How to rebuild a Yamaha warrior 350 cylinder and head from start to finish.

Подписаться 2,1 тыс.

Просмотров 26 тыс.

50% 1

In this video we show you how to break down and rebuild a yamaha warrior 350 motor, from the head assembly to the block and piston.
we also upgraded to our 366 forged big bore cylinder kit and port and polished head. please check your owners manual for correct break in procedure after your motor is rebuild. it is fairly easy to rebuild one of these motors. you can do it in the atv but find it easier to pull the motor out in order to do so. valve gaps are also different depending on the type of camshaft you are using. break in oil is also highly recommended.
zoomzoomparts.com/pages/searc...
zoomzoomparts.com/
moxcracing.com/
/ zoomzoomparts
zoom_zoom_p...
YAMAHA WARRIOR 350 BUILD SERIES
• 1998 Yamaha Warrior 35...
YAMAHA WARRIOR HOW TO VIDEOS
• How to video's
TEST AND TUNE DAYS
• Test & Tune Days
CHECK OUT OUR MERCH
zoomzoomparts.com/pages/merch
PRODUCT LINKS
zoomzoomparts.com/collections...
zoomzoomparts.com/collections...
zoomzoomparts.com/collections...
POWERSPORTS INSURANCE
www.powersportsinsure.com/

Опубликовано:

19 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 35

@mxbeanz1206 Год назад

Elevator music needs to go though xD. Tough to hear what you're saying in some parts

@user-ci5pb1iu6b 5 месяцев назад

Just bought a carb off ya ,very pleased with the product ,runs great.the fact that you use the actual jetting for the warrior is awesome 👍

@zoomzoompartsllc 5 месяцев назад

Thank you for your support

@mxbeanz1206 Год назад

Thanks guys. love the content

@evanlance1426 Год назад

For the ring end gaps what should they be?

@conoverkid8221 Год назад

This is the best video I've seen on warrior rebuilds great content!

@zoomzoompartsllc Год назад

thank you so much hopefully others find it helpful as well

@AirOnTheMove Год назад

Great video very informative

@zoomzoompartsllc Год назад

Ty bro

@SethGranger 2 месяца назад

No lock tight?

@Evadingmoto 5 месяцев назад

Does the connection rod wrist pin bushing spin?? Or is it stationary?

@cletusbowling923 7 месяцев назад

You all really need to do a full engine build . Bottom end top end and transmission. Full build. So we cam see both sides of inside the cases and transmission crank and so on. Plus a valve system and cam.

@zoomzoompartsllc 7 месяцев назад

we did do the cam and valve system in this build as for the bottom end we could probably do a small video on it as i have one i am going to be opening.

@berad187 5 месяцев назад

What was the measurements for the valve lash adjustment for Both sides I'm been new installing new rocker and Rocker arm shafts on my 2002 Yamaha warrior 350

@zoomzoompartsllc 5 месяцев назад

if you are using a stock cam i go with 0.08 in and 0.18ex but always check with repair manual

@Kevin-is-here Год назад

Thanks for sharing 👍🏼

@keithnelson7919 Год назад

Why did the valve covers need to come off and can you explain what you were doing at the very of the end of the video with the flat metal tool (I don’t know what it’s called)

@zoomzoompartsllc Год назад

Feeler gages have to set the gap on the valves

@zachwhyte6040 Год назад

Does this kit come with the valves already installed in the head? Or is that the head that y'all took off the engine?

@zoomzoompartsllc Год назад

The head we sell dose not have valves or rockers in it

@michaelpresey2273 11 месяцев назад

What are those 2 allen bolts for bellow the cam cover ? As I'm taking mine apart the one wasn't even tight

@zoomzoompartsllc 11 месяцев назад

Part number 91317-08050-00 they hold your gasket head and block all in line till you get the main head bolts in

@michaelpresey2273 11 месяцев назад

@zoomzoompartsllc thanks for quick reply !

@mxbeanz1206 Год назад

Are you using a oem cylinder head or aftermarket? Was always iffy on the aftermarket heads for the warrior.

@zoomzoompartsllc Год назад

We used are forged kit we have it in all are warriors

@tylerschultz3298 Год назад

What about bottom end? I think my noise is rod bearing

@zoomzoompartsllc Год назад

we did show a open bottom end in one of the videos but had no reason to open this on you can check your crank and rod bearing without taking it apart. if that checks out it could be a counter balancer bearing and that would have to be torn down