How to Remove GY6 Flywheel, Stator, Oil Pump, & Starter Clutch on 157QMJ

Подписаться 10 тыс.

Просмотров 331 тыс.

50% 1

Thank you for watching and supporting my channel feel free to use my referral links. If you need help with any of these products call or text me Mike (209) 355-8088. I usually respond within 24 hrs.
--------------------------DO IT YOURSELF--------------------------
Time Required: 60-120mins.
Skill Level: Advance
Chemical Used:
• Bel-Ray Oil Exl Mineral 4T 10W-40 amzn.to/2TPO6dZ
• CRC Freeze-Off Super Penetrant amzn.to/2wn3BSN
• CRC Sta-Lube Anti-Seize Engine Assembly Lube amzn.to/2uK30Kp
• CRC Sta-Lube Moly-Graph Grease amzn.to/2uJlkTQ
• CRC Throttle Body and Air-Intake Cleaner amzn.to/2x5HMrd
• Loctite Heavy Duty Threadlocker Blue 242 amzn.to/2TqYtF3
• Mobil 1 Synthetic Gear Lube 75W-90 amzn.to/38yHtCh
• Mobil 1 Synthetic Grease amzn.to/38h6ilO
• Permatex Copper Spray-A-Gasket Hi-Temp Sealant amzn.to/2wkt4Mw
• Permatex Dielectric Tune-Up Grease amzn.to/39CcA14
• WD-40 Specialist Penetrant Spray (Blu Torch) amzn.to/3cotcLn
• Scott Shop Towels amzn.to/32Hjwau (optional)
Parts Used:
• Ban Jing High Torque Starter Motor goo.gl/wTTSJn
• Ban Jing Starter Clutch Heavy Duty bit.ly/3cJUxYz
• Dowel Pins 8x10mm Set bit.ly/39B3oKf
• Hoca Crankshaft 2.5mm Stroker goo.gl/1unUmv
• Koso Super Flow Oil Pump goo.gl/GTWZdB
• MotoForce CVT\Flywheel Nut M12x1.25 Serrated bit.ly/3cLiC1a
• NCY Engine Gasket 61mm Set goo.gl/Jqp2Js
• Oil Chain 22 Links goo.gl/ozLb65
• Performance Oil Seal Set bit.ly/2VCyxsI
• Starter Clutch Nut bit.ly/3cJTlo8
• Woodruff Keys bit.ly/39yuaDe
Add-on (optional):
• SSP-G 180cc Big Bore Power Kit bit.ly/2v5ZCd1
• Rocker Arms Tappets, Inlets, Outlet goo.gl/PG17mt
• Chain Guide (standard) amzn.to/2uJDR2i
• Crankcase Bushing 3-Piece Set bit.ly/2Qe6rRd
• Dowel Pins 10x14mm Set bit.ly/39CKaE5
• NGK Spark Plug Iridium CR7HIX bit.ly/2TOopup
• NCY Super Transmission Set goo.gl/hFUSqB
• Bando 835-20-30 CVT Drive Belt goo.gl/dHKAUv
• CVT Cover Anklebiter Ultimate bit.ly/3aG1qIQ
• CVT Cover (longcase) amzn.to/2VUkNcP
• CVT Cover Gasket (longcase) bit.ly/2PWLYQH
• Dr. Pulley 18x14 Sliding Weight 12gm Set goo.gl/1jY5Vh
• NCY Clutch Bell PTFE Coated Racing Star bit.ly/39DtCfo
• NCY Clutch Springs 1000 RPM Blue bit.ly/3aBUVqn
• NCY Compression Spring 1500 RPM bit.ly/2v5Vbil
• NCY Drive Face CNC-Machined Alumin bit.ly/2PYoH0q
• NCY Clutch Nut 39mm bit.ly/38tpwVG
• NCY Gear Set 15*37 goo.gl/U4yPyj
• Taida Rear Drive Bearing goo.gl/yf3qxX
• Zip Ties 12" amzn.to/32GtBo5
Tools Used:
• 8mm Hex Socket amzn.to/39AuO34
• 7mm, 8mm, 10mm, 12mm Sockets w/4" ext. Wrench amzn.to/2vow36J
• 5/16", 9mm Open and Adj. Wrench amzn.to/2vow36J
• 5/8" Spark Plug Socket amzn.to/2LT2kan
• Bearing Separator and Gear Puller Set goo.gl/Vs6C6Y
• Big Head Phillip Screw Driver amzn.to/2vow36J
• Cable Lube Tool amzn.to/2WBvpxy
• Feeler Gauge .004, .005, .006 amzn.to/2wjyiIq
• Flat-Head (narrow) amzn.to/2vow36J
• Flywheel Puller goo.gl/GNToF7
• Heat Gun amzn.to/2uHQU4i
• Hydraulic Compression 12-Ton amzn.to/3axX8mT
• Impact Drill amzn.to/2wsdfDp
• Impact Socket 17mm amzn.to/2uReXOu
• Impact Socket 39mm amzn.to/2PXNjX8
• Mallet Hammer amzn.to/38gJumk
• Multimeter amzn.to/2xe4qhc
• Needle-nose Pliers amzn.to/2vow36J
• Oil Cannister Pump amzn.to/334xxPz
• Oil Drain Pan amzn.to/330TEGM
• Oil Funnel amzn.to/2vR8D9Z
• Propane Torch amzn.to/38g4bPw
• Seal Driver #4, #6, #7 Set Kit amzn.to/38gxwJq
• Slide Hammer and Bearing Puller Set amzn.to/2x53xHE
• Starter Clutch Nut Socket 3.25” min-ext goo.gl/5rMgtS
• Torque Wrench 5-35’ Foot Pounds amzn.to/32O0FL8
• Variator Tool bit.ly/3cqJHGY
---------------------------
Need more info on GY6 BIG BORE KITS?
Visit our Blog Share: ncystore.com/blog

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 208

@willywgb 2 года назад

The hole in the flywheel has a taper with the same angle as the taper on the crankshaft. When the nut is tightened the flywheel taper slides up the taper on the crankshaft locking the two parts together. The woodruff key prevents the flywheel from spinning on the crankshaft. The puller is required to loosen the flywheel from the taper on the crankshaft. Not to over come the magnetism. Very good video.

@cobraviper670 2 года назад

He called Allen bolts "stud nuts"

@jimwoods9551 3 года назад

This looks like a beautifully designed and manufactured engine.

@richieonyt5815 3 года назад

That’s the GY6 for ya baby

@JTL-DK 4 года назад

It is not magnets holding the flywheel on, it it the tapered part of the shaft and the flywheel.

@roberta.6295 4 года назад

Im sure you know by now its not magnetic force holding the flywheel in place by instead the tapered shaft to flywheel slightly pressed on in place. Nice video. Nice of you to make the effort to help others too. Thanks!

@jameshansen2569 4 года назад

Absolutely LOVE ur box system for reinstalling proper bolt pattern

@wesmadebuilds681 9 месяцев назад

Magnetic force is. It what is holding the flywheel. It’s the tapered shaft that is holding it in place.

@bikersoncall 2 года назад

5:30 Very cool that this motor has standard bolt heads holding the stator plate to the motor, my bike's stator plate is held with Philips head bolts, (nightmare without having correct tool) I'm waiting on the tool.

@onelove8509 7 лет назад

how i wish there was a mechanic like you where i lived...the ones available in my area are awful..i have my tools now and trying to do my own stuff....but it not easy for an old guy like me..i love your videos..very,very good. thanks so much

@NCYSTORE 7 лет назад

One Love thank you for the kind words I'm sure you're only old as you feel you can do it, just use all the proper tools you'll be fine.

@connerrobertson8287 7 лет назад

How do I get the nut off I tried using a socket wrench but it didn’t work .

@NCYSTORE 7 лет назад

conner robertson conner robertson if you tried loosen it spray WD-40 "Blue Torch" let it sit for about 20-30 minutes and hit again with impact driver if any of those aren't available requires a little bit more elbow ranching and securing of the rear wheel to lock down the clutch from spinning freely. Put a bar in the rear wheel rim just make sure put some cloth so it doesn't get nicked your rim in the process of putting a more arm muscle forcing the clutch nut loose.

@connerrobertson8287 7 лет назад

NCY STORE can I use a socket wrench instead of a impact driver to get the rotor off?

@NCYSTORE 7 лет назад

conner robertson my apologies I thought you're still working on the clutch nut I didn't realize you're going for the starter clutch nut assembly. Yes, you can remove the rotor with a socket wrench remove the rotor nut just remember lefty loosey righty tighty will only apply after this first nut after that doesn't apply to loosen you have to go clockwise. Also if you don't have the special flywheel puller socket you can hit up auto parts store which more than likely have the free tool loaned program just have to leave a security deposit like purchase upfront the claw puller that help you break free for first time the super strong magnetic force holding flywheel to the rotor. You hear almost like a firework pop once it off the flywheel.

@Wolf9326 6 лет назад

Just wanted to make a PSA... the stater/flywheel is NOT held on with magnetic force😑 when the nut is torqued down it somewhat presses it onto the tapered shaft. The woodruff key doesn’t actually hold the stater in place it is just there to line it up for when you put it on. It is kept in time purely by the friction of the flywheel on the tapered end of the shaft! You guys gotta do more research.

@NCYSTORE 6 лет назад

Thank you for clarifying that I think another cometer says the same a cone pressed fit.

@30nedra 4 года назад

Ty. This guy is TRYING to school someone but he doesn't know even kno the basics! He Overly emphasized the whole video!

@pinoyexplorer8812 4 года назад

Thank you for sharing your video.Very informative 🙏. Keep going 👍

@3632js 3 года назад

good video, some terms are miss pronounced like "woodrow" key. it is called a "woodruff" key and the "keyway" is the slot in the shaft for clarity. no judgement, i have made like mistakes before.

@NCYSTORE 3 года назад

thank you now we have it listed correctly I hope ncystore.com/gy6-woodruff-key

@mathewgregoire3732 2 года назад

Having a hard time finding the flywheel removal tool. Can u send me the link??

@jrockner957 7 лет назад

excellent video my friend. thank you very much. you are correct, with the proper tools you can do anything. if i only spent half as much on tools as i did on parts i would never have had half the problems that i have. oh well, lesson learned i guess.

@christopherrivas8917 4 года назад

Great video my friend very clear Explanation my gy6 is leaking oil brand new scooter drove 1000 miles when they a leak normally is the first case? Or last case you took off at the end of the video? It look like it’s in the middle that is wet thanks

@bikescarsandmore6156 3 года назад

This video helped me a lot 💪💪💪 thanks

@justinneal6869 4 года назад

Your video was very helpful I liked the video and I subscribed

@DH-fc2os 3 месяца назад

Thanks for this i do have a question my gy6 150cc buggy gokart, has been sitting for a long time i got a new battery but it wont start it makes a sound similar to when the starter clutch is bad, i replaced it but it still will not start, i did notice the start clutch even with the new one can turn in both direntions by hand. Im wondering what the problem could be , it sounds like it just spins when turning the key.

@Gambit-jo4rw 11 месяцев назад

Which way did you turn it?

@arbo690 4 года назад

what is the torque setting for the Starter clutch assy ? The nut that required the special tool with 4 slots to undo it.

@NCYSTORE 4 года назад

Yes see under this video description for tools used. Torq 7 to 8 ft lbs starter clutch nut, however flywheel nut assy 27 to 30 ft lbs.

@arbo690 4 года назад

@@NCYSTORE Can I call you tomorrow to just check on a few extra things ?

@chriss4365 3 года назад

The stock valve guides are junk they don't even have the spring to keep it tight as it wears, Just found that out.

@NCYSTORE 3 года назад

Thanks for the tip!

@salvadorgomezjr381 3 года назад

Hi connect ignition switch on 200cc spider

@NCYSTORE 3 года назад

Not too familiar with that model sorry

@douglasrussell9826 3 года назад

I'd like to know what kind of stator goes on a df300 trike

@basitbukhari7805 3 года назад

the magnet part only goes on one way don’t worry about lining the T it lines up by itself, andto remove the magnet you can use a bearing puller

@likeitornotbut5900 4 года назад

But cant you just use a regular pullerl to get the flywheel off

@irocss85 2 года назад

Great info thanks

@joshuamurphree150 6 лет назад

What is the bracket called that held the stator wires back against the timing cover?

@NCYSTORE 6 лет назад

Joshua Murphree try "GY6 stator wire holder brace" not sure if that's the technical term of it I know what you're talking about just don't know what's zactly called

@joshuamurphree150 6 лет назад

I found a lot of results on eBay searching stator wire retainer. 👍

@bigg4418 6 лет назад

where did you get your speciality tools

@NCYSTORE 6 лет назад

g conway if you look at the video description will tell you all the most of what's tool used and link purchase them. Let me know have anymore questions?

@shawngilbert928 5 лет назад

Harbor freight, they sell pittsburgh brand

@PgfgIslem 2 месяца назад

Thank you

@arbo690 4 года назад

Apart from making a socket myself, where do you order that special socket from ?

@NCYSTORE 4 года назад

Hi please see all tool used in video description.

@arbo690 4 года назад

@@NCYSTORE thanks I have now foubd your complete parts list and website. Totally Brilliant

@mariranasalcedo1660 4 года назад

Hi i bought a Dong Fang Chinese dune buggy replace most of the engine it turns on and it runs but it doesn't run very fast or at full speed going forward but when you put it in reverse it runs pretty fast like i said i replaced most of the engine and it just not working i bought it used when i got off the trailer and was going to take it for a spin it just stopped working help what could it be its 200cc engine

@NCYSTORE 3 года назад

we have very little experine on those and parts unfornately does it look like this cylinder ncystore.com/g-cylinder-57.4mm-150cc-big-bore-kit-cast-piston-fit-56mm-gy6-atv-buggy-quad

@Adebukola.Badejo 3 года назад

Greatone

@dannymartin489 4 года назад

The Videos THANKS

@luhv8ted 6 лет назад

It's a "Woodruff" key, FYI. Otherwise, thanks for the info!

@NCYSTORE 6 лет назад

luhv8ted yes that is correct my English pronunciation might be off that's how you spell it though.

@MiguelLopez-sj2ib 2 года назад

Dude sounds weird

@AB-kg6rk 4 года назад

ewww, get that cleared up and redo it. good info but... yech

@bikersoncall 2 года назад

4:29 ; ''only thing holding right now.... is the magnetic force''. To other viewers, doing first time stator work; The reason you need a puller is not due to the magnetic field, it is the tapered fit of the shaft to hub, or hub to shaft, once that bond is broken via the flywheel puller, there is a little bit of magnetic attraction, remove the flywheel carefully, be mindful not to damage the pulse coil adjacent to the flywheel. PS; On install, don't forget to align hub, with the keyway on the shaft, no need to force it, flywheel has a detente that slides into that groove on the shaft.

@marcnissen578 Год назад

It’s no different than a any other small engine if had apart a s rebuilt

@GUD1HUH 2 года назад

Thank you so much for this video!!!! Helped me out a ton for my ruckus, was super hesitant at doing it at first but this gave me a lot of confidence. Appreciate you!

@kachiskid 6 лет назад

Really good job on your screw organization.

@kachiskid 6 лет назад

Respect paid to you bro, thanks for the help and idea. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jFQBwB6_erU.html

@maiorciprian 7 лет назад

it`s actually a cone press fit holding the rotor on not the magnetic force as you described

@NCYSTORE 7 лет назад

Ciprian Maior thank you for your "alternative" input.

@maiorciprian 7 лет назад

not really "alternative" since it is the only reason why the flywheel sits so tight on the crank

@NCYSTORE 7 лет назад

Ciprian Maior just saying it's an "alter-native" like alternator. :)

@maiorciprian 7 лет назад

also a Woodruff key not a Woodrow

@NCYSTORE 6 лет назад

Ciprian Maior thank you for clarifying that.

@johnathanhimka 7 лет назад

stop sniffing!

@NCYSTORE 7 лет назад

sorry had a bit of head cold that day.

@johnathanhimka 7 лет назад

Haha jk i dont care

@deleted203 3 года назад

I was riding and my stator went out and wouldn't start. Replaced it and the magneto won't spin. Starter just spins. Brand new bike less than 50 miles on it. New ncy cdi upgraded spark plug coil. Everything tests good as far as the multi meter shows. When the magneto lines up with the switch it will try to spin the magneto and I'll get spark. But it only spins like 1 turn then stops. Battery fully charged and starter good. Is it my starter clutch or bad magneto? Only two things left besides valves which I haven't messed with cause it ran great before it died at the stop sign and wouldn't start. Don't wanna push the bike again that far. Lol

@johnathanvanloggerenberg5373 4 года назад

Good video but it's not magnets holding the flywheel on. The crank is tapered so basically you pulling the flywheel off the cranks tapper

@Remedy718 Год назад

My removal tool threads to the right.. So I couldn't get it off. Need help

@veli.m.thwala6053 2 года назад

Hi! Can you help me, I have a scooter with the same engine as this one. At first it started with a clicking sound of a solinoid while starting it , I just taped the starter with a screwdriver and tried again it started... following day I try to start and it gave me dizzy noise like ZING!!ZING!! from the engine like it's failing to turn...I took out the starter tested it and it's working....did a research and usually it's a starter Bendix...so I opened from the Bell housing side but I didn't find that starter Bendix so I was about to go for the stator side which you are doing in this video but I see no starter Bendix again.......I'm confused can you please help me!!!

@bikersoncall 2 года назад

Midroll ads drive traffic away, lowering 'Retention' scores. No one lets Midroll Ads run. I let opening and closing ads run, in support of content creators, and encourage others to do the same. I close out any video that includes Midroll Ads.

@joeythomas9062 Год назад

I bought a brand new 150cc gy6 long case engine for a project buggy and have went through 3 different wiring harnesss for it... Does anyone know which exact harness to buy for it??

@rainbowarthub 2 года назад

what size flywheel puller is that? the link doesn't show the item anymore

@cezary8222 6 лет назад

great video, thanks for uploading :)

@raintawpintal1803 Год назад

Dud thank you for your video is Soo much helpful, I have problem my crank case cover is crack.. And the worst part I don't know where I've find or order

@1theschneks 5 месяцев назад

Would a flywheel old on a new stater cause gy6 125cc not to have spark

@paulwalker1542 Год назад

I wish you knew what the hell you were talking about. It would make the video more informative

@elghaziteck 5 лет назад

شكران اخويا الله يجزيك بلخير شحال و انا نقلب على هاد لعجب ياله لقيتو واشوكرا بزاف

@joeythomas9062 Год назад

Whats the best wiring harness to get for a brqnd new 150cc long case gy6??

@OurAbandonedWorld 5 лет назад

Hi. What size puller is it ?. Do you also need additional specific tools to remove and install the crankshaft?.

@NCYSTORE 5 лет назад

Yes, please see video description tool used and link.

@OurAbandonedWorld 5 лет назад

@@NCYSTORE okay, I'm in the UK. So same as this ? www.racing-planet.co.uk/alternator-rotor-puller-naraku-m24x1-right-external-thread-p-264-1.html#.XIrVMWSnyJ0

@souf900 Месяц назад

What size is the flyeheel puller 125cc kymco

@navanava2460 9 месяцев назад

If you can help me, please What size is that special tool to remove the magneto?

@Koelyy 6 лет назад

Having problem with my starter switch does the stator have anything to do with it most of the time I have to go thru the selonoid. I have change all electrical components

@NCYSTORE 6 лет назад

The electric opponents are better just to replace and troubleshoot try to replace the switch see if that solves your problem

@باعوص13 6 месяцев назад

Every time the oil pump needs changing for this engine🤔

@marcnissen578 Год назад

It’s not the magnetic force it’s a tapered shaft with a key for timing

@ejae1853 3 года назад

Question? Question? Is it possible to swap a 200cc scooter engine with a 90cc scooter engine? I am a beginner to scooters. I wanted to start to a lower phase before going with higher speed. If it is possible, where can I buy a 90cc engine from Honda or Kawasaki? I hope that some could direct me to the right direction. Thanks in advance.

@NCYSTORE 3 года назад

Probably we don;t specailize in Honda or Kawasaki engine sorry, only GY6 swap!

@humanbeingfromearth 4 года назад

Hey when I turn my ruck key to the "on" position, my starter engages without me using the button. Is this a bad starter solenoid? I even disconnected the right controls, and got the same result. Any help is appreciated, thanks and be well

@JetSkiBuyFixPlaySellChannel 3 года назад

Sounds like the solenoid is stuck in the on position or there's a problem at the switch. Use a volt meter to see if you have 12 volts at the solenoid before you turn the key to the start position.

@youcefgallardo2892 3 года назад

thank you from algeria ❤️

@NCYSTORE 3 года назад

your welcome.

@dhiaelhaktaleb2926 3 года назад

كون جزايري ما يوريلكش مليح 😅

@MrDrakojulio 4 года назад

that flywheel is equal to a 8 poles flywheel ?

@Jonathancabanyc 9 месяцев назад

Now I have a more in-depth understanding of the GY6 engine's electrical, starter motor, and Clutch parts. Very interesting video for me as a GY6 motorcycle user.

@lb4899 5 лет назад

So what if my flywheel just slides off by hand lmao

@NCYSTORE 5 лет назад

I don't understand

@joshuamurphree150 6 лет назад

Does anybody know what size of woodruff keys go on the crank shaft mine broke and I’m having trouble trying to find a replacement . Ps very helpful video by the way thank you.

@NCYSTORE 6 лет назад

This may help: ncystore.com/gy6-woodruff-key

@joshuamurphree150 6 лет назад

Yes it did thank you very much.

@cobraviper670 2 года назад

Say it with me now. Wood-druff key 🔑

@ls_nation470 11 месяцев назад

Where is the bendix on 150cc scooters ?

@raymondbetancourt6498 3 года назад

Can the magnetic receptor of the GY6.be installed on the 05 Zuma stator ?

@NCYSTORE 3 года назад

Sorry not too familiar with that scooter model

@lukeoconnor4653 3 года назад

The bolts on my flywheel fan will not budge at all,any ideas?

@NCYSTORE 3 года назад

Sorry late response you can try to get blue torque by WD-40 spray on a little bit then sit

@NshsShdh-jx9ob Год назад

👍👍👍👍👍🥰🥰🥰🥰🥰🥰♥️♥️♥️♥️

@Lil_eee 10 месяцев назад

Better oil pump what does it do ?

@johnengland8619 8 месяцев назад

Thanks for the content

@mohamadjerade7660 2 года назад

They are bolts not screws😭

@rizalmdyusof5764 5 месяцев назад

thank you teacher

@kalani1963 6 лет назад

Can this all be done while the heads and piston are still installed?

@NCYSTORE 6 лет назад

Kawai hao if you're asking to remove all the stator unit while the cylinder is still installed yes however in order to split the crankcase open you eventually have to remove the cylinder jug but piston can still be attached to the crankshaft.

@racerx143 6 лет назад

When you talked about finding TDC you said line it up with the T.. Did you mean line it up with that line which is just left of the T?

@NCYSTORE 6 лет назад

Yes that timing cover cliff-hanging piece needs be directly above the T mark on the metal flywheel.

@racerx143 6 лет назад

Ok thanks. I have seen people say use the line which is just next to the T. This is the first time I have heard to line it up with the actual T.

@GeorgeRoberts 4 года назад

@@racerx143 Same here. Never heard about the actually lining up the vertical line of the "T" with the timing mark on the side casing??

@johnbeaudet1083 2 года назад

What size mm is the castle nut

@trpldc99 3 года назад

I recently switched to LED turn signals. The brake lights don’t work. Battery dies faster, and Headlight burn faster. Could switching out strator and Regulator fix this ? I have this same engine.

@christopherpalmer929 3 года назад

What is that tool called

@mikecrawford4506 3 года назад

Do i need Loctite on the castle nut? I just installed a replacement heavy duty starter clutch and about 20 miles of city riding(so maybe 20-30 starts), its back to just the spinning sound when i try to start. Im praying to god its just because i didnt use Loctite and the castle nut just came loose. 🙏🙏🙏🙏🙏🙏🙏 🙏

@mikecrawford4506 3 года назад

Also , I'm not sure if that short amount of time ruined my case gasket but in case it did, would it be okay to use high temp liquid gasket because I have a tube of that sitting around and I can't really afford to wait for a new gasket to show up because I use my scooter for work. I'm in the hospital right now for probably 4 or 5 days but as soon as I walk out of here I'm going back to work on that scooter. Thanks for any help you can give.

@dooffwellingtonthe3rd44 2 года назад

oh wow!, i noticed you have a bigger washer then the crown nut to hold the starter clutch. That is my problem with it coming off, because my washer is to small to hold it all. I will try that, wish me luck

@wordlogicvee 5 лет назад

i saw in another video to line it up between the two lines above the TF. will it still run that way? I followed that advice and now i hear a knocking sound like its running a little ruff. I will remove it and line it up like you suggest instead

@matsburger27 5 лет назад

Well its not holding ong by magnetic force the crank and the fly wheel have a cone shape thats the reason its on there so snug. and if you dont want to pay for a fly wheel puller you can hit it with a rubber mallet and it wil come of

@Roland-Henry 4 года назад

Ran into an issue replacing my starter clutch. After removing the nut and washer, the starter clutch won’t slide off. Any ideas? Thanks in advance.

@quentin1956 5 лет назад

I'm really hoping you can help me out I did not organize my screws and now I don't know which go where

@NCYSTORE 5 лет назад

You don't have to be perfect just do a drive bit with the screws that you currently think you know where it's at and just try to see make sure you don't force it to go any deeper than can and try to feel your way through it you'll be fine

@quentin1956 5 лет назад

@@NCYSTORE have been trying but theres a few that are pretty darn close in size and it's a tad frustrating, but I will continue with your advice in mind. Thank you!

@NCYSTORE 5 лет назад

Nothing on the GY6 is precision trust me however people swap them all time for Allen bolts and they're always not exactly the same size off by centimeters is still works perfectly. Don't sweat it do the best you can, you might actually find it better fit at certain both eyes certain areas just when you stack them together you'll realize that maybe this one needs to be longer or this one can use a shorter one.

@mohamadjerade7660 2 года назад

New oil pump comes with "allen thread lug nuts". Never heard of that before😂

@massimomasseroli9364 5 лет назад

ciao, una domanda, vorrei far andare più veloce il mio scooter, attualmente raggiunge la massima velocità di 80Km/h, ho cambiato il variatore con massette da 17 gr ho comprato la centralina cdi aperta ma non posso collegarla perchè nel mio scooter nel pin della centralina originale a quanto pare manca il cavo che dà corrente mi piacerebbe far arrivare ad almeno 130km/h cosa mi consigli? e se possibile contenere i costi. hello, a question, I would like to make my scooter go faster, currently it reaches the maximum speed of 80km / h, I changed the variator with 17g masses I bought the CDI unit open but I can't connect it because in my scooter in the pin of the original unit apparently missing the cable that gives current I'd like to get at least 130km / h what do you recommend? and if possible contain costs.