Thank you so much, i ordered 4 of these to sell with android boxes im setting up as emulator boxes with 20000 games. I followed the directions on the paper with no luck.... thankful for your video because now they're working! Have a super day!!
You are very welcome! That sounds awesome! I used the controllers to play fortnight on my Samsung S20 ultra and they work awesome! Just don't go idle for more than like 5 mins or the controller shuts off, and u have to re sync and restart the app. Its cool though brcause it forces you to save battery life.
Thank you so much! i thought my newly bought controllers were defective,, they only worked for 1 day and can no longer connect the next day. Your video clarified all my doubts. thanks
I use them for HAPPY CHICK Retro Gaming App With Just About Every Game From NES To Dreamcast. Iz Hoping My Octopus Cord Comes Soon It's Like Your Other Stick Where It Has A Power Input & Output & 3 USB Jacks Too. Bummer As I The Wired Into The Internet Would Of Been Cool.
Thanks brother just ordered one. Had the same problem. Disclosure Nintendo switch controllers do not work it just keeps scrolling even the pro switch gamepads don't work for FireTV. It'll connect but games are not playable due to the scrolling movement. Hope this helps. Use the t3x3 to connect to any emulators on firetv
I've connected my controller to my firestick and can use it but it won't work with any happy chick games, when it says press start and I do it goes to an exit/restart screen and on the side are 4 boxes-- full stream-- load stream-- save-- advanced. No matter what I do it always take me back to this shit. Oh it is a second gen firestick by the way. Any ideas
I bought them on Amazon the instructions don't say what the name of them is. But there is a model number on the bottom of the instructions and it is BM-MJ600 Atleast I assume that is the model #. Just search Amazon for firestick gaming controller and look for the cheapest one and refer to my video to visually confirm that it is the same one. Important thing to remember is to make sure that before you order it it that it says that it is for sure compatible with the firestick and you will be fine. Otherwise, if you have a Playstation 4 or Xbox one bluetooth controllers they will pair up with the firestick as well. Hope that helps! God bless and thanks for watching! 😎👍
Yo thanks I rlly want to try this because I found out that u can download apps on firtv stick on the downloader I downloaded NVIDIA geforce now which is an app for games such as: destiny 2 Fortnite apex legends and csgo also assassin's creed I know that fire TV stick can't run these games so I used that cloud gaming app then use a controller and boom a console 👍
I also think this app is great for kids since they like games kids probably play Fortnite so u should download NVIDIA geforce now on the fire TV also u GET 145fps kinda crazy
I do not believe That you will be able to play with the controller while it is plugged into the wall charging because it goes into charge mode. I have not tried to plug it into a council via USB but if you have a way to plug it into whatever you're playing on it may be possible. I however have only used this with my cell phone and my fire stick which both do not have A USB let's be port that is compatible or available to plug in while I'm playing with it.
If your PC or laptop does not prompt you for a selection after plugging it in I would assume that it is charge only. Though ithough it might be a good idea to go into your control panel and select Is the USB drive Settings and see if there is an onboard setting in there. Not too sure there will be but definitely worth a shot. I know that when I plug my phone into my laptop it does give me multiple selection choiyeah selection choices but probably not going to happen for a cheap generic Chinese controller like this one.. My main advice would be to do what I did and order a second controller when one gets low swap out the controllers and Let the other controller charge. They are so cheap it would be worth it. And finally the only other option thinking outside of the Box here would be to look on Maybe amazon.com and see if they do sell an adapter that can run from your computer made specifically for this. Try searching for "charging/plug and play device/ dongle/extension/plug and play. Now thinking about it I did order a small adapter like that for my fire stick and it has USB ports that I use for for extra memory sticks as well as a place to plug in my Internet cat5 cable so I can run my fire stick at optimal speed and not have to use Wi-Fi signal.. I believe I briefly showed it in this video at one point. These adapters are super cheap mine I think was approximately $5.00 and the shipping costed more than the actual item. 😳
Not sure about that, mine was wireless. If you have to keep it plugged in, then wait until the light on the controller is off and fully charged. Then try the process that way. Should still work.
@@danhedden4522 thanks just ordered them via AliExpress. I will let you know the outcome when they arrive..the video was a great help in deciding which one to order.
Bro, i'm mexican, and I understood a little, sorry for that and I have the same problem for months, I have tried diferents models of joysticks, but I cant empair it, can you make a new video explaining better and slowly please ☹️🙏🙏
My dad bought them for my kids on Amazon. I have the paper manual here in front of me. I think the model number is BM-MJ600 and at the top of the sheet it says Bluetooth Android Controller (FW: V11) it says you can also press y + home button for 5 seconds and this will be the code to connect the iOS third-party operating and search newgamepad N1. (Whatever that means... maybe an alternate way to pair to different device?) It allso says you can press B button + home button for 5 seconds this will be the code to connect the iCad mode and search for gamepad. Hope that helped you out. Please let me know if you have any other questions and if this helped. Sorry for not responding sooner. God bless.
Make sure comtroller is charged. Try linking it to a smart phone 1st to ensure that it a working controller. Activate Bluetooth discovery on your phone and then hold down X button and then the home button for 3 quick seconds or until it starts to blink rapidly. When the controller blinks rapidly like that, it means its in sync mode. You may need to be standing close enough, not to close to device you wish to pair with. You may need to try a couple different times. Be patient. Good luck! Hope that helps!!! I linked mine with my smartphone and my kids and I use it to play fortnite. We also use them on the firestick as remote and for games. They work great!!!
Hold down the y button and then home for 3 secs This is an another pairing mode for wifi. X+home button should do it. Let me know if that works for ya bud. Good luck. :)
When mine is paired and no function either 2 things are wrong. The controller is set to player 2 mode, change it by pushing the ho.e button one time to move it to player 1. Player one has function control for the menu. Problem 2, my first remote will disconnect while trying to pair other remote. Make sure if you have other remotes in the pairing process do 1 at a time. And make sure to check manual or with information about whether its compatible with fire 4k.
