How To Remove A BMX 1 Piece Crank, Bearings, and Cups | Step by Step

Подписаться 7 тыс.

Просмотров 91 тыс.

50% 1

This video will show you how I remove a one piece crank, completely. If you are switching over to a 2 piece or 3 piece crank, make sure you get the right size American bottom bracket to fit your spindle size.
If you need to purchase spanner wrenches for the crank, I recommend-
amzn.to/3Jq97Wm
amzn.to/42gINXn
amzn.to/40gA45Y
If you need to purchase an American Bottom Bracket set, I recommend- amzn.to/3mYBVhk
If you are switching to a 3 piece, you will need a bottom bracket like this in your spindle size- (usually 19mm, 22mm, or 24mm)- amzn.to/3bBfWC1
If you want to know more about installing a 3 piece crank, check out these video:
Installing a BMX Bottom Bracket With a Bench Vise- • Installing a BMX Mid B...
Installing a BMX 2-Piece Crank- • Installing BSD Substan...
Installing a BMX 3-Piece Crank- • Removing and Installin...
My next video will be on the complete installation of a 1 piece crank
If you have questions or requests for future videos, comment below or message me at rob@basementbikeshop.com.
The Basement Bike Shop RU-vid Channel - www.youtube.co....
My mission is to keep more bicycle riders in the sport.
Whether you can't afford to take it to a shop,
you don't have a way to transport it to the shop,
you don't have time to take it in for repairs,
or you just want to learn to fix, repair, and upgrade your own bike,
I will help to keep your bike running smooth and you riding longer.

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 74

@alanlhz2118 2 года назад

Man you dont know how much you helped me, ive been searching for how to remove this kind of crank for 2 whole days, THANK YOU

@thebasementbikeshop2336 Год назад

You're Welcome! Glad I could help

@briangurnett 3 месяца назад

Same! You helped me a ton, dude.

@nomoniker7917 5 месяцев назад

Perfectly explained video...thats more rare on RU-vid than you think. THANK YOU!

@DryBowser4523 4 года назад

Thank You So Much! Going To Switch To 3 Piece Cranks With A Smaller Front Cog :)

@mountain5930 3 года назад

Hey, just wondering. I have a 20” frame what 3 peice cranks and BB would you recommend?

@graemepalmer6991 4 года назад

Great video, very helpful. Thanks.

@JR-yr8xm 5 лет назад

thumbs up for showing a gt dyno compe

@boydluapula2156 2 года назад

very good video exactly what I was looking for

@hunterkennedy7915 3 года назад

So helpful i was turning it the other way

@danvanhoose6783 4 месяца назад

My old huffy savannah needs this done for bearing service.thanks

@JohnDoe-nf2ok 5 месяцев назад

Best concise video on the topic.

@fransuke12 Год назад

Question. What size of crank bearing you used?

@TheBBCking Год назад

This video was very helpful and well explained

@gregharper5920 Год назад

Thanks, man. Great instructions!

@byronoreilly2385 Год назад

Thank you lifesaver😂

@thebasementbikeshop2336 Год назад

You're Welcome! Glad I could help

@smetanka1996 3 года назад

Thank you!

@johnnyskuja 5 лет назад

thanks. very clear

@georgemilne5562 Год назад

Grateful for you

@vanrippon6043 2 года назад

Do u have to take out those inner circles with the hammer and metal rod even if u are not changing the crank and just changing the sprocket ?

@joeylamp_holder2013 3 года назад

Are crank sizes universal across all bmxs, for install?

@blvck______ 3 года назад

Nooo all different

@Altie8 5 месяцев назад

thanks

@ZombieJuicer17 5 месяцев назад

I'm trying to find what to do if the cups are stuck? Which is where I find myself... the one thing holding up my restoration.

@roncooke2188 2 года назад

thanks great video interesting

@LawnDad 3 года назад

Great video!

@chum-chum2701 Год назад

Thank you

@peterrathbone179 4 года назад

Great informative video 👍👍

@huntersemple7760 3 года назад

THANK YOU

@justinleekeirulf7483 3 года назад

Very helpful

@Nofear9066 3 месяца назад

? i have a 25 tooth crank one piece can i put a 32 tooth crank on it without replacing bearings can i use the old ones?

@Bdamazyn 2 года назад

Dude! You saved me😁👍

@Trypno 2 месяца назад

I have been wondering how the hell to remove the crank on my electra rat rod since I got it, all I could ever find were talks about square tapers and three piece cranks, and didn’t know I had a bmx style bracket

@lazybear4 3 года назад

Thankyou soo much ❤

@dman4249 4 года назад

Now that I got this out, any 3 piece recommendations that are ACTUALLY in stock?

@zanderbalbin8491 3 месяца назад

1:32 what tools is thos and what size i need help

@barelyworks 2 месяца назад

I got mine off using an adjustable wrench, my question is what is that tool he uses to take that weird bolt off the sprocket...

@diecastgoblin 2 года назад

Why would the bearing hold the sprocket in? It normally falls out if it's a bearing like this one most time.

@TherealGM4NN 3 года назад

What tool too use for that race nut

@lannlann Год назад

It was a 19mm-51mm hook wrench. The smallest wrench. You can see the size on the wrench handle

@brookeowenby8388 3 года назад

Where did you purchase your spanner wrench?

@lannlann Год назад

It was a 19mm-51mm hook wrench. The smallest wrench. You can see the size on the wrench handle

@lannlann Год назад

Search eBay

@crown6468 4 года назад

Can I replace unsealed bearings with sealed ones? I have a one piece crank

@mrdubachery 4 года назад

What if the cups have been in there since the factory in 97? They definitely aren't moving at all for me. Thanks!

@thebasementbikeshop2336 4 года назад

I would spray a little pb blaster in the areas. Let it soak in for a couple hours. Spray it again. Let it soak again. Then Try it. I hope this helps.

@mrdubachery 4 года назад

@@thebasementbikeshop2336 Much appreciated. Is that a 97 VFR? I've got the same bike :)

@fkw.cheetah9429 Год назад

What did you take the jamnut out with

@tylerthebeast Год назад

I want to know too

@AuroraColoradoUSA 4 года назад

You just tap out the cups. That's what I needed to know. Need to install a square-taper bottom bracket adapter.

@thebasementbikeshop2336 4 года назад

Yes sir

@BMXLIFE1988 Год назад

What size is the jam nut?!very irritating how you left that detail out otherwise great video

@thebasementbikeshop2336 Год назад

Sorry about that. This outter jam nut is a 32mm but not all of them are the same size. I hope that helps

@djdlo 3 года назад

Great video. What size c wrench is that?

@lannlann Год назад

It was a 19mm-51mm hook wrench. The smallest wrench. You can see the size on the wrench handle

@tonelar415 Год назад

what size wrench - outer jam nut?

@thebasementbikeshop2336 Год назад

This one is 32mm but not all of them are. Hope that helps

@ll_oppz_ll3411 4 года назад

What can we use if we don’t have the right tools?

@thebasementbikeshop2336 4 года назад

Thinking about this question gives me flashbacks of cutting my knuckles open on the sprocket as i tried to get my crank and sprocket off with a flat head screwdriver and a hammer. I've done it but i don't have good luck without the right spanner wrenches.