Тёмный

HOW TO REPAIR A HOLE IN A FIBERGLASS BATHTUB | Fiberglass Crack and Hole Repair (Time Lapse) 

DP Tubs Reglazing
Подписаться 17 тыс.
Просмотров 212 тыс.
50% 1

Here is a time lapse of a crack / hole repair in a fiberglass bathtub.
FOLLOW ME ON INSTAGRAM: / dp_tubs
Products Used in Videos on this Channel:
Material Used:
Bondo Fiberglass Resin: amzn.to/3rneluX
Bondo Fiberglass Mat: amzn.to/3nNUjXZ
Bondo Glass Short Strand: amzn.to/3xlYuh0
Ryobi Corded Drill: amzn.to/3xkf3K6
HDX Mixing Cup 32oz: amzn.to/3p0JD7L
2" Paint Brush 24pk: amzn.to/3nLdZMd
120 To 3000 Assorted Grit Sandpaper for Wood Furniture Finishing, Metal Sanding and Automotive Polishing, Dry or Wet Sanding, 9 x 3.6 Inch, 36-Sheet: amzn.to/312NYzi
Bondo Spreader Pack: amzn.to/3HNIEAJ
Bondo All-Purpose Putty: amzn.to/3CPE29p
Zinsser 1-2-3 Primer: amzn.to/3oXAmO2
Krylon Alternative: Rustoleum Tub and Tile White: amzn.to/3FFTcQi
Caulking DAP Stretch: amzn.to/30YsZhe
Napco Extra Strong Acid Etch: www.napcoltd.c...
Jasco Paint and Epoxy Remover: amzn.to/3xniGik
Loctite Foam Gap Filler: amzn.to/3xkgTuu
Capspray Titan Compressor 75 / 95:
Titan 0524041 or 524041 Capspray Maxum II HVLP Spray Gun with Free Check Valve Kit 0297051: amzn.to/3CUJo38
3M Half Mask Reusable: amzn.to/3DSmomO
3M N95 Respirator Filter 10pk: amzn.to/3cNv9CI
3M Cartridge Replacement Pack: amzn.to/2ZpjhUq
Fume Exhauster 8" Duct Tubing: amzn.to/3cKe64v
Portable Ventilation Exhaust Fan here: amzn.to/3k5Gz5W
Tack Cloth: amzn.to/2Zks2yT
Rustoleum Appliance Spray White: amzn.to/3r8Iw8T

Опубликовано:

 

28 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 216   
@vikto07081980
@vikto07081980 Год назад
This little ru-vid.comUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif tub works perfect in our 6 x 6 shower and is easy to get in and out. Also easy to drain.
@renedelafuente123
@renedelafuente123 2 года назад
Man fantastic job. I need someone like you to fix my fiberglass bathtub. It takes time, patience and a lot of hard work. I have non of those traits available to me. But thanks for the video, I'll play it for the guy that's willing to tackle the job for me.
@ttwil9810
@ttwil9810 4 месяца назад
The only thing good he did here was use gel coat instead of Rust-Oleum
@destinimurphy398
@destinimurphy398 Год назад
I just knocked a small hole in my bath tub the other day. Thank you for posting this and leaving the list of materials needed plus links. Super happy i found this and that hope is not all gone in soaking in a hot tub every weekend.
@halomanhawk
@halomanhawk 2 месяца назад
What list?
@wendybohm8646
@wendybohm8646 3 года назад
Amazing! I never thought that tub could have been saved. You did CPR and the whole shabang on it. Great job Danny!
@madeleineborrett3153
@madeleineborrett3153 10 месяцев назад
Hi Danny could you tell me what tou put on next are put the fiber on and rubbed it down what was the compound you put on next then you sprayed it with white that would be so helpful old lady having fun trying Mine was a cracked I have done the top and underneath the bath. I would be very greatfull Mandy B
@davidater9
@davidater9 5 месяцев назад
Amazing! I also like your list of supplies.
@moniquerobbins7941
@moniquerobbins7941 2 года назад
Thank you for doing this. I found another video you did that has voice so products are noted. In this video, you use: 1. Bondo fiberglass resin and mat 2. the brown stuff - looks like 3 coats. question 1 - is the brown stuff the Bondo Glass? question 2 - in a different video with the voice and products, you had a 3rd step/product of the Bondo All-Purpose Putty. You have that listed as a product in this description, but I didn't see you use it. Does the Bondo All-Purpose Putty need to be used also, or is the fiberglass resin and glass enough? I have a 2 inch hole in a custom therapy fiberglass pool - we are removing a jet that keeps leaking and filling the hole like you show in this video. step 1 - the fiberglass resin and mat is needed structurally. But then, I am unsure on the glass and putty. question 3 - what does the Bondo glass do? and what does the all-purpose putty do? Thank you in advance and I hope you will reply.
@DPTubs
@DPTubs 2 года назад
Always use the bondo putty to smoothen after bondo glass or resin
@MrSevenAM
@MrSevenAM 2 года назад
hi Danny ! This is a great video and your works are just amazing ! in fact Never knew that broken bath tubs can be repaired with such new looks. do you have service team in india by any chance .thanks !!
@mikewatt8706
@mikewatt8706 2 года назад
In India they wash in a ditch
@janeeleanor4849
@janeeleanor4849 4 месяца назад
Will this same process work on repairing holes left by a tub faucet removal?
@crusiethmaximuss
@crusiethmaximuss 2 года назад
Wow!!! Excellent work!!!
@DPTubs
@DPTubs 2 года назад
Thank you!
@crusiethmaximuss
@crusiethmaximuss 2 года назад
@@DPTubs 😎🤙🏻
@zpakk4499
@zpakk4499 Год назад
Yeah, uh....99/100 people would have said that is junk, you proved them all wrong. Nice work!
@candyman63121
@candyman63121 3 года назад
Would it be possible to wet sand between layers to keep dust down?
@seanmimder1830
@seanmimder1830 Год назад
On second thought I'll just pay a guy
@joshthomas2406
@joshthomas2406 10 месяцев назад
😂
@robletto841
@robletto841 11 месяцев назад
Well done!!!
@tyangums6551
@tyangums6551 2 года назад
Wow that is amazing work
@TOMA-ny7gg
@TOMA-ny7gg 5 месяцев назад
amazing video first tank u very much second can u explan if i need all that products?there is no shipping of that products to my country can u have products from aliexpress that u can recomended? thanks
@frankroccato2382
@frankroccato2382 3 года назад
Hi I have a smaller hole then the one you fixed but it’s as long with a couple cracks in my tub only it’s a bit higher up closer to the top can the same thing be done if I were to do it to my tub and if so can you list the supplies you used as well thanks . Fantastic video really Helpful
@DPTubs
@DPTubs 3 года назад
Yes I will!
@rhadawg5857
@rhadawg5857 2 года назад
Yeah man you need to post everything you used in this I’m trynna do the same thing but not following everything you used
@jacquelineespinosa8040
@jacquelineespinosa8040 2 года назад
Exactly.. like the fabric... liquid etc..etc... I have a hole in the tub surround that needs to be fixed.. music is great but need info
@Wesmancan
@Wesmancan Год назад
The cloth is fiberglass and a2 part apoxy resin.
@JustPJB
@JustPJB 7 месяцев назад
What was the spray paint you used for inside the bath?
@DPTubs
@DPTubs 5 месяцев назад
I use either Rustoleum Appliance spray or Rustoleum High Performance Enamel white I should have links in the description for them
@jessicastewart2479
@jessicastewart2479 2 года назад
What grit of sandpaper do you use at the varying steps. And what grit on machine?
@DPTubs
@DPTubs 2 года назад
120 grit
@jessicastewart2479
@jessicastewart2479 2 года назад
@@DPTubs Thanks! Products list indicates fiberglass mat but it looks like your using fiberglass cloth. I am doing identical repair but in the wall surrounding tub. Just want to be sure I have proper items for project. Thanks again.
@johnlira3316
@johnlira3316 7 месяцев назад
Same process if the hole is on the bottom correct?
@DPTubs
@DPTubs 5 месяцев назад
Similar but I do have videos with cracks at the bottom for you to watch
@MrFilimn
@MrFilimn 11 месяцев назад
That is a good repair.
@googleforcedmetomakethis
@googleforcedmetomakethis 2 года назад
What if the hole is on the part where you feet go? Should I put something in the hole before I patch? You know for support
@DPTubs
@DPTubs 2 года назад
I just posted a video with the crack at the bottom and filling with foam support
@julieawheeler4062
@julieawheeler4062 3 года назад
Whot was it u yoused ? And whots the meseraments
@GeeMuna
@GeeMuna 3 года назад
You located in Melbourne Australia please?
@henryj.810
@henryj.810 2 года назад
whats that 3M soltution you where putting into resin cup??
@DPTubs
@DPTubs 2 года назад
It’s the resin hardener that comes with it!
@alt3574
@alt3574 Год назад
Just curious, how much did you charge a customer for the labour work?
@DPTubs
@DPTubs Год назад
$350
@fijinadifancyhotel9497
@fijinadifancyhotel9497 10 месяцев назад
hi, good job! but can u list the materials plz
@metzabbott1358
@metzabbott1358 Год назад
What products did you use?
@luiscp7948
@luiscp7948 3 года назад
Im big fan of yours man!, can you spray krylon 2 part epoxy with a Graco magnum x5 airless sprayer or does it have to be an HPLV necessarily?
@jorgeencarnacion10
@jorgeencarnacion10 4 месяца назад
Where it’s your location Danny
@SKIDOOROX04
@SKIDOOROX04 3 года назад
What spray paint do you use right before using the krylon tub and tile?
@DPTubs
@DPTubs 3 года назад
Primer Zinsser 1-2-3
@tonnymitch4016
@tonnymitch4016 2 года назад
I just had an incident where I have a hole 🕳 in my tub that has yet to be fixed. And I’m so nervous about the cost and repair that I most likely will be responsible for 😰😰😰😰😰😰😤😤😡🤦🏽‍♂️🤦🏽‍♂️🤦🏽‍♂️🤦🏽‍♂️🤦🏽‍♂️to hear the cost effectiveness is scary because it’s too much. I live in a loft. It messes with me… the paranoia
@fivestarconstructionllc7430
@fivestarconstructionllc7430 2 года назад
How much did you charge for that repair?
@DPTubs
@DPTubs 2 года назад
$350
@caseymaton4791
@caseymaton4791 2 года назад
What materials did you use please 🙏🏼
@gretzkysyotes
@gretzkysyotes 2 года назад
Fiberglass sheeting, Fiberglass Resin w/hardener, The red and gray stuff was probably a version of body filler (Like you'd use on a car).
@nicholasvielma2763
@nicholasvielma2763 2 года назад
the names of all materials thats only we need please
@DPTubs
@DPTubs 2 года назад
In the description box
@robertf7982
@robertf7982 Год назад
you didn't say which product you use at the time
@DPTubs
@DPTubs Год назад
I think I may have shown it.
@svenno9951
@svenno9951 5 месяцев назад
magic
@anahletoa6692
@anahletoa6692 3 года назад
Can you please post the materials? I got some but not all of it. 🙏 Appreciate it
@DPTubs
@DPTubs 3 года назад
Ok I will within the next day or so!
@anahletoa6692
@anahletoa6692 3 года назад
@@DPTubs thank you 🙏
@anahletoa6692
@anahletoa6692 3 года назад
@@DPTubs I just need to know the red paint/liquid that you poured over the “Bondo Glass”.
@DPTubs
@DPTubs 3 года назад
@@anahletoa6692 that’s the cream hardener that comes with the bondo glass
@anahletoa6692
@anahletoa6692 3 года назад
@@DPTubs can’t wait to start on my tub. I’m going to show my husband and brother that I got this. 😂🥰 Thank you again.
@raulrivas1422
@raulrivas1422 Год назад
Y El nombre delos materials k
@DPTubs
@DPTubs Год назад
En la Caja del descripcion
@lauras3002
@lauras3002 2 года назад
Some verbal instructions to explain what you're doing and why would have been helpful
@DPTubs
@DPTubs 2 года назад
I have similar videos with a voice over
@joshuacarey9367
@joshuacarey9367 Год назад
😂how the f did you do that?
@DPTubs
@DPTubs Год назад
Very carefully lol
@laverdad6120
@laverdad6120 2 года назад
Thanks for no showing All info
@DPTubs
@DPTubs 2 года назад
No worries
@Wesmancan
@Wesmancan 2 месяца назад
Sloppy Joe
@syedjavedahmad9719
@syedjavedahmad9719 2 года назад
If you don't tell what materials to use and steps to follow, it is a waste of time. 👎👎👎👎
@DPTubs
@DPTubs 2 года назад
Sorry for wasting your time. You can always ask and if your nice maybe I will tell you! LOL!
@tonyburry9036
@tonyburry9036 2 года назад
😂😂😂🤦🏻‍♂️
@sylphidscribbles9696
@sylphidscribbles9696 2 года назад
You're a waste of time. Make your own video or learn to ask nicely.
@Eric-us1wc
@Eric-us1wc Год назад
Or you could use your brain and figure it out yourself. You have unlimited resources to find any information you would ever need but you are too lazy and just expect people to make it easy for you
@davidmeek3104
@davidmeek3104 3 года назад
Looks bad
@DPTubs
@DPTubs 3 года назад
Bad to the Bone!
@foncarelli
@foncarelli 2 года назад
Looks badass
@justindale2844
@justindale2844 Год назад
I do this work that is not a bad repair he made it look easy.. it’s not
@foxytlbrider2569
@foxytlbrider2569 2 года назад
Just saw this. Fixing bathtubs seems to be hard. But you are doing a great job! You are the one that is more perfect than any other videos from others. As you can not notice the outlines that much. Good job man!
@adrianamartinez937
@adrianamartinez937 2 года назад
That's all nice but what product did you use?? And how long between time was waited??
@davidmeek3104
@davidmeek3104 3 года назад
I would have figured that would have been the time to get rid of the tub but I love what you're doing it looks good
@mrzooropa93
@mrzooropa93 3 года назад
That's incredible! Nice work! What's that fabric you used before you applied the fibreglass resin? I'm looking to repair a hole in my bath tub too, so knowing all the materials would be handy.
@Squid165
@Squid165 2 года назад
Bondo Fiberglass Mat
@unitedairco.5140
@unitedairco.5140 2 года назад
3M fiberglass cloth
@terrilambert2788
@terrilambert2788 Год назад
You need to give step by step instructions
@alfredsyncman1249
@alfredsyncman1249 Год назад
Bro I understand you doing the job and showing your talent but you do not say anything about what you use? How long the cure time? What are the steps? We are not genius you know!… 😊
@DPTubs
@DPTubs Год назад
There are about 5-10 other videos for you to watch and gather the information. If you are coming to learn in one video then you will have trouble. You must watch a few to really see how to handle a repair. THanks for watching Bro!
@Anvilosrs
@Anvilosrs 2 года назад
I had someone come repair a crack just like this on my bathtub, couple weeks later i stepped on it and it cracked. The guy said he would return and fix it again and this time drill holes around it and fill it with some foam. Is that going to help with me not cracking it when I’m showering , its hard for me shower and trying to avoid that area! The crack is on the floor.
@KevMich
@KevMich 8 месяцев назад
My fiancé due to her health has to sit in a chair to take a shower, I am here because the chair leg has put a quarter size hole on the back corner of the tub just about where it’s flat going up the wall… I had thought of plugging it, putting tape and maybe bondo or something. Need ideas please
@strophish
@strophish 2 года назад
Nice job. Euro glaze is so much easier than the body filler to work with for the final coats.
@Nnnqqq689
@Nnnqqq689 3 месяца назад
is the spray paint at the final step waterproof and is it durable like how long will it last? thank you so much
@OlmanFernández-d5k
@OlmanFernández-d5k 10 дней назад
Que video más mal hecho no se vio nada 🤮🤮🤮🤮
@PhanOT11
@PhanOT11 5 месяцев назад
How can you tell the tub is fiberglass or not?
@DPTubs
@DPTubs 5 месяцев назад
Most plastic tubs are acrylic or fiberglass and the repairs are the same! They have a similar knocking sound that distinguishes them from the “ping” or echo of metal
@PhanOT11
@PhanOT11 5 месяцев назад
@@DPTubs Thanks a lot. I need to repair my mother in-law’s cracked bath tub. I will go buy all the items needed from the links you’ve provide. 👍
@blkacdevl2517
@blkacdevl2517 2 года назад
Just did this and used 2 cans of great stuff. There's nothing supporting my bath tub and I think I'm just going to keep getting cracks. I'm going to have to get a professional to install a new tub. 😔
@schoolchoice2176
@schoolchoice2176 Год назад
Will using the expandable foam to fill the hole first, then applying fiber glass patch be better?
@anahletoa6692
@anahletoa6692 3 года назад
Is it the same materials that you uses for your other bathtub repairs?
@DPTubs
@DPTubs 3 года назад
Yes
@RaviShankar-bq9ox
@RaviShankar-bq9ox 2 года назад
Hi Danny, could you please provide your contact as we need to hire your services. Tks
@gratus0824
@gratus0824 2 года назад
I wanna do this, but can I know the name of the exact product used cause I have the same size whole on my bathtub 😅
@chrisstaniforth5629
@chrisstaniforth5629 Год назад
Loved this and it gave me the ooompff to fix my own hole....wish mine worked out the same, its fixed, filled and strong withthe resin and mesh tips!! BUT my paint job lets it down and now i just have an uber glossy white square patch where my fix is..!! Ah well. Better than silicone and aluminium tape i suppose!!
@DPTubs
@DPTubs Год назад
So glad you don't have a leak anymore. What is wrong with the paint job? Send me a message with a picture on instagram and I will see how I can help you
@nadahashem4853
@nadahashem4853 Год назад
@@DPTubs what kind of painting did you use , as a last step ?
@WindOfSteel
@WindOfSteel 2 месяца назад
E veceg glupaka u zivotu nisam video
@supaklik9524
@supaklik9524 Год назад
What's the name of that in the can and white tube second treatment i seen the fiberglass resin
@jackhandey3290
@jackhandey3290 8 месяцев назад
Great job. But I would like to mention you only use/need like 8 of these items on your list to actually patch the hole(not talking about PPE and the fan). Seems like like you're adding extras to make more money off the links. Aside from PPE and the fan, you need: 1.sandpaper (or an electric sander if you want to speed up the job by 20 minutes) 2.fiber resin 3.bondo putty 4.fiberglass cloth 5.any cup/vessel that can stand up to solvents 6.Old paint brush 7.Special spray paint. 8.Something to spread evenly with Even with PPE that's like 14 out of the 23 you posted links for. But, I digress, you did do a great job and I appreciate the show.
@DPTubs
@DPTubs 8 месяцев назад
and your point is? Does a shoe salesman always come back with the shoe you asked for or another option as well? I like to give my active viewers consistent list of products that I use regularly.
@4_nikk_attor
@4_nikk_attor Год назад
And how did the tub get a hole in it?
@LSU1212
@LSU1212 Год назад
Bathtime got a little too rowdy.
@xtg_mcavoy7396
@xtg_mcavoy7396 6 месяцев назад
Do you have an instructional video of this. i have a bit of a larger hole then this in my tub and the apartmetn complex wants to charge us an outrageous amount for them to fix it
@DPTubs
@DPTubs 6 месяцев назад
I can send you a step by step for your hole if you send me a picture. However, I do charge for the time to write it up for you.
@tyb8199
@tyb8199 2 года назад
Looks like I'll be getting deposit back after all lol
@michaeljackson4472
@michaeljackson4472 2 года назад
Man where do u live I need that asap
@guskakornel4544
@guskakornel4544 5 месяцев назад
great job!thank you for teaching! :)
@terranceburgess9170
@terranceburgess9170 2 месяца назад
Hello what are all that I need to do this
@coriebenjamin7430
@coriebenjamin7430 2 года назад
What are the materials you used? Asking for me.
@sjaplumbing6167
@sjaplumbing6167 Год назад
Good job, but I have question To match the color of the tub, you paint the entire tub or just the damaged part
@DPTubs
@DPTubs Год назад
If you want the entire tub to match perfectly then you have to spray the whole tub. Otherwise know that there will be a slight variation in color
@lornes9853
@lornes9853 2 года назад
Would this work as well on a fiberglass swimming pool wall? The crack is approx. the same size. Don't see why not, but I'd like an opinion.
@candymanscott1229
@candymanscott1229 Год назад
That is the information I have been looking for without hiring a contractor.
@dianeliggett9575
@dianeliggett9575 2 года назад
So my hole is about an inch wide, at most. Got to hire someone in north San diego county to do it. Any recommendations?
@DPTubs
@DPTubs 2 года назад
Miracle Method
@julieawheeler4062
@julieawheeler4062 3 года назад
Whot did you use to fix the bath hill ?
@elizabethdavis3258
@elizabethdavis3258 2 года назад
Thanks for the helpful video! I ordered all the supplies but realized I received the fiberglass cloth, not the mat. Would the cloth hold up or do you recommend I just try to find the mat. (Fixing a large hole on a fiberglass shower back wall). Thanks!
@mateobejarano7943
@mateobejarano7943 Год назад
Im using the mat right now to fix a hole
@shelby9088
@shelby9088 2 года назад
Since that hole is so big you could do something like this to convert a jetted tub to soaker, correct? Any reason why that would be a bad idea?
@LaBelleCorisande
@LaBelleCorisande 9 месяцев назад
I’ve heard of people doing that successfully!
@mhugo9
@mhugo9 2 года назад
The outcome is great!!!! I like it!! Where did you buy the materials?? Is the paint special paint?
@DPTubs
@DPTubs 2 года назад
All material listed in description
@bigd4911
@bigd4911 2 года назад
What is the material you used for this project? Thanks in advance 🙏
@samiiam3602
@samiiam3602 3 года назад
Tools and items used?
@mrcoollu9662
@mrcoollu9662 2 года назад
What type of sand your using for this tub on the dewalt sander
@DPTubs
@DPTubs 2 года назад
120 grit
@madeleineborrett3153
@madeleineborrett3153 10 месяцев назад
And mandyb
@suzan2336
@suzan2336 Год назад
Not helpful when you dont tell products u r using, you did a nice job though
@DPTubs
@DPTubs Год назад
Yeah that’s tough! Too bad I show them and list them in the description. I also make myself available for questions
@suzan2336
@suzan2336 Год назад
@DPTubs ok I owe you an apology got frustrated after watching videos all morning didn't check the listings... nice work !
@HarryFenton6124
@HarryFenton6124 Год назад
I`ve just fitted a new bath. I wasn`t sure how solid it should be so have gone way over the top. Even wooden supports underneath and bracing on the wooden horizontal supports. Tons of glue and mastic round it. It`s going nowhere! Now we find that on filling the bath it has dozens of tiny holes in the fibreglass near the plug which are leaking through to the floor. My worry had been my plumbing leaking, not the damn bath. They are too small to notice until they leaked. The shop have offered us a replacement. It would ruin two weeks work to take it out so will try to fix myself. (Just a warning for anyone buying a new bath).
@johnnytuzi9070
@johnnytuzi9070 2 года назад
you use spray cans alot what brand and type do u recommend
@DPTubs
@DPTubs 2 года назад
I ONLY use spray cans on repairs only. Full reglazing jobs I use 24 ounces of two part coating called Resurface Solutions and spray with an HVLP Spray system. For spray can touch ups I use Rustoleum Appliance Spray White
@Z-Ack
@Z-Ack 2 года назад
That’s why theres no screwing in the shower,. Only baths,. Otherwise you end up puttin a foot through the tub, busting a kneecap on the hot water valve and in turn crank that crap up n it hits your giblets and her kitty which causes some panic on your side but pulls the lioness out of her and she grabs you up and the knees give out and both of us end up in the Er trying to explain how y’all both fell down the stairs at the same time...
@shiuchungchan2195
@shiuchungchan2195 Год назад
Can I have list items of materials?
@DPTubs
@DPTubs Год назад
Should be in the video and the description
@Arrowverse2216
@Arrowverse2216 Год назад
How long the whole process took sir.?? I just knocked a small crack in my bathtub and wanna know how long will it take to fix it.?
@sammyplueddemann2671
@sammyplueddemann2671 3 месяца назад
Looks great but what materials are you using? Some commentary with lots of details on what your doing would help.
@swapnilphondekar4966
@swapnilphondekar4966 Год назад
Can somebody plz tell me name of each thing he has applied?
@wizliller8246
@wizliller8246 2 года назад
What level sandpaper are you using?
@DPTubs
@DPTubs 2 года назад
Ranges from 80-120-220
@rimidalv7710
@rimidalv7710 3 года назад
How much would you charge for something like this man? And how long it took you to complete the job? Cheers
@DPTubs
@DPTubs 3 года назад
I charge about $400 and it takes me about 2-3 hours
@lambospyder117
@lambospyder117 3 года назад
@@DPTubs can you tell me where I can get the materials and what all is needed I just put a hole in my tub and need help
@jamskof
@jamskof Год назад
i heard it was 24hrs to fully cure, how long do you need to wait before sanding? thanks!
@AshVsYouTube
@AshVsYouTube 3 года назад
Why do you pour it on the stir stick instead of directly inside the liquid?
@DPTubs
@DPTubs 3 года назад
It goes into the liquid. 10 drops for every ounce of resin. Total 40 drops for the 4 ounces I mix!
@AdamWee11
@AdamWee11 Год назад
What are the 2 products you use here ?
@Clownmeati8
@Clownmeati8 Год назад
Will table top pouring epoxy work with fiberglass cloth?
@zacworld2061
@zacworld2061 2 года назад
This is a great video and I appreciate that you put it up. I am a total novice and I have a similar large hole in my fiberglass shower that I want to repair. Do you have a step-by-step detailed method for doing this method that’s a bit easier for someone like me who’s never done this before to follow? Thanks!
@DPTubs
@DPTubs 2 года назад
These are the exact steps I take. If you have any questions along the way feel free to message me on Instagram DP Tubs
@zacworld2061
@zacworld2061 2 года назад
@@DPTubs I understand that but I don't know the names of any of the products you're using or what you're using to buff out the area there are so many details that aren't clear just from watching that video, I just thought it might be easier for you to do another video where you are more detailed in naming all the products and not just an overview as this video is.
@DPTubs
@DPTubs 2 года назад
@@zacworld2061 Possibly...or you can message me and I can help you out. Sometimes I am doing the work at a customers house so finishing in a timely manner is still important. I will try and do better next time being more detailed.
@zacworld2061
@zacworld2061 2 года назад
@@DPTubs Thanks, I wish I was better at this kind of work and could just figure it out figure it out based on the video but I'm very intimidated when it comes to this kind of stuff. Thanks for your reply, take care.
@steveboyer6346
@steveboyer6346 2 года назад
@@DPTubs Yes the video was good but you did not show products or explain what you were doing. Like looking at pictures of instructions with no words.
@andrewabel8652
@andrewabel8652 4 месяца назад
Thank you this helped me patch a tub it wasn't that hard at all
@zianepro6531
@zianepro6531 Год назад
Il faut mentionner les nom s des produits dans chaque etapes. Merci
@TheRockhavok
@TheRockhavok Год назад
Yes, it's fixed... But WTF made the hole??
Далее
How to Fill a Hole in a Fiberglass Tub
7:32
Просмотров 223 тыс.
We finally APPROVED @ZachChoi
00:31
Просмотров 7 млн
HOW TO FIX FIBERGLASS BATHTUB EASY DIY
11:28
Просмотров 117 тыс.
HOW TO REPAIR FIBERGLASS DAMAGE WITH LIMITED ACCESS!
24:55
Why Millions Get Silicone Caulk Wrong
5:23
Просмотров 1 млн