How to paint your spoiler / wing 

😅 me to

No it was like a hard plastic

Are you in Phoenix AZ

I'll check it out

Thanks man 🙌🏽

You can cut and polish it the next day as long as it's dry but sometimes it can dye back and look not so shiny but you can let it sit and dry a couple more days if you have the time , some places might wait a while Till they cut and polish, but what ever works and the job is clean at the end 👍 , thanks for checking out the video

It was 800 Grit , but u can use water sandpaper 600 Grit is good to use to

@@josha7548 awesome absolute legend! I couldn’t get any 600 grit from the local auto parts store so I just got 800 wet/dry grit and I guess I’ll just work a bit harder. 1 more question regarding a crack, I’m going to drill the end of it to prevent further cracking but what would I use to fix the crack? There’s also a gouge/ chunk which snapped out of it so I’m going to build it back up with Fibreglass body filler, would this be the correct method of doing it? Thanks in advance I really appreciate it

@@flash52958 yeah fiberglass and body filler will be good, if you have a crack you want to sand or grind out the crack and then use fiberglass and body filler to fill it in

Amco finish 1

Yeah that will be fine to 👍🏾

hey! im getting my unpainted spoiler soon, how did the process go? any tips

Same any updates?

Thanks man, no problem

Thanks, and thanks for checking out the video 🙌

YeahLook us up apexwetwerk down town Phoenix

I got quoted 200 from a repaint shop

@@allmin6779 that's good price 👍

True, thanks 👍🏽

DeWalt buffer polisher dwp849x , I ordered it from Amazon

Ingersoll 60 gallon 5 horsepower

Yeah if there is no paint or primer on it is best to use the inhesion promoter but you do want to send it before the applying adhesion promoter with at least 600 - 800 Grit sand paper

@@josha7548 thank you !!!!!

@@l2eggyheavy488 no problem

Waxxing do u mean.cut and polish?

We have a shop now ,for a spoiler 250 -350 depending on color

@@josha7548 . It is lots of work. Thanks.

@@Indzeosko yeah the prep work is always the most time consuming, , and then material ain't getting cheaper

Lol , cool man , just try not to over think it even tho I always still do 😆 , good luck ,and thanks for check out the video 🙌

Right now to paint we are charging 250 -350 depends on color

@@josha7548 its a summit white. lmk donovanaldair02@icloud.com

I heard 2k clear gives a much better shine

Thanks man, Yeah I do greased it , I had to degrease it again because I had to move it around I try not to touch it after I do grease it

1.4 tip , and was a cheap gun I got from Amazon $150

Thanks bro , No just step 1 and 2 , it looks good with one and two maybe a show car you can do step 3 , thanks for checking out the video

Thanks man ,I appreciate that , thanks for checking out the video

Where can I find the adhesive promoter?

At a local auto paint supply store or you can find it on Amazon

@@josha7548 something like autozone, o’rielly?

@@review_u1587 no , go on Google maps and type in auto paint and supply,