How to power a CPAP while Overlanding. 

The best version of this was shot on manual focus and completely blurry. Forgot to put af back on after shooting astro the night before. 🤣

These devices tend to draw different amounts of wattage as they run and it varies depending on settings so the easiest way is to plug the power chord into your ecoflow and run the device. As it runs, look at the battery display and pay attention to the watts being used. Take the highest wattage it shows and assume it will draw that many watts per hour. That’s a very rough estimate but it will get you by enough to do some power need calculations. The dc connector I use is proprietary to my brand and model, so you’ll have to do some research to find what dc plug will work with your Phillips cpap as I don’t own one so I don’t know specifics. For solar panel cables, that will also depend on what type of solar panel you have and what connectors it uses. Most use an mc4 connector. The instruction manual should list that. Once you find that out, get that type of connector on one side of the cable and on the other side make sure it has an xt60 or xt60i connector, as that’s what the Ecoflow brand uses. I’d recommend xt60i as it can push more power into your battery. Amazon has lots of cable options. Hope this helps!

Next video: how to use your cpap as a bear defense.