HOW TO PROFESSIONALLY CARPET A PLY PANEL

Подписаться 77 тыс.

Просмотров 174 тыс.

50% 1

Learn how to professionally carpet a ply panel, with 4-way stretch carpet and then fit it to your camper.
The van in this episode is a short wheel base Mk 6 Ford Transit. We had previously carried out a 'Day Van' conversion to this van and the sliding door panel was the last part to be completed.
SHOP:
💳 CARPET LINING and GLUE: www.combevalleycampers.co.uk/...
🛒 SOUND DEADENING/INSULATION: www.combevalleycampers.co.uk/...
🚐 CONVERSION PARTS: www.combevalleycampers.co.uk/...
💥 CAMPER VAN INSURANCE: www.combevalleycampers.co.uk/...
⭐ BECOME A PATRON: / combevalleycampers
🎬 HOW TO PROFESSIONALLY LINE YOUR CAMPER VAN WITH 4-WAY STRETCH CARPET - Do it yourself, at home! - • HOW TO PROFESSIONALLY ...
📓 CARPET LINING BLOG: www.combevalleycampers.co.uk/...
⏱ Time stamps ⏱
0:00 HOW TO PROFESSIONALLY CARPET A PLY PANEL
0:01 Introduction
2:26 How to remove factory trim clips
3:52 Trimming the carpet to size
5:20 Ply panel preparation
6:30 What adhesive to use
7:20 Applying the adhesive and carpet to the face of the panel
8:44 Preparing the carpet to glue the underside
9:03 Preparing the corners of the underside
10:50 Applying the carpet to the underside of the panel
Feel free to ask any questions down below and don't forget to give the video a thumbs up and subscribe to our channel! 👍
To see more of our projects and services, please visit
🌐WEBSITE: www.combevalleycampers.co.uk
🌐FACEBOOK: / combevalleycampers
🌐INSTAGRAM: / @combe_valley_campers
🎥Filming and Editing: Ali Jassim / just_jassim
Disclaimer:
Due to factors beyond the control of Combe Valley Campers Ltd, I cannot guarantee against improper use or unauthorized modifications of this information. Combe Valley Campers Ltd assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Combe Valley Campers Ltd recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Combe Valley Campers Ltd, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Combe Valley Campers.

Авто/Мото

Опубликовано:

18 май 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 69

@yaface120 9 месяцев назад

Really usefull, i was tearing my hair out trying to do the corners! The triangles work great

@johnvancamper9581 5 лет назад

Hi from 'up North' Great videos. Newly subbed. Ha ha just mistyped dubbed ! Really generous of you to share your insights. Also well made and presented so easy to follow with just the right amount of detail. I watch a lot of these videos and yours are some of the best. At 1st I wondered if it was wise for you to share so much that allows owners to do it themselves but after watching I reckon you'll gain many more customers than lose to DIY enthusiasts. You come across as a very genuine and knowledgeable builder who takes care in his work. Good stuff this camper business. Happy travels everyone. John

@CaptainCaveman01 Год назад

Top notch tutorial. I'm currently doing a partial conversion so my Expert Tepee can be used as a camper when I'm not using it for deliveries. Just carpeted my first rear door panel with the help of this video and I'm really happy with the results

@gordonmoore4356 3 года назад

Great video, very clear and detailed. Should make my attempts pretty simple, thank you

@Degga911 3 года назад

The triangle tip is a great idea. Many thanks

@itstomsgarage 8 месяцев назад

I'm about to do this for a boot build and there was a bunch of stuff in here I would never have thought about. Thanks a lot!

@jeffwarner2049 3 года назад

excellent videos and incredible work - thank you!

@petksaaj 4 года назад

I seen most of your vedios Just my comment to tell you You are very good man to teach people's very nice that mean your heart very good Thanks Thanks wish for you good luck firever I am from saudia arabia

@johncooper7242 4 года назад

thats a brilliant tutorial thank you. This video has answered all of the questions I had about doing this job on my Transit campervan this week I now have the knowledge to order the correct ply , trim fixings, carpet and adhesive and do the job with complete confidence . Cannot thank you enough

@CombeValleyCampers 4 года назад

You are more than welcome John. Happy to help

@drastikproductionz 5 лет назад

Great tips, thanks. I will be re doing mine soon as they have started to come off!

@CombeValleyCampers 5 лет назад

Excellent! Thanks for the support Luke

@bencrosbie 3 года назад

Wow i learned alot about the cuts and fold thank you.

@Max6s 8 месяцев назад

Great video

@1.9.8.3 Год назад

Good craftsmanship right there 😁

@deltajohnny 2 месяца назад

Great video! 👏👏👏

@PrimalOutdoors 3 года назад

Thank you 🤙

@TT-it6cr 5 лет назад

Great video's, i'm learning a lot and i don't even have a camper van! Keep up the good work guys!

@ducla3429 3 года назад

Hi guys,I love your videos. Good explanation ,excelent hand hability and easy talking I´m plannig to make a small transformation in my VW CADDY MAXI Hope it will be closer then your works,but I keep praying

@MtbTrailHub Год назад

Thanks Lee, really helpful video. 👍 First timer here giving it a crack this weekend….Wish me luck!

@vincentlehmann646 4 года назад

top work, regards from CH

@chuckpechan 4 года назад

Great video, very informational...I hit subscribe and like!!

@CosgroveNotts 4 года назад

Nice job

@malleenos 4 месяца назад

You can also clean the nozzle by spraying the can upside down for a few seconds until it runs clear. Just another way

@johnlewis2624 2 года назад

Thank you

@dannyfag1 3 года назад

Great tips, may try fitting mine when the vans empty though.. Lol.

@jamesgoodwin2450 5 лет назад

I’ve always wanted to know how to do this

@nicholas763 5 лет назад

you should get a self healing rotary cutting mat for that table

@gerryskelly3845 Год назад

Hi Lee great video and lovely job .I have a t5 and the sliding door the door card is missing I can make one out of ply but don't know how to mark the holes for clips any help would be appreciated

@percy3815 3 года назад

Hey guys! Awesome vid thanks for the help! What would you suggest doing to the non-carpeted bits of the van in this instance?? Ie your ply lining is carpeted, but for example the pillars (or portions of the pillars) won’t be... should I carpet the pillars separately and just butt the carpeted ply lining against them if that makes sense?? Cheers

@jeremybromfield9348 4 года назад

If I want to fix the carpeted panels/door card and not use the factory trim clips i.e. the upper panels to the barn doors what is the best method for fixing them?

@karlcrozier3454 4 года назад

What lights and dimmer did you use? Thanks

@STFUandRTFM 4 года назад

Any chance we could get a peak at your motorcycle setup?

@steveh1844 5 лет назад

Great tips, what would be your suggestion for the door frame? Understanding you don't want to go past where the seal meets. Trying to workout how to finish the carpet where its been trimmed.

@CombeValleyCampers 5 лет назад

Hi Steven, thanks for your comments. I would suggest marking where the rubber meets the metal work of the door frame and carpeting to that line I've found it best to just cut a nice clean edge using a new sharp blade and glueing up to the edge for a nice clean look

@robertdyer8914 3 года назад

I’ve got a t6 kombi. Would you recommend carpeting the original grey door cards (which are in pretty good condition) or is it best to buy new ply-lining and carpet that?

@Adventure.with.Robbie 12 дней назад

If installed a panal with screws. Are there any tips on hiding them ?

@DanLee1969 4 года назад

I need to do the inside of a motorcycle trunk that is very boxy. Pretty much a box with rounded corners. Would you start in the middle of the bottom, and work to the sides? And is it possible to do the inside rounded corners without cuts? Or is a cut in the middle of the corners the best way?

@sudvag 4 года назад

Would you say 80C degrees glue resistance is high temperature glue?

@humberger2011 9 месяцев назад

❤❤❤❤❤❤

@brainspace3133 4 года назад

Thank you for the great video. I am doing my 2019 Hyundai iload and cant workout how to get the sliding door panel off. It seems to be stuck around the door handle. Any ideas ?? Thanks.

@shane555 4 года назад

Is it possible to use plastic fasteners (with a flat profile head) and put them behind the carpet? That's what I'm going to look at trying. Then I get the best of both worlds, a nice clean finish and also access if needed in the future. Just need to see if the carpet will cover the plastic clips and not have little bumps visible!

@CombeValleyCampers 4 года назад

Yes of course. Take a look at Harrison trim supplied website and look for invisible trim fixings

@shane555 4 года назад

@@CombeValleyCampers grand, thank you 👍

@Jay-qe3jz 4 года назад

Plastic van lining can that also be trimmed with carpet ? Thanks

@CombeValleyCampers 4 года назад

We don't really use it so I can't reccomend any really dude

@biglaff5411 3 года назад

u know this van mate could you supply the roof panels? i have a swb mk7 transit i want a roof for

@CombeValleyCampers 3 года назад

I buy the panels from Custom shop designs online

@rvvanlife Год назад

👍👍👍👍

@davegoslingphoto 5 лет назад

Can you get blind clips so they aren't showing?

@CombeValleyCampers 5 лет назад

Hi Dave, yes you can, and we use them often. 8n this case the customer specified he wanted the original clips back in

@CombeValleyCampers 5 лет назад

Hi Dave, Yes you can buy blind, or 'invisible' clips and we use them a lot in our builds. In this instance the customer was happy to keep the factory clips. Thanks for your comment, Leigh

@Coquillages 5 лет назад

Is it possible to keep removing a panel with invisible clips or will they break and need replacing every time the panel is removed?

@HM.Hatchet205 5 лет назад

Hi i have the same van anychance u can give me an idea how u done the headliner? Or can u do a video Thanks :)

@CombeValleyCampers 5 лет назад

In this instance we made our own headliner and secured to the roof using Batons

@HM.Hatchet205 5 лет назад

@@CombeValleyCampers ok grate thanks do you do it in once sheet of two parts?

@CombeValleyCampers 5 лет назад

@@HM.Hatchet205 we did it in two parts. If I remember correctly you will need two 8'x4' sheets of material as the roof spanned just over 4' in width

@jojjen09 4 года назад

Please balance your music volume to your talking, it's way off, either I don't hear you when talking, or I got my ears smashed when the the music comes on. You are in good company with many others on RU-vid. Besides that a great channel. 👍

@CombeValleyCampers 4 года назад

Hi! This was one of our first videos, and it shows in terms of levels! We are not video makers first, but camper builders. However we are getting better every video! Thanks for your comments :)

@alexg4504 2 года назад

Hi, where can I get that carpet?

@CombeValleyCampers 2 года назад

From our website! We sell carpet in 5 different colours and the adhesive too! www.combevalleycampers.co.uk

@stephan20008 5 лет назад

Where are you based??

@CombeValleyCampers 5 лет назад

Hellingly, east Sussex

@edinburg3519 4 года назад

Dust Mask Man! those wood fibres will stay in your lungs and GET YOU!!!!

@johnlock3640 3 года назад

Woodprix is nice for that.

@CosgroveNotts 4 года назад

I hate carpet, especially grey. Reminds me of council houses.

@kassiedreaneai7459 4 года назад

I am sorry to say your videos annoy me and make them not worth watching; because your speaking is quiet and the music you keep inserting is way too loud making it necessary to frequently adjust the volume. From what I have seen you probably give good information but if you cannot sort that wild variation of volumes I cannot be bothered wasting my time watching them.

@CombeValleyCampers 4 года назад

Hi Kassie. We are aware. These are some of our earliest videos, and we didnt get it quite right. However, we are 9 months, and 42 videos in at this point, and id like to think we have improved. Thanks