Step 1: On rear chassis remove screws with star shaped screwdriver
Step 2: Pull up rear chassis cover and pull apart red and black wire then pull the red, white, and blue "charging socket" plug out of controller card to remove rear chassis completely.
Step 3: Using wire cutters, cut off zip tie that is holding magnetic brake cable together.
Step 4: unplug magnetic brake cable from controller card and plug back in.
Note: Make sure the plug latches correctly
Step 5: Plug all wires back in and put rear chassis back on the same way.
Step 6: Screw screws back on to secure rear chassis cover
21 июл 2022