How To Properly Apply Threadlocker

Подписаться 131 тыс.

Просмотров 94 тыс.

50% 1

We have noticed the bolts failing on some of the machines we have built (such as the CNC and Plastic Injection Machine), and after further investigation we found the issue to be in the way we applied the Loctite Threadlocker.
We made a quick video to demonstrate how to properly apply the thread locking fluid (thread locker) to threads in order to save you the trouble of failing screws in your builds.
Ways To Support Our Channel:
Merchandise: actionbox.ca/c...
Become A Member: / @actionbox
We built a CNC Machine
• Homemade CNC Machine! ...
We built a Wire EDM
• How We Made A Wire EDM...
We built an EDM Sinker
• Homemade EDM Sinker
We built a Plastic Injection Machine
• Homemade Plastic Injec...
We built an Anodizing Setup
• Homemade Anodizing Setup
We built CNC Router
• HOMEMADE CNC ROUTER.
#Loctite #Machine #Bolts #Nuts #DIY #CNC #tools #homemachineshop #shop #mechanical

Опубликовано:

16 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 106

@GeneralChangFromDanang 2 года назад

Ha, joke's on you. My holes always end up oversized as I'm a shit machinist so no airtight blind holes for me.

@ActionBOX 2 года назад

HAHAHAH 😂 . This comment was so funny, you made my day. Hope you enjoyed the video regardless and thanks for watching 😊. Cheers, Dave

@teeambird2079 8 месяцев назад

Lol

@emkoravo 3 месяца назад

😂

@sarganis2576 2 года назад

This minute was one of the most useful minutes I've ever spent on RU-vid. Good job!

@ActionBOX 2 года назад

Hahah thanks Yuri. Feel free to help us out and share our video with others. We are trying to boost our channel by getting more views. Looking forward to your comments in our future videos 😃

@DennisGentry 8 месяцев назад

I wouldn't do this into a blind hole on an engine casting unless I knew it was a loose fit. It's surprisingly easy to crack the casting when you torque the bolt into the blind hole with uncompressible liquid below it. (This is one reason to always blow out holes with compressed air before assembly.). On the other hand, I can't think of engine casting holes that call for threadlocker, usually just a specified torque, so it probably won't matter.

@jackbooten2681 Месяц назад

Glad you pointed that out, clean the bolt holes of coolant, oil or parts cleaner. it's called hydro something

@drewgossage8842 2 года назад

The loctite rep always said to do the same. But this is a fantastic visual representation of why, that i haven't seen before. Thanks for sharing👍👍

@ActionBOX 2 года назад

Thanks for the comment! Glad you found this helpful. Feel free to help me out and share with a friend :)

@Ktron99 2 года назад

Fair enough unless the threads a tight tolerance, you'd end up hydraulicing the hole, common on engine bolts when there's oil in a hole it cracks the casing

@thewespaul6520 2 года назад

Can’t believe this isn’t mentioned more here, this is why you don’t do this method.

@bronzemoongames Год назад

He is actually right about the principle but the execution is not 100% correct. Loctite advices to apply the threadlocker to the 3rd or 4th thread from the bottom on the threads of the body. So, that there won't be any remaining adhesive, which stays uncured.

@ytubeanon 8 месяцев назад

I suppose the solution is to apply threadlocker to the bolt, screw it in and see if it bubbles out - no: leave it, yes: remove bolt, drops into hole then screw it

@elebeu 5 месяцев назад

That was my first thought also.

@clivevreeswijk4555 4 месяца назад

Absolutely, I had it happen with too much loctite on a motorcycle case, thankfully it just popped out the end and didn't ruin the whole thing, used a copper washer to prevent oil leak.

@chadkulikowsky5162 6 месяцев назад

We at my place of busniness have devoloped a better version on threadlock. We call it CROSSTHREAD.

@korabeats_ День назад

🤣 Yep! Your guys' crossthread is the best I've used to secure my bolts.

@williamweatherall8333 2 года назад

I like how short your videos are. Like, just the perfect length for what you are trying to show

@ActionBOX 2 года назад

Thanks William! We try to keep them concise and to the point 😃 Stay tuned for more awesome content!

@mortarriding3913 2 года назад

Thank you algorithm. I was just about to do some threadlocking.

@That.Guy. 11 месяцев назад

I was actually looking at it on Amazon which makes me wonder how are RU-vid knows about it

@manudehanoi 2 года назад

short and to the point i love it

@ActionBOX 2 года назад

Thanks 😃, we aim to keep our content concise for our viewers’ convenience. Glad you enjoyed, and don't forget to help me out by sharing with a friend. Cheers, Dave.

@JB-pb9xv 11 месяцев назад

This actually answers my question better then allot of the videos testing these. Because the difference actually depends on whether you have an open or closed / blind hole that you're screwing into. As to how the thread locker will apply.. My other question which I think would help in these closed ended holes as well. Is whether you should allow the Loctite to cure for awhile, before driving the screw in..

@ActionBOX 11 месяцев назад

Awesome, I’m glad we could help. Many Loctite thread lockers are anaerobic adhesives which means they harden or “cure” in the absence of oxygen. Hence no need to wait. Hope that helps. Cheers, Dave

@mikegLXIVMM 3 месяца назад

Another tip: keep thread locker away from acrylics. Even a small amount will destroy the acrylics.

@GBWM_CNC 2 года назад

Didn't know that. Waiting for more from you guys!

@ActionBOX 2 года назад

Awesome, thanks 😃. We will be releasing a couple more videos over the next few days. Looking forward to your comments there 😉. Cheers, Dave

@OneFlash 10 месяцев назад

quick and on point! thank you! 👌

@ActionBOX 10 месяцев назад

Glad it helped! 😄

@TheMadMagician87 2 года назад

Hmmm, such a simple tip but so worthwhile. Cheers.

@ActionBOX 2 года назад

Thank you 😊. Feel free to help us out by sharing the video with a friend or two. Cheers, Dave

@shawn576 Месяц назад

Quick and to the point. Thanks!

@ActionBOX Месяц назад

You're welcome!☺️

@johntechwriter 7 месяцев назад

Very informative, and just the right length. Top marks.

@ActionBOX 7 месяцев назад

Thanks John! Glad you found it useful 😄

@far1002 2 года назад

Lmao 🤣 I’ve always know this I just thought I was wrong 🤣🤣. This the reason a lot Bmw cylinder heads lift!! Service manual instructions lol

@chemicalcorrosion 2 года назад

Several years ago I used thread locker on an Anet acrylic 3D printer build. The entire thing CRUMBLED due to the thread locker affecting the acrylic.

@ActionBOX 2 года назад

Fair Point. We simply used acrylic for its clear properties in order to make this phenomenom visually evident. Hope you enjoyed the video regardless 😃

@chemicalcorrosion 2 года назад

@actionbox 👍very good demonstration.

@UnvarnishedTarnished 2 года назад

@@ActionBOX When should you use thread locker / when shouldn't you? I've never used it before

@ActionBOX 2 года назад

@@UnvarnishedTarnished use thread locker anytime your bolts go on something that vibrates or is exposed to vibrations. Hope that helps 😃. Don’t forget to share

@UnvarnishedTarnished 2 года назад

@@ActionBOX Great! Thank you so much for the quick reply. Subscribed!!

@durimmiziraj4815 2 года назад

Apply it to the bolt, and let it dry. The technique is good enough for car manufacturers.

@ActionBOX 2 года назад

Good to know. Thx

@bernardmclake3898 3 месяца назад

Different product used for pre-applied thread locker. It consists of micro spheres with the anaerobic thread locker inside. When the threads engage, the micro spheres tear open and the thread locker can do its job.

@babblo 3 месяца назад

Everybody is gangsta until your bolt goes upside down.

@shroey20 7 месяцев назад

I dont understand. What's a blind hole?

@Keri-hl7qk 3 месяца назад

When the hole don't go through the material

@ToeCutter454 5 месяцев назад

betting this stuff is probably different from the pre-coated bolts you get with some fasteners that have a ring of blue loc-tite on them otherwise you could just go the route of putting it on the bolt as such, letting it cure for a day or two then using it when you need to and the friction creates the bond when you run the bolt into a threaded fixture.

@nick066hu 27 дней назад

I guess when I apply this technique on thru-holes, it has the reverse effect: ..and even worse I got all the threadlocker on my shoe :-) Just kidding, great video!

@ActionBOX 25 дней назад

lol

@dancruze Год назад

Thanks

@ActionBOX Год назад

No problem 😄

@TheGmanway 15 дней назад

It’s below -30 f at my work so we just spit on the bolt glides in smooth and holds on extra tight

@clypeum5063 2 года назад

Hey man, can you make some more Projects with masso? Im really liking the Idea of the Board but here in Europe the price after taxes is almost 800€...

@ActionBOX 2 года назад

Absolutely, I will but not in the next little while as we are working on another really unique machine that does not rely on Masso, but pure code instead. Thanks for supporting the channel 😃, Dave

@ifell3 2 года назад

How much thread locker do you use aha. Never knew this, thank you!

@ActionBOX 2 года назад

No problem. Glad it helped. I use a few drops. No more usually.

@andyspoo2 2 года назад

That's OK if your threaded hole doesn't go all the way through, which many do. What's the best method if the hole does?

@ActionBOX 2 года назад

Put a line down on the internal threads would be my guest. Although there are other great options for open ended holes. Cheers

@ghostid544 2 года назад

Locktite made a similar video a few years ago showing this for blind holes.

@fahb68 2 года назад

great

@ActionBOX 2 года назад

Thanks! 😀

@prithvirajfasale4155 3 месяца назад

How to remove screw after using locktite

@h0cusf0cus Месяц назад

what if theres an open hole at the bottom?

@tompetry8589 Месяц назад

What if you’re bolt is horizontal?

@GamingLiveHDChannelPH 6 месяцев назад

So can someone have an tutorials on Laptops especially the LCD Hinge part?

@theharvestfloor1 9 месяцев назад

I tried this, but all the threadlocker fell out the hole straight away.

@byron3373 3 месяца назад

I may be wrong but I think that method could cause a hydraulic lock, not good then .

@warrensavoy4131 24 дня назад

Let’s start at the beginning. Clean with alcohol. No thread fiber cloth. You touched the applicator tip to the bolt the bottle is now contaminated……..less is more with loctite. A couple of drops will suffice

@toddparsons2980 2 дня назад

👍

@Megiddo426 7 месяцев назад

But what about a REGular non-blind hole??

@ahmedhaiba-ng8dz 5 месяцев назад

How to apply if iam gona attach two objects

@ameliabuns4058 2 года назад

I felt very betrayed when I found out this stuff harms plastics :c wish they had a plastic friendly solution that wasn't based on superglue! I have metal nuts in my parts but they have to pass trough plastic

@ActionBOX 2 года назад

I would agree that its never fun to find that out the hard way 😢. I do believe there are plastic safe alternatives but I assume they are much more expensive. I guess we have to work with whatever is within our budget as hobbyist 😜. Thanks for supporting the channel 😃, Dave

@Trent-tr2nx 2 года назад

Loctite 425 or Plastic Assure Threadlocker is safe for plastic-- It's cyanoacrylate based. Maybe it's just a fancy super glue. Also take a look at Vibra-Tite VC-3 which is a removable threadlocker not made by Loctite that should work with plastics.

@ameliabuns4058 2 года назад

@@Trent-tr2nx i don't think vc-3 is made by loctite, But I always wanted to get some, hard to in my country, and priceeeeey

@LeNoLi. 6 месяцев назад

What if the thread is upside down so the liquid will fall out

@Majlis-Alalaiwat 11 месяцев назад

What if it is throgh haul?

@badgt1974 3 месяца назад

I think that's way to much Threadlock, I do it the same way but all you need is to put a little bit on one side and it will still cover the bolt as you thread it in.

@hamidizadi 10 месяцев назад

What if the hole is upside down?

@ActionBOX 10 месяцев назад

Then you have bigger problems 😜

@GUCR44 2 года назад

Could get hydro lock if you use to much.

@ActionBOX 2 года назад

What’s that? Please enlighten me. Thanks 😊

@GUCR44 2 года назад

You can fill a blind hole with fluid (oil/thread lock) so when you screw in the fastiner it can blow out the bottom of the housing from extreme hydraulic pressure.. Old chevy water pump housing and blue rtv in the hole is how I learned this.. Peace man

@robert5 2 года назад

Thumbs up.

@ActionBOX 2 года назад

Thank you 😊

@mikecunningham3423 2 года назад

This only works in blind holes

@ActionBOX 2 года назад

As stated in the video, Correct.

@OEMPlus 2 года назад

woah. dude. okay, im a dummy. shit.

@ActionBOX 2 года назад

Haha glad the video helped! Never too late to learn new things 😉 thanks for watching and supporting our channel! - Dave

@jimmyurbanski4970 10 месяцев назад

Understandable....yet. Good luck on trying to remove the bolts when needed. The thread locker is only supposed to be applied sparingly per application "a drop across a few threads" Then allow to fully dry and cure before fastening in the hole.

@ryanokeefe12 8 месяцев назад

I think you've misread the tech data/user guide for this stuff. It mentions letting the threads dry after you clean them... not letting the thread locker dry. Thread locker is anaerobic, meaning it dries in the absence of oxygen. It will never cure before installing it. It also acts as a sealant and lubricates the threads before it dries so that you don't get binding. Unless you're using a specialist formulation, it's not possible to allow it to dry before installing the thread. Even if it could dry, it's not the correct method.

@ascgyu 10 месяцев назад

Never fill the hole with thread locker !! How will you remove it ? Its not glue.... its thread locker. If you do that on a gun, you are in a bad shape.

@ActionBOX 10 месяцев назад

I’m not sure what you mean, this product is used all the time in practically every manufacturing industry. Is there a specific reason not to use it in a gun? You can always get different grades of strength. I’m a little confused 🤔

@tallisman57 2 года назад

This is one of those duh moments when viewing the world as a whole... If people continue doing things that are inferior and not come to a conclusion on the own especially when it's this simple of a task, it doesn't say much for our future now does it. It has become known recently that the planet the whole, people are becoming dumber and dumber.... Well let me back up a hair, the dumb are becoming dumber, while the intelligent are becoming smarter... Although this video might be necessary, it never should have become necessary in the first place.

@ActionBOX 2 года назад

Hmmm. I’m not sure I would consider this totally intuitive, otherwise I wouldn’t have made the video 🤔. I think some people just have less experience, and this video is there to help them out 🤷🏻‍♂️. Hope you enjoyed the video regardless