How to put a Worcester Greenstar Ri in to service mode

Подписаться 17 тыс.

Просмотров 19 тыс.

50% 1

Today it is a very short video on How to put a Worcester Greenstar Ri in to service mode or min / max mode for commissioning and servicing purposes.
High fire and low fire modes are used by service and repair engineers when work is being undertaken on a central heating boiler, This work is for reference and training purpose only and must be undertaken by individuals who are competent to do so.
#worcester #boiler #centralheating #boilerservicing

Опубликовано:

16 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@SteveHarris-ff2zi 5 месяцев назад

Thanks for this super helpful video Dan - it saved my day. I'd just finished a chemical clean of my F&E central heating system and after refilling the system and bleeding the radiators, turned the boiler back on. There was clearly some air affecting the boiler operation as it tried to come on, fired for a bit then cycled off. Going through your re-commission process and running the system at max for around 20 seconds did the trick.

@PlumbingGy 5 месяцев назад

Excellent glad it helped hopefully you can subscribe 👍🏻

@SteveHarris-ff2zi 5 месяцев назад

@@PlumbingGy It also helped that I found the Instruction Manual online and identified the bleed valve inside the boiler. There were a lot of air pockets to disperse and this all helped.

@BlueMax333 7 месяцев назад

Is it possible to fit a timer that controls hot water and heating separately? So that hot water and heating can be operated individually? Thanks!

@mshingify 11 месяцев назад

Hi, I’ve just bled my radiators. How do I check pressure / repressurize the system on this boiler please?

@martinrush6829 5 месяцев назад

🙌Thankyou, you solved my issue mate, really didn’t see that reset until you pointed it out😂

@PlumbingGy 5 месяцев назад

Glad it helped 💪🏻💪🏻👍🏻👍🏻

@andrewhull6776 11 месяцев назад

Thanks for video

@jasman71 11 месяцев назад

I have the same boiler that has a flashing blue light but the green light on the on/off dial is off

@johnklein7127 Год назад

How do you bleed this system to check for any air ? Also I have noticed an air lock in the hot water system, any help would be great.

@PlumbingGy Год назад

Is the airlock from the hot water draw off? (Taps does not have water)

@neillchippett655 Год назад

Does the boiler require a demand as well to fire into max ?

@smburr1 Год назад

Yes

@PlumbingGy Год назад

No, as you can turn into service mode/ chimney mode

@neillchippett655 Год назад

@@PlumbingGy Thank you.

@Winachallenge Год назад

does anyone Know where can i find the pressure lvl on this boiler model

@TheShardd 10 месяцев назад

Did you find out? Been here for hours searching.

@michaelgriffiths5723 9 месяцев назад

@@TheShardddid you have any joy finding the answer?

@TheShardd 9 месяцев назад

⁠@@michaelgriffiths5723None. Someone told me that these boilers are not pressurised. As they run off a tank in your loft. So they work differently.

@michaelgriffiths5723 9 месяцев назад

@@TheShardd I've got to the bottom of mine. I have a separate gauge on my system. It's on the filling loop next to my hot water tank. If that helps you out any?