As an independent, consumer-oriented reviewer, we are reliant on your contributions to pay the bills and remain operational. If you would like to help support our work, could use a personalized consultation, or think you might enjoy some additional exclusive content in the form of articles (mostly related to the ‘shadier’ side of the stroller industry), as well as access our regularly updated ‘Buyer’s Guide’ (which lists the models we recommend, as well as providing a lot of technical and lifestyle-related information), please visit our Patreon Page: www.patreon.com/thestrollerworkshop Thanks so much for your help!
So I took apart the bottom basket but now I can't put it back together to save my life. It would be amazing if you could post a disassembly video for that too!
Thanks! Managed to disassemble the dual version with your help. One salient difference is the lower rear button/studs in the middle are held in place in a rail with clearance too narrow to pull the button through. There's a rod held in place by a single nut and screw behind them - Unfortunately despite applying a lot of force using a correctly sized screwdriver and clamp they would not undo - My solution was to shave ~3mm off the narrow plastic lip (not ideal and I don't suggest it unless you absolutely have to, but it was still firmly held unless passing exactly square to the gap, and would only be needed if literally every button on the stroller fails).
This video is extremely helpful and informative!!! Just a question. My nano stopped working recently. The back wheel on the left is stuck in lock position ( when I unlock from the right side the left side lock wouldn’t move ) so you know what the problem might be ? I’m trying to see if I can fix it or get a spare part to replace. Thank you so much
Hi. What's the best way to clean the black chassis n wheels, when they're looking very dusty (but a wipe over don't really clean them)? Not sure if you understand what i mean
Commented on another video, how to I open the front wheel covers as the front wheels are rattling on my Nano? Is it the ball bearings that need replacing or do I just spray the front wheels with WD40? Thank
wd40 won't fix rattling probably. to get the wheel off the fork and see what's up, the outer facing should be a cap that you can pry off with a flathead screwdriver. :)