Тёмный

How-To Remove A Seized Lawnmower Blade Adapter 

donyboy73
Подписаться 397 тыс.
Просмотров 59 тыс.
50% 1

How-To Remove A Seized Lawnmower Blade Adapter
In this step by step video I show you how to remove a stubborn and seized blade adapter on a lawnmower.
Don’t forget to click the 🔔 to turn on Video Notifications for more money saving videos and tips, featuring all the brands like Stihl, Husky, Husqvarna, Honda, Echo, Kohler, Tecumseh, Dolmar, Makita, Poulan, Ariens, Powermore, Briggs and Stratton, Champion, Murray, John Deere, Craftsman, MTD, AYP, etc.
Help me make videos or buy me a coffee!!
/ donyboy73
Connect with me on these social media spaces (plus that's where I announce contest winners)
Facebook: / donyboy73-the-small-en...
Twitter: / donyboy73
Instagram: / donyboy73
Easy to follow and thorough step by step tutorials do it yourself (DIY) videos to help you with your broken lawn and garden equipment including snowblowers and zero turn mowers.
I do my best to teach you how to easily diagnose problems the fastest, quickest and most efficient way with real repairs beyond just replacing a spark plug. These tips are for both the homeowner and shop owner.
Whether it be a handheld, two stroke, two cycle engine like a chainsaw, weed eater, weed wacker, string trimmer, grass trimmer, line trimmer, hedge trimmer, strimmer, brush cutter, leaf blower, or four stroke, four cycle units like a lawnmower, wood splitter, lawn tractor, zero turn mower, snowblower, pressure washer, generator or a ride on mower that needs parts installed or replaced, I’m your go-to guy.
My favorite brands of spark plugs are NGK and Champion and are the ones I recommend.
I’ve been a small engine mechanic for many decades and also run my own repair shop so my videos are loaded with tips and tricks that I have learned and want to share with you. You will also find many tool and product reviews from top brands on my channel as well.
I have the largest Small Engine Repair Video Library on RU-vid and the entire internet with over 1200 videos, just GOOGLE "DONYBOY73"!
I want "DON THE SMALL ENGINE DOCTOR" on RU-vid to save you time, frustration and most importantly, MONEY with my HOW-TO videos!
Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. DONYBOY73 “The Small Engine Doctor” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. DONYBOY73 “The Small Engine Doctor” recommends safe practices when working with power tools, hand tools, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not DONYBOY73 “The Small Engine Doctor". ave
#donyboy73 #briggsandstratton

Хобби

Опубликовано:

 

27 июл 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 109   
@Gordon_L
@Gordon_L Год назад
It's often helpful to hit the hex end of the puller screw thread when tight , a few sharp raps then see if you can get another half turn , rinse and repeat , useful if no heat source handy . Also oxy / propane is a cheaper alternative to oxy acetylene , good for heating and cutting steel , not good for silver solder or brazing .
@canoetipper019
@canoetipper019 Год назад
Hi Donyboy, That looks like a Uniweld cutting attachment (I was a welding equipment repair tech in another life time...lol) A tip I picked up when I started out as a Heavy Equipment Repair Tech (fancy title for diesel mechanic I guess): A welder suggested putting a water soaked shop towel around the shaft before welding on or heating bearings etc. The water will evapotate from the towel but it will also keep the heat away from your seals. Just thought I would share with you whatwas shared with me. Cheers from NB
@donyboy73
@donyboy73 Год назад
thanks for the tip!
@AtomicFallout757
@AtomicFallout757 Год назад
8:40 Tip #2: Use anti-seize when reinstalling the blade adapter. It will save you, or someone else a lot of time and effort in the future! Great video Don!
@donyboy73
@donyboy73 Год назад
yes absolutely!
@shabadoo24
@shabadoo24 Год назад
Give the end of the crank shaft a rub with fine sandpaper, same with the inside of the adapter
@wildbill23c
@wildbill23c Год назад
That's a great idea, if you do it right after you unbox the mower...99% of these adapters are never taken off the engine for the life of the mower unfortunately.
@stevewilliams6667
@stevewilliams6667 Год назад
As a small engine mechanic of 35 years,see this all the time.Recently had a stubborn adapter I eventually cut a v in it with cutting disk and split it with chisel.Yes tried heat and have all the pullers.Another tip be careful grass can ignite on underside of deck and check gas did not leak out before ignite torches as fumes can ignite.I used an old pair of flame retardent coveralls and wrap around carb and engine if working around torches or welding blanket will do the same.Always have fire extinguisher nearby also.Great tips Donny.
@7eis
@7eis Год назад
If the puller keeps sliding off the bolt, you can slide a piece of pipe over to keep them from slipping off
@donyboy73
@donyboy73 Год назад
good tip, thanks!
@robbflynn4325
@robbflynn4325 16 дней назад
Thanks. The harmonic puller method worked. Used my impact wrench on it. Ended up bending the frame of the puller but it was a cheapo one I had lying around. Will try and straighten it up.
@carlmiller1034
@carlmiller1034 Год назад
Great video Don! The right tools make the job so much easier!. The "Heat" wrench can be a huge time saver. Thanks for showing both puller techniques as well. Have a great upcoming weekend!
@JeffinTD
@JeffinTD Год назад
Nice video. I’ve found an air hammer can sometimes work wonders in situations like this.
@barrypettit3668
@barrypettit3668 Год назад
Good video Don, Hard to believe someone would let their deck rot out. Keep the videoes coming
@josephrich6014
@josephrich6014 Год назад
Good video on how to use pullers and if needed heat. I usually rap the puller bolt a few times to shock the shaft.
@howardnutt771
@howardnutt771 8 месяцев назад
Thanks for post Donyboy .. only guy adventurous and caring to post seizure. Thanks from Aussi the land down under 😅
@byronwoolfrey1039
@byronwoolfrey1039 Год назад
Excellent video, nice to see it's not just i who runs into that kind if trouble, 😆 ONLY thing was when I used the heat it caught the dry grass on fire 🔥 . Good to keep a bucket if water handy. Isn't it gut wrenching to see such a nice mower gone to pieces just because of lack of a little care. I had one in exactly the same condition last month. No need of it, my push mower is 20 yrs old and the deck is as good as new. Have a good wknd
@deanmoore420
@deanmoore420 Год назад
Hey That’s one of the first investment I ever did bought torches in a good welder
@rameshpersaud7131
@rameshpersaud7131 Год назад
Thanks again for thinking about us
@999thenewman
@999thenewman Год назад
Nicely done. Now you have two good used engines.
@ashleybruton7076
@ashleybruton7076 11 месяцев назад
Best video thankyou very helpful
@robertmailhos8159
@robertmailhos8159 Год назад
Just food for thought you could also wrap a soaking wet rag around the engine out put shaft to keep the oil seal from getting hot while you use heat up the blade adapter
@tinytreepublishing8383
@tinytreepublishing8383 Год назад
That sounds like an excellent idea. Cheap and effective!
@robertmailhos8159
@robertmailhos8159 Год назад
@@tinytreepublishing8383 yeah buddy 😎👍
@jimmyhuffman6802
@jimmyhuffman6802 Год назад
Another reason not to store your lawn equipment outside in the weather.
@franklaskus2395
@franklaskus2395 Год назад
Did it all the time doing plumbing and hvac
@jimmyhuffman6802
@jimmyhuffman6802 Год назад
@@franklaskus2395 you want to talk about doing time.
@timweb1510
@timweb1510 Год назад
Keep em coming
@petelugo2681
@petelugo2681 8 месяцев назад
Outstanding video! Thanks.
@donyboy73
@donyboy73 8 месяцев назад
Glad you liked it!
@dontupdateifitworks.424
@dontupdateifitworks.424 Год назад
GOOD VIDEO & KNOWLEDGE! 😀
@akdouglas6633
@akdouglas6633 Год назад
Impact really helps
@kenhilson786
@kenhilson786 Год назад
I have used the knife type bearing pullers on them. I use bolt that threads into pto but put wrench on it so it doesn't turn with puller.
@liljoeii6091
@liljoeii6091 Год назад
Thanks you for video
@stevesmith6058
@stevesmith6058 Год назад
That was real nice how you took that off you got some real good channels I like them all keep them coming Donnie
@metoon3092
@metoon3092 Год назад
Good video sir, always helpful info. Honda mowers, - _not a fan_ .
@paulmorrey733
@paulmorrey733 Год назад
Thanks Don
@lilo2469
@lilo2469 Год назад
Opinions, imo your skills are of value and the mark of a true Professional, NOTE will send bigger hat if needed 🤣
@woodenbeast9337
@woodenbeast9337 Год назад
Very helpful
@billlovett4256
@billlovett4256 Год назад
Nice video, hello from Ottawa. Bill
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I just had a similar rusted out deck, Mapp gas worked for me getting the adapter off, but I broke all three bolts holding the engine to the deck, despite lots of penetrating oil and heating the bolt heads. 😥 Today I try welding nuts to the broken studs. 😎 I've been eyeing an oxy torch to buy, this video might have pushed me over the edge. Thanks for the video.
@donyboy73
@donyboy73 Год назад
it's a necessary evil in the shop!
@mscir
@mscir Год назад
Well done.
@dontupdateifitworks.424
@dontupdateifitworks.424 Год назад
Thanks!😉
@cribbage1686
@cribbage1686 Год назад
Good video.
@harrygrimley4352
@harrygrimley4352 Год назад
Yep. Nice job
@vvegas9221
@vvegas9221 Год назад
I used to use 2 torches in mechanical room air handlers to remove large blower wheels. get that hub cherry red. start spinning by hand & off it comes every time !
@joebaucom4537
@joebaucom4537 Год назад
Great !
@mrfood34
@mrfood34 11 дней назад
Are blade holders a standard size can you use them from other makes like honda and brings?
@chucklantz4956
@chucklantz4956 Год назад
unrelated question. How much clutch drum end play should one expect? I've kept a 32cc craftsman whacker alive for 10 years (on acreage) and just replaced clutch assy & drum. When the drum center screw is tightened I still find just under 1/4" of back and forth play. Is this normal? thanks Donny!
@dfields9511
@dfields9511 Год назад
Could you use a propane torch? If you don’t have access to the others ?
@brendan5846
@brendan5846 Год назад
I’ve got a ms260 that’s leaking a ton of bar oil under the clutch cover. Any ideas what it could be?
@vetterfellow
@vetterfellow Год назад
I own oxy/acetylene tanks and gages, haven't used them in about 20 years. I know the tanks have to be exchanged. I use propane gas or it's hotter Cousain map gas whichever is closes to me. Thank you for a wonderful how-to video, God Bless !!!.
@j83460
@j83460 9 месяцев назад
Seems like they stopped making Mapp gas
@thephreak2151
@thephreak2151 Год назад
Is it possible to weld the shaft? My blade adapter broke and took a chunk out by where the key from the blade adapter goes.
@charlievanor
@charlievanor Год назад
Liked your video. Always professional. But I watch folks using pullers using a bolt, and it is so much better to use an allen bolt with a pointed puller. Just saying
@jeremiahmnjohnson
@jeremiahmnjohnson Месяц назад
Your a g dam genius
@TheWaterman1000
@TheWaterman1000 Год назад
Just removed a broken bolt out of the shaft. Would be interested in seeing how you would do it.
@37yearsofanythingisenough39
If ever there was a place on a small engine for the application of antisieze it is the pto end of the crankshaft.
@jameshedrick605
@jameshedrick605 Год назад
I've come across some that i had to use a cut off grinder on
@lovestihlquality1369
@lovestihlquality1369 Год назад
Where can I find the the fireproof sneakers?😃 Great video as always..
@donxiong1775
@donxiong1775 9 месяцев назад
Wait a min🤔Do the threads on the adapter go all the way through where the bolt holds the blade? If so I mean I'd just get a really long bolt with the same thread pitch and call it a day
@themowerman
@themowerman Год назад
I use map gas.. works well too.. did you try it because I see you had some in the background
@donyboy73
@donyboy73 Год назад
yes but wasn't hot enough for these!
@jesterr7133
@jesterr7133 Год назад
If we do not have a torch, what are some other methods we can use to break them loose?
@michaelspencer301
@michaelspencer301 Год назад
Excellent job ! We call them Smoke Wrenches! Lol
@mikespain8655
@mikespain8655 Год назад
Just broke a pulley on self-propelled mower I am doing an engine swap on. Using a 2 jaw pulley. I need some torches or MAPP gas at minimum. Propane doesn't get hot enough.
@slpip4365
@slpip4365 10 месяцев назад
I would use a pull hammer for car bodywork to take off the adapter.
@raymondmazza2338
@raymondmazza2338 Год назад
You want a clean deck as well. Residual grass and weeds can ignite when using a heat source. Not everyone thinks of everything before diving into a job
@stoolie10
@stoolie10 Год назад
Good morning Don, I’ve dealt with a few of those stubborn blade adapter removals, can be challenging at times but helps to have the right tools. Any tips for removing engine mounting bolts to the deck. I often can’t get the bolts loose and they want to break easily. Not fun extracting broken bolts from the engine.
@donyboy73
@donyboy73 Год назад
sometimes I heat the part on the engine where bolts g through but be careful because it can melt if using oxy-ace torches!
@tedbrewer7847
@tedbrewer7847 Год назад
Wouldn’t heating it that much damage the crank seal?
@mr1pearl
@mr1pearl Год назад
🥓🥓 saved cool !
@nickigilbert7295
@nickigilbert7295 Год назад
I'm on my daughter's RU-vid account. To help keep the puller from walking off the head of the bolt I just put a hose clamp on the end of the puller or the head of the bolt, which ever is bigger. Just make sure part of the hose clamp acts as a lip so the head of the bolt can't go past the hose clamp lip. Or so the puller can't walk past the hose clamp lip.
@shannongrim7212
@shannongrim7212 Год назад
Looking for ms290 complete motor how much?
@jeffreybaker7406
@jeffreybaker7406 Год назад
Donny, I’m in a bit of a pickle. I’m fixing a 2005 Craftsman 55cc Incredi-pull chainsaw 316350840 for a buddy. The oil pump 9228-310208 worm gear is stripped and the housing is cracked at the set screw. I can’t find it anywhere because it’s been discontinued. I’d hate to junk a perfectly running saw over this. Any advice would be helpful. Thanks!
@DaddyBeanDaddyBean
@DaddyBeanDaddyBean Год назад
I wipe a light little film of axle grease on the shaft and all the contact surfaces between the adapter, blade, and bolt.
@Ron-ds2ob
@Ron-ds2ob Год назад
Before I would resort to the torch, I would have given the center bolt of the puller a few moderate hits with a hammer to try and pop it off. Or I would hit it with an impact, which usually pops them off. I don't like fire, dead grass, and the crank seal so close together.
@georgenesbeth8742
@georgenesbeth8742 Месяц назад
Donyboy I have a craftsman push lawnmower I lost my manual and having a very hard time getting a replacement blade adopter every where I go the adopter is too small my mower is 6 years old
@bitchybecca575
@bitchybecca575 2 месяца назад
I c your puller has a flat surface does that part screw onto the bolt or is it all one piece and if I had to replace the bolt for whatever reason how would you do so with a flat end
@bitchybecca575
@bitchybecca575 2 месяца назад
I am working on a project but I have a three jaw puller and it has a screw type thing on the end I have a double pulley on my engine
@xmanb8193
@xmanb8193 Год назад
👍
@justincase2281
@justincase2281 Год назад
It saves your bacon, and you could cook some bacon with it too. I like bacon.😄 Seriously, I'd like to see a video on how you would put a new adapter ON the crankshaft, especially if it's a tight fit and doesn't want to go on with a few light taps. I've put a few onto various mowers by replacing the keys and greasing up the end of shaft if the adapter was stubborn. Then I've had a couple that just didn't want to go on without a few good whacks, but then you run the risk of screwing up the end bearings and seals. Didn't have a torch, but luckily everything went together okay, but it would be interesting to see how YOU would do it. Anyway good vid and much appreciated. 👍
@donyboy73
@donyboy73 Год назад
i would sand the shaft or use a flap disc on a grinder
@justincase2281
@justincase2281 Год назад
@@donyboy73 Hey Dony. Thanks for personally replying. I'll keep your suggestion in mind if I have a problem putting an adapter on a shaft. Nice of you to take the time. Appreciated.👍
@Pete.Ty1
@Pete.Ty1 Год назад
👍👍👍
@mobileterminaluzer1858
@mobileterminaluzer1858 Год назад
I prefer safety squints.
@wayneessar7489
@wayneessar7489 Год назад
Not for the HRX217 I guess?
@rumbletumblestumble
@rumbletumblestumble 2 месяца назад
what about that main seal on the motor ?
@rumbletumblestumble
@rumbletumblestumble 2 месяца назад
oh, idk man.
@rondavis191
@rondavis191 Год назад
i like these videos lots better than daves. just sayin
@Holmesy89
@Holmesy89 5 месяцев назад
Thanks mate. Will be trying the Map gas torch tomorrow. Swapping a newer Briggs onto an older good quality deck (Masport) but the blade adaptor is different (donor is a different brand)
@charlesoverton
@charlesoverton Год назад
That is not map gas. I recognize that cut off tip.
@PatHiggins-Mayo
@PatHiggins-Mayo Год назад
Aw Dony, you ruined the body of the mower with your boot.. Surely good enough for 2 more seasons, hehehe 😉
@carlsmallmotors1114
@carlsmallmotors1114 Год назад
How much are those torches
@37yearsofanythingisenough39
Go to a welding supply store such as Airgas and check into what is commonly called a “plumbers pack” if all you intend to do is occasionally heat something up. They are small light weight tanks in a carrier you can hand carry anywhere. Before the introduction of PEX tubing for water lines plumbers used them for sweating copper tubing together in a house. The two tanks are for oxygen and acetylene same as shown. Some supply houses are only refilling their own tanks now, so be careful where you buy them.
@donyboy73
@donyboy73 Год назад
without tanks, $350 canadian
@Anto-kz5hk
@Anto-kz5hk 8 месяцев назад
Barrido
@dontupdateifitworks.424
@dontupdateifitworks.424 Год назад
PENETRATING OIL( LIQUID WRENCH) & REMOVE EVEY SHARPENING & ADD A SAFTEY WIRE/ PIN & LUBE - FOREVER 😀😘 OR - FILL THE GAS TANK & YOU'LL NEVER HAVE TO DO IT AGAIN?🤫😭
@charlesoverton
@charlesoverton Год назад
That seal is over heated.
@fredsanford336
@fredsanford336 8 месяцев назад
I'm poor so I had to use a Bic lighter, It took forever:(
@charlesoverton
@charlesoverton Год назад
You are using the cutting torch. Watch out. Don't you have a no. 2 tip.
@rgamore
@rgamore Год назад
Too much heat, you ruined the crankshaft seal on the engine. Use less heat and tap the head of the puller bolt with a hammer, might have to do this a couple times. If your not saving the engine, then burn away!!!!!!
@100vg
@100vg Год назад
Sorry, but I don't think an oxygen and acetylene torch will be any good for *my* bacon. 😟 I like mine crispy, not blackened and carbonized crumbled to ash. 😁 🤣😂🤣😂🤣
@donyboy73
@donyboy73 Год назад
lol, I use a microwave!
@raymondmazza2338
@raymondmazza2338 Год назад
I’ve had good luck using “Freeze Off” in many instances
Далее
TOP 3 Reasons Why Your Lawnmower Vibrates!
6:15
Просмотров 54 тыс.
I SIMULATED THIS EURO 2024 GAME.. 🤯
00:13
Просмотров 1,7 млн
Едим ЕДУ на ЗАПРАВКАХ 24 Часа !
28:51
Engine Teardown - Another One Bites The Dust!
17:54
Просмотров 41 тыс.
How to Remove a Lawnmower Flywheel
10:16
Просмотров 96 тыс.
Remove a Rusted on Blade Adapter from a Lawn Mower
7:26
A Mower Blade Adaptor Is Rusted On
27:20
Просмотров 9 тыс.
Don't sharpen your lawn mower blades! Do this instead!
11:17
How To Replace A Lawnmower Blade Adapter
19:17
Просмотров 14 тыс.
3D printed Hairy Lion
0:45
Просмотров 38 млн
Which water gun won??
0:30
Просмотров 64 млн
Pulling Hinges with A Halligan
0:26
Просмотров 24 млн