How to Remove Plastic Covers on Most Modern Sewing Machines

Подписаться 59 тыс.

Просмотров 79 тыс.

50% 1

See how to get inside a modern sewing machine without damaging the plastic covers.
Support the channel, be a Patron: / sewingmachinerepairguy
Learn more about me on my website www.sewingmachinerepairguy.com
Also I'm on facebook / sewingmachinerepairguy
Check out my Etsy store! www.etsy.com/shop/SewingMachR...
Some online resources for Sewing Machine Repair
s-ish.com/
www.manualslib.com/
store.tandtrepair.com/
www.ebay.com/
Here are some of the products I use to repair sewing machines. These are affiliate links, they don't cost you any extra. They provide me a small commission if you purchase these products via this link. This helps me continue to provide videos for your enjoyment. As an Amazon Associate I earn from qualifying purchases.
Tri-Flow Sewing Machine Oil (my personal favorite) amzn.to/2XWMeSR
Tri-Flow Grease (my favorite grease) amzn.to/2Y1e28r
Bottle brushes amzn.to/3gVcohE
Nylon brushes amzn.to/3gQGenh
Makita vacuum amzn.to/2Xv2hrZ
Makita impact driver amzn.to/36WJwAI
Wera screwdrivers amzn.to/370qpFS
Starrett S423Z Steel scale set amzn.to/2Xy4pzn
Krud kutter amzn.to/2Bz7rLf
Denatured Alcohol amzn.to/2z0kSTk
Towa tension tester amzn.to/2U6Uq1O
Pliers, Parallel Flat Nose Smooth Jaw amzn.to/3gPN4JN
Magnetic Tray amzn.to/3oyVSaJ
Scripture quotations are from the ESV® Bible (The Holy Bible, English Standard Version®), copyright © 2001 by Crossway, a publishing ministry of Good News Publishers. Used by permission. All rights reserved. May not copy or download more than 500 consecutive verses of the ESV Bible or more than one half of any book of the ESV Bible.

Хобби

Опубликовано:

26 дек 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@diannhoyt1844 2 года назад

I have a Singer Confidence that I have been using for years and has served me well. Last month I broke a needle and the machine jammed with the presser foot down. I fussed and fussed with no success and decided I needed help so I called a local sewing machine repair shop. The gentleman asked what make and model I had and then told me to just throw it in the trash because it wasn’t worth saving. So I turned to RU-vid and found your videos. Once I cleared the carnage of fabric and thread away from the presser foot I was able to lift the presser foot up and down. But it still was making a mess. I watched your video regarding the bobbin housing and I followed along step by step. THANK YOU! It worked and my little Singer sewing machine is humming right along. God Bless you and your family Merry Christmas :)

@SewingMachineRepairGuy 2 года назад

Awesome! Great job getting your machine running again!

@Kaykdoa 3 месяца назад

This is the only guide that mentions all the various clips and that you need a pry tool. Thank you for your help with my borrowed *Curvy 8763* 😁

@sondragingery5949 2 года назад

I have never found anyone else telling the best way to do this. Thank you so much!

@sondragingery5949 2 года назад

I just got on your etsy page and ordered these.

@SewingMachineRepairGuy 2 года назад

Thanks for the order!

@greg7191 2 года назад

After countless U-T vids that realy weren't helpful, I spent 3 days trying to undo all those plastic clips & that one little hidden screw. I share Ronald's concern, maybe beefing them up with the "super glue & baking soda" vid you did. I'll be looking into that...Thanks for this vid.

@tracyquinlan5216 6 месяцев назад

Trying to get to the spring on the back for the feed dogs that I think broke. My local repair shop wants $129 to repair it solely based on it being computerized. I ordered your pry tools, so wish me luck!🤞

@candicebaker3080 4 месяца назад

Thanks. I just ordered these from you. I have the same machine. I need to replace the foot control jack harness. I pulled the screws and decided i needed to look into this more. Im glad that i did. Thank you

@conqueringmountscrapmorewi2509 2 года назад

Such a great video! I'm just hand sewing while I watch your channel! Thanks for posting!

@VeronicaF-vn4bq 3 месяца назад

I would live to buy a prying kit but with shipping to Canada will set me back close to $50. Still a useful video though, thank you!

@tommeier4659 Год назад

Thank you so much. I spent an hour trying to open a Singer 2259 but your video gave me the missing Informations. Fortunately I got those pryingtools - for opening stuff in a car.

@Bookdragon3000 11 месяцев назад

Thank you sooo much, I’ve been stuck on getting this front cover off for a hot minute now ❤️

@RustyBobbins 2 года назад

How did I miss this video! The part of the job I hate the MOST! Thank you for the tips!

@strawberryemery 2 года назад

thanks for this! i've taken apart my machine before (exact same one in the video) for a deep clean, and this reminds me it's time to do it again. i used different colors of nail polish to match up what screws go in which hole. i've bought the pry kit, those latches are tricky.

@sandyfox110 10 месяцев назад

Thanks for showing us how to remove the clips it showed me how to get in to my machine❤

@cocasio7190 2 года назад

Merry Christmas 🎄! Thank you for sharing. Blessings

@aimee-made Год назад

I picked up a Brother LX2763 very reasonably at a thrift store. Motor runs like a top, bobbin winder is perfect.... but something strange is going on with the feed dog movement - I'm going to need to open 'er up. This video was very helpful, thank you! Also, oh my goodness, when you got that open..... SO. MUCH. LINT! I'm fastidious about cleaning my machines but I wonder if there's a big lintball packed deep in there that I'll find when I pry it open!

@aimee-made 9 месяцев назад

Update - someone had fooled around with the feed dog height adjustment screw, which was a tiny hex screw. Hardest part was finding a screwdriver bit to fit it! It runs like an absolute champ now!

@Wowsheeka55 2 года назад

Thank you-this is wonderful information!

@SergiiNechuiviter 4 месяца назад

Lego key shows itself as brilliant tool.

@geraldoakley7688 6 месяцев назад

Hi cool video, question where would I get an on/off switch for my Janome it looks the same as is in the machine you are working on, it just fell apart, I have it removed so just need a new one

@ronalddevine9587 2 года назад

How many times taking it apart before those clips break. It even sounds like junk. I TREASURE my Kenmore 1941. ALL METAL

@SewingMachineRepairGuy 2 года назад

There is definitely a limit.

@jarikinnunen1718 Год назад

The endoscope might be helpfull to see clips. When you get some of them open, put something in the gap.

@get2zero 2 месяца назад

Any chance you know how to remove the cabinetry near the head of a Singer Legacy c440. Unlike the one in your video, there appears to be no screw that holds it on.

@feelbooster 11 месяцев назад

I have a singer 7258 110v that i mistakanly connected to 220v. A minute later it turned off. What can i do? How can i get a replacement card for this machine?

@dianach5231 4 месяца назад

Gracias, mi máquina es parecida pero no encontre ningún tutorial en español por lo que decidí buscar en inglés para ver si encontraba. Me fue muy útil, no hablo inglés pero el vídeo fue claro de como se debe de hacer

@luzdeluna_coaching Год назад

Hi Wes - I have an ALFA Next 10 and the issue is it has plastic covers over the screws… how do u get those off?? Thanks!!

@kneeha1 9 месяцев назад

I am considering buying a new machine for sewing and later quilts. Singer 7285q is marketed as one of the good ones, how is this machine, is it good? Do you have any recommendations?

@dianadelaplaya8405 7 месяцев назад

Can you send or post a link for the pry tools. I live where online shopping is my only option. Thanks. And thanks for the video.

@mhd786jna3 10 месяцев назад

Hey there I have a bernina 92c amd when I turn it on it just makes a clicking noise, I sent it to the company and they want $900 to fix it i cant afford that ,they said the board is gone amd needs replacing, but I think it might be repairable I tried to get it open but I seem to not be able to get past the main section any advise? Thanks in advance

@myhouse108 2 года назад

I am hoping you can tell/show me how to remove the top cover on a Singer Creative Touch Fashion Machine 1036, The stitch selector is not working and to get into that mechanism there is a knob with a lever protruding to the right. I can send a picture if that would help. Thanks for any help you can give me!

@julyalbertromea1754 2 года назад

Sir i need your help. I have Brother Innov-is 750e. The issue is, whenever i attached the arm of the machine, it doesn't detect. Please need your help

@fatcatfrankie8321 8 месяцев назад

Hi. I have a brand new Singer but the screws have noon factory tightened. How can I turn them without stripping the s few head. They just will not move.

@joybeachler7083 9 месяцев назад

Where can I buy the purple cover removal tool?

@taraiza878 4 месяца назад

Thank you …. I was brave until I encountered those darn clips, then backed away slowly. Lol

@meisamozzar4362 2 года назад

Please help me sir my machin sounds unusual I don't know frome where this sound come! What should I do?

@Peace2yaa Год назад

I have a Brother XM2701 and I cannot figure out how to gain access to handwheel. It's jammed and won't turn at all. There's nothing in the bobbin case and it's the bobbin winder is not engaged, so what else could be jamming it. I mean it won't move even a cm!! But for the life of me, I cannot figure out how to get inside of the. Machine to figure out what's wrong! I'm on a fixed very tight income and cannot afford to have it repaired and I need my machine! What can I do to get inside and find out whats wrong? Thank you so much for any advice you could give me😊

@Lic.en.derecho 8 месяцев назад

the one piece i need to take off you did not...that white one on the front 😂

@creamberry 2 года назад

This is a horrible machine. The Singer patchwork machine mostly comes with a timing problem. People use this machine with too heavy fabric that messes up the timing. Oh by the way, I sooo hate the clips ... Great video!