How To Remove Electrolytic Capacitors - 3 Great Methods

% 95

How to remove Electrolytic Capacitors - 3 great Methods , is a clear , informative soldering tutorial showing the 3 best removal options for your SMD Electrolytic Capacitors.
Including clear , informative video guides of every method , you will get to learn the best option for each different Electrolytic removal scenario.
Showing Do's and Don'ts and things that can go wrong , this guide is all you need to help you with your Electrolytic capacitor removals in the future.
If you enjoy this soldering tutorial and find it of use please consider liking and subscribing and make sure to hit the notification bell so as to not miss out on any future soldering / desoldering releases on the Mr SolderFix RU-vid channel.
Thank you for your time and Good luck.
Mr SolderFix
#soldering #electrolyticcap #smdsoldering
Music Supplied By
click.pstmrk.it/3s/uppbeat.io%2Ft%2Fhartzmann%2Fclear-sky/vZub/d3m4AQ/AQ/69acd055-835d-4895-a642-d46e352a7c54/4/79svh8yQKP

Наука

Опубликовано:

8 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 9

@Wes12940 Час назад

Thanks! I am learning a lot!

@SeanChYT 48 минут назад

For people that work on severely compromised PCB's with acid damage / corrosion, etc. the twist method can be more dangerous, but for PCBs in good condition it is safer, when done carefully as shown in this video. When using hot air on electrolytic capacitors, it is perhaps a good idea to wear safety glasses too. I really appreciate this channel's recommendation of the 2 irons method, which I have adopted a lot in my own work on various components. As usual, great stuff. Love the videos.

@Jogmaster9 17 минут назад

Nicely done, on the larger caps I’ve cut the tops with a dremel, pulled out the innards and cut the pins from the inside. This however takes ages so your twist method looks promising.

@Promethium666 Час назад

This is another great video with so many helpful tips, thank you! It may not be your exact cup of tea but i'd love to see how you remove and install smd micro sd and smd sd card eexpansion ports, they are an item that no one else at my workplace will even attempt to remove or install and I get the "pleasure" of doing them for the other technicians. I use a rs pro soldering station and even with the hot air set as low as i can go (lead free solder is enforced in my workplace) at about 420c while moving about the hot air and never letting it stagnate I still manage to soften the plastic or completely seperate one of the pins from the connector itself both ruin the port.

@EgonSorensen Час назад

I have replaced a few micro SD card connectors by simply soldering each leg, applying (some kind of) low-temperature-solder. Gently heat the board and every pin will melt - lift the broken part, clean all low-melt alloy away, solder each pin or use hot-air 'as-usual'

@grahamnichols1416 36 минут назад

This was so much easier than using my bread knife. :)

@JDPeters538 8 минут назад

I've pulled pads off of a Nintendo 64 and a receiver hdmi board using the twist method. It all depends on the integrity of the board and the pads. If all else fails I now use flush cutters to cut the caps.