How to remove a Woodturning TENON + Hot Pen Signing & How to Finish the Bottom of Wood Bowls.

Подписаться 5 тыс.

Просмотров 16 тыс.

50% 1

I want to show you how to quickly and effectively remove the tenon from your woodturning bowls, vases, and other projects you might tackle. I have used this method until recently when I purchased a vacuum chuck for my lathe. I really hope this helps both beginner woodturners and seasoned turners who might discover something new. In my tools and gear section, you'll discover links I use often to enhance my craft, and I hope they prove helpful to you as well
🍿 WATCH NEXT:
- 4 ways to MOUNT bowls to the lathe. Wish I knew before I started: • 4 BEST ways Profession...
- Balance Live edge bowls: • WANT eye pleasing Live...
- A useful tool to help with woodturning design: • BEST Beginner Woodturn...
- WET sand with Danish oil and get that professional look: • Woodturning & WET SAND...
- My woodturning PROCESS, layout of my systems for success: • Video
- BALANCE Live edge bowls: • WANT eye pleasing Live...
📝 MY FAVOURITE TOOLS & GEAR
📼The Glenn Lucas video catalogue to elevate your woodturning skills to the next level. My Friday night movies: www.glennlucaswoodturning.com...
🪓Woodcut tools, bowls, gouges and tools:
www.woodcut-tools.com/store/c...
🪒Glenn Lucas Sharpening chart to replicate the profiles he uses for all your turning tools:
www.glennlucaswoodturning.com...
📖Woodturning Projects: A Workshop Guide to Shapes Paperback
The best book I can find for all different projects and ideas, including the measurements required to complete the projects. This lives on my bedside table.
amzn.to/3sEvxOR
🛡️Honeywell face shield bionic with a clear visor.
The face shield I wear in my videos.
amzn.to/3YVzFGq
🛡️Honeywell replacement visor bionic clear.
amzn.to/3QXiKkX
✋Hands Intensive Hand Cream. Protects your hands from cracking and falling apart after you've been at the lathe all day. I apply it after showering.
amzn.to/3OXLKGv
📏Woodturning Double-Ended Bowl Calipers. The same ones I use in my videos.
amzn.to/45xaIDB
🛠️Turn your slow-speed grinder into a sharpening station:
amzn.to/47SJskI
🪒Tormek Sharpening jig that goes on the sharpening station I use.
amzn.to/45QSe0J
📐This tool has all the required sharpening settings and protrusions required and sets the distance of the sharpening jig from the wheel.
amzn.to/45NBhnZ
WHO AM I? 👨
Have we not crossed paths previously? Greetings! 🌲 I'm Kerry, a Woodturner, Veteran, and Registered Nurse. I'm here to share everything I'm learning to assist you on your woodturning journey.
MY OTHER SOCIALS:
📸 Instagram - / kerry_corney
🌍 Website - www.kerrycorney.com/
☕️ Support the channel? You can support the channel - www.buymeacoffee.com/kwcorneyc
PS: Some of the links in this description are affiliate links that I get a kickback from. Thank you.
DISCLAIMER :
My videos are for entertainment and documentation purposes only.
My methods may not be the safest, so please be responsible for your safety and follow the manufacturer's guidelines and all safety instructions.
Thank you,
Kerry C.

Опубликовано:

26 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@AllenOxendine 10 месяцев назад

Thanks for sharing, I’m a beginner turner. I have the hardest time using tenons, my work keeps popping off. Full view and Like 👍

@KerryCorney 10 месяцев назад

You're welcome, Allen! When you mention "popping off," are you referring to the tenon snapping, or does it pop out of the chuck? Thanks a lot for your comment. I'm really pleased I could assist you. 🙏also are you on Instagram?

@AllenOxendine 10 месяцев назад

@@KerryCorney jumping off my chuck. I think I’m too aggressive and should slow down. My last piece jumped off three times before making a mortise

@KerryCorney 10 месяцев назад

Without having seen your turning, my suggestion would be to direct your cuts towards the headstock while turning and focus on taking smaller cuts. I'd also recommend checking out the video on roughing out: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YSMWuRx10Jo.htmlsi=wRMMFQu_Mi__TIA8. It provides some close up video forming a tenon. Keep me posted on your progress. Cheers, mate. Kez

@AllenOxendine 10 месяцев назад

@@KerryCorney thanks for taking the time to help

@KerryCorney 10 месяцев назад

Always mate.

@kenburnette1121 2 месяца назад

Informative, as always.

@KerryCorney 2 месяца назад

Thanks for watching Ken. Glad I could help in some way. Cheers for the comment🤝 Kez

@rodmiller8617 10 месяцев назад

Great job again. I am the worlds worst about taking advantage of my pockets in my smock. As I get older I forget where I put stuff

@KerryCorney 10 месяцев назад

I'm in my thirties, mate. If you check out my videos, you'll see the amount of stuff I have in them. At one point, I had four metal rulers, and then I couldn't find a ruler. Haha, might be a woodturner thing! Cheers Rod. Kez

@jonheath2790 5 месяцев назад

Hey Kerry, just found your channel. Love your honest friendly approach to all you do. Only the second person I've ever subscribed to, that should tell you something right there. The way you present with humour and keeping all the little " mistakes " for us all to see is spot on. Good luck in 2024

@KerryCorney 5 месяцев назад

Thank you so much Jon. That means a lot to me. I have some much planned for this year. Cannot wait to get stuck into it! Cheers Jon. Kezza

@tomislavtomasicwoodturning 10 месяцев назад

Awsome video as always..... Best videography turning channel on RU-vid..... Keep up with great work mate....

@KerryCorney 10 месяцев назад

Thanks a lot, mate. My goal is consistently to present every possible detail. I value your support, mate. Cheers, Kerry.

@chuckkubin2557 7 месяцев назад

An easy way to center signatures or other lettering is to count the letters, start with which one is on the center, and work away from that. Count the spaces as one. So if your name is Rick Johnson, the center mis between the J and the O in Johnson. If the words have the same number of letters, the space between the words is the center.

@KerryCorney 7 месяцев назад

Thank you so much for this, Chuck. That's an awesome way of doing things. I really appreciate it, and I might even make a video once my hand is better. Thank you for your input. Cheers, Kezza

@nelsontheseagull 4 месяца назад

Just discovered you today! All this is exactly what I need, hope you are healing well. Cheers from 🇿🇦

@KerryCorney 4 месяца назад

Thank you so much, Nelson. Please let me know if you need a hand with anything. Cheers for jumping on board. Kezza

@bespokewoodartistry1517 10 месяцев назад

Mate, I miss Australia when I watch your vids. Kept on going on…

@KerryCorney 10 месяцев назад

Thank you so much, John. It's great to see that people are finding them useful and that they're helping in some way. Full steam ahead! Kez

@claudettewoolley 10 месяцев назад

Useful tips as always, thanks😊 have a great weekend.

@KerryCorney 10 месяцев назад

Thanks so much. I am glad you got something out of it. The plate isn’t hard to make up either. Have a fabulous weekend 🙏

@brettgl21 10 месяцев назад

great video. You're a good man my brother.

@KerryCorney 10 месяцев назад

Thanks so much brother. My case is still working fine, if anyone is interested😪

@sovietholdoutxd7783 2 месяца назад

Something else you can do is get a piece of plywood, attach a faceplate and turn it circular, and CA glue some really low grit sandpaper on. At least, that's an idea Wood magazine gives, and it's something I plan on doing. Might be a bit slower, but it'll be cheaper if not free if you already have that stuff sitting around. You might even get away with using wood glue, although that might deteriorate faster because of the heat

@KerryCorney 2 месяца назад

Absolutely great idea👌 thanks for sharing comment.🤝cheers

@davidcrandell1172 10 месяцев назад

Great vid Kez.

@KerryCorney 10 месяцев назад

Cheers David. Got some bowl turning coming up this week👌 should be just as good hopefully. Thanks again mate

@FixitFingers 10 месяцев назад

Great stuff Kezza.

@KerryCorney 10 месяцев назад

Thanks mate. You'll need to get into some turning soon👌

@FixitFingers 10 месяцев назад

@@KerryCorney ha! Too many rabbit holes already 😅

@KerryCorney 10 месяцев назад

@@FixitFingers jump on in mate hahah

@robertparlevliet493 10 месяцев назад

I know I'm living at the other side of the world (The Netherlands) but you don't have to do things upside down! I mean, put the sanding disc on a jacobs chuck in your lathe and hold your bowl in your hands. You'll have much more control. A jacobs chuck won't cost you much....

@KerryCorney 10 месяцев назад

Hello Robert, I've attempted using the Jacobs Chuck previously. However, I've noticed that while using it, I need to exert sideways pressure with my upper body, which tends to tire me out much faster. In contrast, when I use the drill, I only need to apply downward pressure, making it a much more comfortable experience. I hope that explanation makes sense. Nonetheless, I value your input, and a fresh perspective can always benefit others. So, thank you. cheers Kez.

@robertparlevliet493 10 месяцев назад

@@KerryCorney you have a point there

@KerryCorney 10 месяцев назад

There are numerous approaches to tasks, and I genuinely value your input, mate.