How to pour creamy nitro coffee, stout, or other nitrogen beers!

Подписаться 30 тыс.

Просмотров 27 тыс.

50% 1

Nothing is quite the same as a beverage with a luscious creamy head that is generated by a nitro spout and dispensed with nitrogen.
KegLand now has an awesome and economical solution to purchase food grade disposable inert gasses such as nitrogen.
Nitrogen cylinders can be purchased here:
www.kegland.co...
The regulators can be purchased here:
www.kegland.co...
If you want oxygen cylinders you can find them here:
www.kegland.co...
We also have oxygen regulators that you can find here:
www.kegland.co...

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@rob5831 5 лет назад

Excellent news Kee, great to see someone is finally making N2 and N2 Regulators easy to get. Keep up the great work. Cheers.

@KegLand 5 лет назад

Thanks Rob. Nitro beer here we come!

@GabrielYeager 2 года назад

I really wish we had these in this States. This would fit all my needs!

@googleuser4776 3 года назад

Hey guy, do we need to mix co2 with the nitrogen? I've heard its called "beer gas" which is a mix of both nitrogen and co2. Is this that or is it just pure nitrogen?

@KegLand 3 года назад

Some pubs do use beer gas to dispense Nitro beers. We have found that pre carbonating at 4 to 5 psi with CO2 and then dispensing at 35 psi on pure Nitrogen works for us.

@yotatrkr1 4 года назад

We need a keg land in Salt Lake City Utah!!!! Merica 🇺🇸

@Uf0z1 Год назад

Hi just got your kegerator and N2. Still abit confused how it all works. Do I carb with c02 then unhook hen put n2 on for serving?

@Cinetrade 4 года назад

Looking at doing 10L or so of espresso martini in a 19L corny. Should I purge remaining oxygen and then force carbonate for a few days before pouring? What pressure should I force carbonate vs dispensing pressure? Thanks

@technoart5516 5 месяцев назад

How to disconnect regulator from the cylinder?

@djelloulzaidi1016 Год назад

Hi, I have a question about using a keg system to prepare Nitro Coffee using a 4-kilogram nitrogen gas cylinder with a pressure of 40psi What quantity can I prepare until the nitrogen gas cylinder becomes empty?"

@KegLand Год назад

Unfortunately not that much. Unlike CO2 nitrogen is not liquified so it's not stored as dense in the cylinder. As a result you can expect 1 nitrogen cylinder to get you about 1 or 2 corny kegs.

@rhysrjones 5 лет назад

Do you need to carbonate a stout before attaching the N2? Or just fresh from the fermentation? And if so, whats a good CO2 volume for a stout when using the nitro?

@canadianbrewer 5 лет назад

1 volume.

@KegLand 5 лет назад

yes ideally a stout would have a small amount of CO2 dissolved into solution as well. so if you use a pressure rated fermenter like the FermZilla then the amount of CO2 from the fermentation process will be enough. Otherwise you might need to add a small amount of co2 with a gas cylinder.

@canadianbrewer 5 лет назад

Looks like you need to secure the cylinder to something or it may tip over easily.

@keglandau 5 лет назад

Yes we have not finished the cylinder brackets yet but these should be available soon.

@timquain5341 Год назад

Do you need to carbonate your beer before attaching this set up to your keg? I currently bottle my beer but want to do nitros. My impression was that I need to upgrade to forced CO2 carbonation in a keg and then nitro to serve (big upgrade). I'm hoping I can just add sugar to the keg and serve with this set up. What is the cheapest and easiest way to go?

@KegLand Год назад

It reallyh comes down to your recipe. A small amount of dissolved CO2 is generally desirable but how much depends on the recipe. Some beers will have more than enough residual co2 left over from the fermentation process.

@royjais7391 2 года назад

Hi,I’m Want to know if my 4ltr keg I bought from cina website ,my tank used charger but Can I change it to use tank,and how?

@KegLand 2 года назад

Yes you can purchase all the parts on our website www.kegland.com.au if you are in Australia

@stewartmanders2291 Год назад

I have seen in another video to get a corny keg lid with a carbonation stone. Thoughts on this?

@KegLand Год назад

Its probably a good idea for me to do a nitro video with the carbonation stone too. We have not done this yet.

@stephenyork7318 5 лет назад

So is it fine to just put the nitrogen cylinder inside the kegerator if you have a CO2 line occupying the hole in the back of the fridge?

@KegLand 5 лет назад

Yes this is no problem at all.

@Kwin9 4 года назад

How do you regulate the pressure? When I turn the handle it only affects the high pressure gauge.

@KegLand 3 года назад

The black knob on the regulator controls the low pressure side.

@Swans_And_Ducks 5 лет назад

Surely this is a 70/30 mix???

@KegLand 5 лет назад

This mix is 100% Nitrogen. Most of our customers do already have CO2 cylinders. So you can use your co2 cylinder to dissolve some co2 into solution then use nitrogen to dispense this is what some of our customers do with some success.

@renzotaboada4929 5 лет назад

@@KegLand I was thinking the same, you said this will last about 2 cornies, but is that calculated with the 70/30 mix, i need a bit more explanation on that please!

@tomdixon9803 4 года назад

Any advice on pressures and method to carb your 2l kegs?

@KegLand 4 года назад

It comes down to personal preference. What we do is chill the liquid to 2C, pressurise to 30psi, shake the keg for about 30 seconds, then pour.

@RollingEasy 4 года назад

Where can I get this Nitrogen in Perth please.....

@stuartmannering9154 4 года назад

Got mine from BrewMart, they are a KegLand stockist

@RollingEasy 4 года назад

@@stuartmannering9154 BrewMart in Bayswater? What do they slug for it? By the way, thanks for your reply...

@suwirwong 3 года назад

what is the preasure to use on N2? do we also use CO2?

@KegLand 3 года назад

We have had the best results going with about 4 psi of CO2 to carbonate and then 35 psi of Nitrogen to dispense.

@itsniallgrant 3 года назад

@@KegLand how long do you carbonate with CO2 at 4psi for, then how long does it need to be on NItrogen at 35psi?

@tomdixon9803 4 года назад

Will I lose gas if I leave the regulator connected to the cylinder? I'm using it to pour a couple of nitrogen cold brews each morning and have been disconnecting the regulator each day.

@KegLand 4 года назад

If you do a leak test to ensure you have no leaks then it should be fine. But as a precaution we generally tell people to disconnect it.

@elfillari 2 года назад

Any of these disposable cylinder regulators would not stand the 110 bar pressures, so it is essential not leave the regularor connected to the cylinder to avoid the leaking and emptying the gas out of that container! I repeat: ANY!