over wood paneling what kind of primer should I need ? An oil based or water based

@benjaminmoore 9 месяцев назад

Hi! Joint compound and spackle are commonly used interchangeably. Spackle is better for slightly deeper repairs, while joint compound is used more for smoothing out a surface. Wood paneling comes in many forms therefore there are a few ways to tackle it. If you need any additional assistance with your project, please do not hesitate to give us a call at 855-724-6802 or email info@benjaminmoore.com.

@donnapalaussie19 2 месяца назад

Doing this at the moment…why do they make it look so easy? *sigh*

@jadeacampbell5206 2 года назад

So, Pay someone is what I got

@kaitlynjones3424 2 года назад

That’s what I learned too!! 😂 I don’t mind painting, but that’s a big nope.

@silviamc2117 2 года назад

What grade sand paper do I need for a veneer panel?

@benjaminmoore 2 года назад

We recommend to sand veneer paneling with 180-220 grit sandpaper. You do not want to apply too much pressure and just want to avoid sanding through the outer layer of the wood grain.

@pleasethink4789 Месяц назад

This is an advertisement for Benjamin Moore. Although it does mention the time frame, it doesn't convey how the end result is not worth the amount of effort expended. And, I am a full-on DIY-er who has taken on marathon projects.

@mikerad7424 8 месяцев назад

Too much work

@mattiemawmaw6120 2 года назад

Need sounds

@oneguy4199 Год назад

You can still see the paneling. Waste of time

@schallb6766 2 года назад

what a waste of time and money . FORGET adding caulk in all the lines. once you paint it and you step back 2/3 feet , you wouldn't see any lines any ways Just tell every one it's shiplap going vertical .

@sweetmslovinglife 2 года назад

Stupid and tacky. If you want a flat drywall affect, that vertical ship-lack mess will say it all. “Yeah I was too lazy to do it right.”

@karibgold5394 2 года назад

@@sweetmslovinglife Tacky? Lol. Just a different opinion. I have great taste and I'll opt for the "tacky" painted vertical shiplap look.

@FounderOf4 Год назад

You are.... Ridiculous

@dawnsjourney6973 Год назад

I don't want see any lines

@RedceLL1978 Год назад

@@karibgold5394Nope he's right. Tacky. And lazy.

@mattgloss8580 3 года назад

Wrong! Wash it first! Wear respirator and sand using dust extraction. Remove any dust residue.

@cv7357 2 года назад

He did say to wash it before sanding; said "start by sanding...but first you'll need to wash..." He should've just said to wash then sand, right... Totally agree about the respirator. Some people are so willy-nilly with projects and then pay for it later with serious health issues.

@UD2 3 года назад

probably cheaper to just change to drywall

@nubiasands9930 2 года назад

I still can see the paneling under paint. I rather do drywall over paneling

@pleasethink4789 2 года назад

@@hak1985org You might need to fill some nail holes in the drywall, but unless the panels are glued to the sheetrock behind the panels, I'd expect it to be way less work. You're not going to need to sand all the walls as you would with the paneling prep work.