This video is a how to on burning a stump with a quick and efficient method. The key is a steady heat applied as low on a stump as you can get it. We achieved this by cutting into it with a chainsaw.
Omgosh," I literally was thinking the same exact 2 things you were too, as far as carving a perfect chair if he would of left more of it but I would of made a higher chair and those roots are perfect to prevent soil erosion, you dont need chunks of concrete or what not to prevent soil erosion... Right on buddy, you are a clever person...
Nice video. I remember my dad using an axe making the curtain an X shape and pouring gas on the stump in our back yard about 40 yrs ago. It was summer time I got to stay up late til 3-4 am on fire watch w/my cousin. We thought that was so great.pitched a tent in case we wanted to sleep. He hid the gas csn somewhere cause we were fire bugs as teenagers 12-13 yrs old. That stump was so huge and tree was so old it was hollow in places dad said as him n a buddy cut it down. Our stump was 5x larger than the one in video. Thunderstorm broke half of it down so dad finished it off. We used sticks as well to keep fire going all night. We fell asleep in lounge chairs after 4am. Dad took over at 5am and it burnt about 6-8 inches below ground level. He got to use more gas tho. We woke up at 3pm. We were kids it was summer break. We felt like we lost a summer day. Lol. I enjoyed your video very much my friend. Similarities from 40 yrs ago.
20 years later... "well, we've made some progress, and it's really starting to diminish the stump. The psych ward has allowed me to come back and record over the past 19 years, though I can't seem to get that music out of my head even though they've upped my medication."
The key word is desile fule..use some use alot!!!!! Not 3 drops...let stump soak in fule for atleast 2weeks..soaking it with fule everyday.then george foreman time...after a goooood long soak...set it and forget it..great method if its done rite..takes time and fule
In Australia we do it like this: First cut the bottom and top out of an oil drum. Place over the stump leaving an air gap at the bottom using some timber or brick chocks and put your charcoal or wood inside. Pour in a bit of sump oil and light. When the fire is really hot place a sheet of galvanized roofing iron on top. The fire will soon go out but will continue to smolder as the drum creates a draft and contains and focuses the heat even if it starts to rain. Course it tends to make a heck of a lotta smoke but that keeps the mossies and blowies away as well as the Mrs if she starts wingin' 'bout the effect on the washing. After15 hours or so the stump and all the roots will burn out without having to relight it several times. No worries. Fair Dinkum mate.
I wouldn't advise 99% of people to light a candle lol, I grew up on a farm I know people in there 50s and 60s that don't know the stove top lifts up smh
In the beginning of your video, when you're using your chainsaw to cut the plus symbol into the stump, you can see that the chainsaw is throwing a lot of fine sawdust. That's always your best indicator that your chain needs sharpening. When your chainsaw is sharp it will throw big chips if wood, but never sawdust. Good luck. I enjoyed your video.
The cuts you made demonstrate a fire-making technique known as the Swedish Torch/Candle. If you make the cuts wider, you can build the fire inside the stump without using diesel fuel. I wouldn't suggest to anyone that they go to bed and leave this burning in a strong wind. I burned a stump once and the fire spread through the dead roots, igniting leaves far from where I'd cleared.
Or he could just use an auger and make a rocket stove. I don't know where he got the idea that sawdust won't burn. Maybe if it was extremely wet from a fresh cut. But it dries out pretty quick in the open air.
@@captainfragger6295 Apparently you have never been around a saw mill that burns it's own sawdust. It might smolder for weeks but only the surface will burn.
@@edofstad9675 apparently you don't understand quantity. You're talking about a place with piles of it everywhere. Piles that can spontaneously combust. I'm talking about somebody cutting into a log to make a swedish torch or a jet stove and then worrying about every little bit of sawdust inside the hole. Apparently you've never seen a RU-vid video or a video on Instagram where someone takes a hand auger and drills the holes and then puts some of the sawdust back in it and sits it on fire with a few sticks. And in this video this guy is burning more sticks than he is wood. The whole purpose is to burn the stump. Not burn a bunch of sticks on it. And if you have a chainsaw you can cut more Cuts than just an X. You can cut a double x. The more airflow the better. And as I stated if it's a fresh cut on a living tree the sawdust will be damned but if it is been dead and it's a dead standing tree that shouldn't be a problem. Not to the point of trying to blow a bunch of air in there before the fire is started
@@edofstad9675 and by the way I have been at and worked at sawmills. I have been to places where sawdust is all over the place even outside blowing like snow every day of the year. I've been in paper mills, I've been around coal. I have been a lot of places and done a lot of things. I've seen flower ignite like an explosion when you had enough of it in the air. I seen bales of hay burst into Flame without anybody setting them on fire. I've even looked down into a volcano. Don't assume you have more life experience than the next guy. I've even been in refineries that were so old they were originally made to produce kerosene and they would pour out gasoline to evaporate in the dirt. I've been to Refinery so old they had valves with swastikos still on them. I've been inside a boilers, heaters, cooling towers, Heat exchangers, processed Towers, even a smokestack. I've been in caves and mines, I have hauled hay, even drove a semi for a while. Been on an oil drilling platform, even a windmill. But if you want to compare a pile of Sawdust to less than a handful then okay.
@@captainfragger6295 Whats wrong buck wheat?? Keep trying to justify yourself. You talk to hear your empty head echo. Learn how to do it the right way, Someone just might have RU-vid video you could learn from 🤣😂🤣😂🤣😂🤣😂
I used your stump burning method last weekend. Burned two 20" dia pine tree stumps. Method worked great. There was a slight fall breeze for couple days. Thanks for posting this. God bless.
Got the idea from your video! Started a fire it worked great! Didnt put any fuel on it just burned it. It burned then soldered for 4 days and it went 1 foot below the ground. Kept near it with hose just in case. This was at least a 3 foot wide all around and 1.5 foot high stump. Cheap and affordable project. To rent a stump grinder is $150 at home depot didn't want to spend that. So I saved myself money! Thank you!
I don't know if you will read this, but the easiest way I found to burn a stump out was Charcoal Briquettes. What I did was built a ring of bricks around the stump just slightly higher than the top of the stump, then dumped the already coals on top the stump and in a matter of hours it was burned down to the ground level. I added more Briquettes but I don't know that I really had to. I think the ring of bricks concentrated the heat. In the morning there were little steam fissures all over the yard where the roots were burning.
My uncle Sonny used the exact same method on his farm to get rid of medium sized stomps back in the 50's when I was a kid. He did one additional thing after the stump was burning on its own. He would take a 55 gallon barrel punch a couple of holes into it then turn it over onto the stump. It allowed the stump to continue burning but slowed down the wind and contained the heat so there was no stump left in the morning.
This is brilliant. Burnt first stump (of ~100..) tonight using this method, and it worked out brilliantly. Blown away by the simplicity. We've tried every other technique (drilling, saltpeter, etc...) and this is by far the simplest and most cost effective. I could have cried when the stump was burning with next to no effort. You're my hero.
Slightly simpler method needs 2 cuts (seeing you have so many Stumps): 1 Push down into the center as deep as possible, just a slit straight down. 2 Cut or Drill from the groundline (even better, dig a few spades and go as deep as the stump) sideways into the main "chimney" You get a | L| kind of Shape, Chimney and Air intake. Prime the chimney, wait, done. Gets more even if you have 4 Air-intakes Radially.
Doesn't it make you feel sorry for the guys that throw away money by wearing out expensive machines, just to save fire from doing it for free, over a period of time that subtracts nothing from you? Got a rush job? Sure blow the bucks for the good of the project, but over-kill underscores under-think. If they'd do a careful appraisal, they'd find that they haven't caused one extra hair to grow on their little chests.
Why not sit on the stump and fish all day and the next day and next year. And when you get tired of sitting on the stump, sit on the ground and lean against the stump and fish all day.
I can remember as a child watching my relatives get rid of stumps. They would dig about 2-3 feet down beside the stump (allow for a plow) and then put hot coals around the stump. Worked really well. Takes about one night to complete the burn. Disadvantage - hard work digging the hole. Then fill the hole up with dirt.
Forget all the critics - cheaply and effectively. You removed your stump without having to buy anything or rummage for a drum. In the meantime, toasting grilled cheese on that fire at night with a bottle of Jack sounds like a great way to spend a late evening. Personally, looking at that property, I'm likely to have left the stump as a "utility table" when you sit on the bank, or tie a line to it for the boat or something. ALSO, for critics, this video also served as a discussion of other methods of removing a stump, so don't be harsh. This was a good, honest video.
My grandpa used to drill a hole in the center, put a stick dynamite in it to blow stumps to smitherines🤪 or put a speaker next to stump and play your background music to destroy stump😵
Cayden McGraw what does 98iii mean. I even googled it! No luck...at least nothing that made sense or applied to this. So go ahead and increase my vocabulary please and thank you. 😊 Mike
Wow, so many negative comments on this video. I didn't think it was that bad! If I want professional level TV I will watch BBC. Thank you for your hard work making this and sharing it. :)
You got a sizeable property with stumps? I mean acres of property and 20 stumps? Rent a backhoe for a day with a narrow digging bucket. Dig them up out of the ground with deep digs on four sides of the stump. Takes 15 minutes or so per stump. 20 minutes for a big ol' stump (30+ inches diameter). The stumps come up with most of the roots, too. Throw all the stumps in a burn pile and you are done in one day. Your property looks fantastic, and your job is done.
Thank you, I have never had to do away with a stump. I live in the city and I won't pay to much for anything as I stretch what little money there is in retirement. Thank you again, as I am old. in order to survive, I must be smart and do the best I can. God bless you!
Mikep The kangaroo I did also. Due to the virus it took ‘em a month to deliver it. While I was waiting for amazon to deliver the stump some druggie stole the old one.
These ' How To Do Recordings ' are always helpful in finding the resolution to the on-going problem and or project to be done. Before these ' How To Do ' instructional videos... it was just a learning process for the so many in trying to find the easiest way to get it done without involving high costs or major machinery to get the job done. Nice ways for all of us out here when it is time to get the job done. Scott Lanson
First of all, make sure the chainsaw blade is very sharp (yours obviously wasn't). After cutting the cross, measure the depth of the cut in the centre, and mark the chainsaw blade about two inches longer than this measurement. Now point the chainsaw straight down and cut straight down with the tip of the chainsaw until the mark on the blade is level with the top of the stump. You should leave the sawdust in there as this will soak up some of the diesel and will help the fire burn in the bottom of the stump. After the first soaking with diesel oil and standing for a day or two, put about the same amount on again and let that soak for a day. Now add a bit of gasoline to light the fire. The sawdust will burn and will make sure the stump is burning in the bottom as well as the top. It will burn down much faster that way. We did ours this way and it was pretty fast.
Hey Ali B Mr. Knowitall, :P Please let this man have his pet stump?! At least appreciate how creative the TLC is he put in to it (a (former) arrow aluminum shaft to do blow jobs)(lovingly massage Diesel in), other than simply using a tractor (he mentions a plough so he must have) to pull it out. Even with the blunt chainsaw, just fecking sawing it off, (after digging a foot deep around) would have been much less work than even the cross cutting ordeal to begin with :) I have seen far more interesting videos with way less views than 7,5 Mil, must be the music? Right? Time for my meds
First of all He probably, like myself, figured no sense in sharpening when he'll be cutting against the grain and will likely hit dirt which will destroy the blade sharp or kinda sharp and it's called a plunge cut when you cut from the saw bar point straight into it. Try not to be a Dick next time. Try "Hey you know what else works good" or " You know what I've founds seems to work better". Anything but "Hey I'm a jerkoff"-slang for "First of all"
Glad I wasn't the only one that saw just how terrible that saw performed. If my saw isn't chucking curled chips I'm pulling out the file. ESPECIALLY if I'm going to put it on the internet.
Great video! Much better method than drilling holes. I tried this on a 26” pine stump, other than having it grinder, which would have cost me 600 smackers. I’m burning it now while I’m writing this and it is working great. Blowing out with metal straw. Keep em coming!
Nice work. I have seen it done different way but other then using a chainsaw I will try it. Although I do have a stump that rotten out in the middle so that one should be pretty easy. Thank you for sharing
Thank you for the time making this video. When equipment isn’t available this method is brilliant!! Cost efficient too. Sure gets the job done. Thx again. 👍🏻👍🏻👍🏻
Ingenius! You know...almost every video I've seen that bad-mouths stump burning inevitably shows some guy who doesn't know how to create a good campfire. Your method creates a draft and chimney effect from multiple directions...which is smarter than just drilling some holes at the base of the stump. You also create 4 smaller quadrants, instead of one big cylindrical chunk. Most of all, you make the point that it requires a slow, steady burn for an extended period. Very helpful video. Thanks!
Thanks for you video!! You helped me. Also try this!! Same concept as a bellows on a forge one you get the fire going, stand and 10-12 ft away with a leaf blower and you can really speed things up.
Of all the methods I viewed on "Fool Tube", this one seemed to make the most sense, so I tried it, with the exception of using more sticks for fuel than what was presented. I got things started with a little diesel and let it smolder for a couple days. It was cheap, effective and trouble-free.
My experience, (for 60 years, I'm 78), exactly! On occasion, in the dark, I've seen red glow some feet down. The magic is the super heated surrounding earth that will maintain burning conditions between small drafts of air fighting down to replace the rising burned gasses. That is unavoidable, the conditions cannot create a vacuum and heat WILL ALWAYS rise. This will only occur in wood that leaves little to no residual ash when burned completely. Most hardwoods will generate a smothering ash, limiting the depth of burn.
Seems to me you could have saved a lot of time accomplished the same by cutting the stumps off flush at ground level with your chainsaw... just saying!
@@c.r.hoodheritagefarms8825 Where that stump is located I suppose that would be acceptable but on a lawn or more used area using a chainsaw will still leave a lot of stump above ground level. You cannot cut flush with the ground, beleive me I've tried. So this is a good technique as t leaves the stump residue actuallly below ground level, and as he says the stump itself is the fuel and the shelter for the strong burn necessary.
Hell yea. Great idea. It was right on the lake wasn't it. Sounded as though it was in his way of mowing who the hell mow's that close to the water. That was an excellent idea though.
I added 10 pieces of charcoal and some accelerant, topped it off with a steel can with holes and in 2 days it smoldered to 6 inches beneath the ground. A1 video...
@@The1nonlyjesicraker I wish most women thought like you do in this regard but they seem to seriously lack self accountability us men aren't as difficult to figure out we're just plain A holes sometimes If a woman can deal with us she's also golden.
In many areas this can cause a forest fire so keep an eye on the process at all times, if there is a large root system the fire can pop up in other areas.
Yup. There is a fire thats been burning up north (alaska) for a little over 40 years. Its burning under ground, roots are the fuel. It dampers down in winter and smolders back to life in the spring. Up in the tundra.
@@zedwpd @13:50 ish in the video he said we will leave it for the night. Then comes back at about (@12:40ish) 7:30 at night and said this is the last check when he is filming clearly in the dark…soooo he himself says so.@ 17:05 “well here we are in the morning” Where you there. Do you have any info he had a fire watch later in the night? It’s not discussed in the video so… Either his communication skills are lacking or he did exactly what he said he did. What evidence do you have to prove otherwise?
I agree and this point applies for just about every video posted anywhere about anything. It is super annoying and in most cases doesn't really help convey the point or cultivate interest. Just like you said, you went elsewhere.
I had an old tree stump that was starting to rot and get ants in it. I poured gas on the center and let it soak and slowly sink into the wood. I did this several times so the stump soaked in the gas. Then, in the evening, I lit the stump and let it continue to burn all night. Checked on it several times during the night cause I live in town. I continued to let it burn. It burned into the ground to the roots! Finally went out on it's own. I probably saved several hundred dollars by doing it this way! From Texas.
